[PATCH] iio: light: acpi-als: Report data as processed rather than raw

[Gabriele Mazzotta]

As per the ACPI specification (Revision 5.0) [1], the data coming
from the sensor represent the ambient light illuminance reading
expressed in lux. Use IIO_CHAN_INFO_PROCESSED instead of
IIO_CHAN_INFO_RAW to signify that the data are pre-processed.

[1] http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf

Signed-off-by: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
---
 drivers/iio/light/acpi-als.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/light/acpi-als.c b/drivers/iio/light/acpi-als.c
index 60537ec..a53be07 100644
--- a/drivers/iio/light/acpi-als.c
+++ b/drivers/iio/light/acpi-als.c
@@ -54,7 +54,7 @@ static const struct iio_chan_spec acpi_als_channels[] = {
 			.realbits	= 32,
 			.storagebits	= 32,
 		},
-		.info_mask_separate	= BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_separate	= BIT(IIO_CHAN_INFO_PROCESSED),
 	},
 };
 
@@ -152,7 +152,7 @@ static int acpi_als_read_raw(struct iio_dev *indio_dev,
 	s32 temp_val;
 	int ret;
 
-	if (mask != IIO_CHAN_INFO_RAW)
+	if (mask != IIO_CHAN_INFO_PROCESSED)
 		return -EINVAL;
 
 	/* we support only illumination (_ALI) so far. */
-- 
2.7.0.rc3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/