Re: [PATCH 2/3] dt-bindings: regulator/mfd: Reorganize S5M8767 bindings

From: Lee Jones
Date: Mon Jan 11 2016 - 02:51:29 EST

Next message: Lee Jones: "Re: [PATCH 3/3] dt-bindings: regulator/mfd: Reorganize S2MPA01 bindings"
Previous message: Lee Jones: "Re: [PATCH 1/3] dt-bindings: regulator/clock/mfd: Reorganize S2MPS-family bindings"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, 04 Dec 2015, Krzysztof Kozlowski wrote:

> The regulator/s5m8767-regulator.txt duplicates some of the information
> about bindings with old mfd/s2mps11.txt. Now common part exists entirely
> in mfd/samsung,sec-core.txt so:
> - add company prefix to file name (regulator/samsung,s5m8767.txt),
> - remove duplicated information,
> - reorganize the contents to match style of
> regulator/samsung,s2mps11.txt.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/mfd/samsung,sec-core.txt | 4 +-
> .../bindings/regulator/s5m8767-regulator.txt | 163 ---------------------
> .../bindings/regulator/samsung,s5m8767.txt | 145 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 4 files changed, 149 insertions(+), 165 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
> index ef0166d0f643..4aeb95c82304 100644
> --- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
> +++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
> @@ -14,6 +14,7 @@ addressed by the host system using different I2C slave addresses.
> This document describes bindings for main device node. Optional sub-blocks
> must be a sub-nodes to it. Bindings for them can be found in:
> - bindings/regulator/samsung,s2mps11.txt
> + - bindings/regulator/samsung,s5m8767.txt
> - bindings/clock/samsung,s2mps11.txt
>
>
> @@ -23,7 +24,8 @@ Required properties:
> - "samsung,s2mps13-pmic",
> - "samsung,s2mps14-pmic",
> - "samsung,s2mps15-pmic",
> - - "samsung,s2mpu02-pmic".
> + - "samsung,s2mpu02-pmic",
> + - "samsung,s5m8767-pmic".
> - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
>
> Optional properties:
> diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
> deleted file mode 100644
> index 20191315e444..000000000000
> --- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
> +++ /dev/null
> @@ -1,163 +0,0 @@
> -* Samsung S5M8767 Voltage and Current Regulator
> -
> -The Samsung S5M8767 is a multi-function device which includes voltage and
> -current regulators, rtc, charger controller and other sub-blocks. It is
> -interfaced to the host controller using a i2c interface. Each sub-block is
> -addressed by the host system using different i2c slave address. This document
> -describes the bindings for 'pmic' sub-block of s5m8767.
> -
> -Required properties:
> -- compatible: Should be "samsung,s5m8767-pmic".
> -- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
> -
> -- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
> - units for buck2 when changing voltage using gpio dvs. Refer to [1] below
> - for additional information.
> -
> -- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
> - units for buck3 when changing voltage using gpio dvs. Refer to [1] below
> - for additional information.
> -
> -- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
> - units for buck4 when changing voltage using gpio dvs. Refer to [1] below
> - for additional information.
> -
> -- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
> - for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
> -
> -[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
> - property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
> - property should specify atleast one voltage level (which would be a
> - safe operating voltage).
> -
> - If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
> - property is specified, then all the eight voltage values for the
> - 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
> -
> -Optional properties:
> -- interrupt-parent: Specifies the phandle of the interrupt controller to which
> - the interrupts from s5m8767 are delivered to.
> -- interrupts: Interrupt specifiers for two interrupt sources.
> - - First interrupt specifier is for 'irq1' interrupt.
> - - Second interrupt specifier is for 'alert' interrupt.
> -- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
> -- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
> -- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
> -
> -Additional properties required if either of the optional properties are used:
> -
> -- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
> - the possible 8 options selectable by the dvs gpios. The value of this
> - property should be between 0 and 7. If not specified or if out of range, the
> - default value of this property is set to 0.
> -
> -- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
> - for dvs. The format of the gpio specifier depends in the gpio controller.
> -
> -Regulators: The regulators of s5m8767 that have to be instantiated should be
> -included in a sub-node named 'regulators'. Regulator nodes included in this
> -sub-node should be of the format as listed below.
> -
> - regulator_name {
> - ldo1_reg: LDO1 {
> - regulator-name = "VDD_ALIVE_1.0V";
> - regulator-min-microvolt = <1100000>;
> - regulator-max-microvolt = <1100000>;
> - regulator-always-on;
> - regulator-boot-on;
> - op_mode = <1>; /* Normal Mode */
> - };
> - };
> -The above regulator entries are defined in regulator bindings documentation
> -except these properties:
> - - op_mode: describes the different operating modes of the LDO's with
> - power mode change in SOC. The different possible values are,
> - 0 - always off mode
> - 1 - on in normal mode
> - 2 - low power mode
> - 3 - suspend mode
> - - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
> - GPIO controlling this regulator (enable/disable); This is
> - valid only for buck9.
> -
> -The following are the names of the regulators that the s5m8767 pmic block
> -supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
> -as per the datasheet of s5m8767.
> -
> - - LDOn
> - - valid values for n are 1 to 28
> - - Example: LDO1, LDO2, LDO28
> - - BUCKn
> - - valid values for n are 1 to 9.
> - - Example: BUCK1, BUCK2, BUCK9
> -
> -The bindings inside the regulator nodes use the standard regulator bindings
> -which are documented elsewhere.
> -
> -Example:
> -
> - s5m8767_pmic@66 {
> - compatible = "samsung,s5m8767-pmic";
> - reg = <0x66>;
> -
> - s5m8767,pmic-buck2-uses-gpio-dvs;
> - s5m8767,pmic-buck3-uses-gpio-dvs;
> - s5m8767,pmic-buck4-uses-gpio-dvs;
> -
> - s5m8767,pmic-buck-default-dvs-idx = <0>;
> -
> - s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
> - <&gpx0 1 0>, /* DVS2 */
> - <&gpx0 2 0>; /* DVS3 */
> -
> - s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
> - <&gpx2 4 0>, /* SET2 */
> - <&gpx2 5 0>; /* SET3 */
> -
> - s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
> - <1250000>, <1200000>,
> - <1150000>, <1100000>,
> - <1000000>, <950000>;
> -
> - s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
> - <1100000>, <1100000>,
> - <1000000>, <1000000>,
> - <1000000>, <1000000>;
> -
> - s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
> - <1200000>, <1200000>,
> - <1200000>, <1200000>,
> - <1200000>, <1200000>;
> -
> - regulators {
> - ldo1_reg: LDO1 {
> - regulator-name = "VDD_ABB_3.3V";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - op_mode = <1>; /* Normal Mode */
> - };
> -
> - ldo2_reg: LDO2 {
> - regulator-name = "VDD_ALIVE_1.1V";
> - regulator-min-microvolt = <1100000>;
> - regulator-max-microvolt = <1100000>;
> - regulator-always-on;
> - };
> -
> - buck1_reg: BUCK1 {
> - regulator-name = "VDD_MIF_1.2V";
> - regulator-min-microvolt = <950000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vemmc_reg: BUCK9 {
> - regulator-name = "VMEM_VDD_2.8V";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - op_mode = <3>; /* Standby Mode */
> - s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
> new file mode 100644
> index 000000000000..093edda0c8df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
> @@ -0,0 +1,145 @@
> +Binding for Samsung S5M8767 regulator block
> +===========================================
> +
> +This is a part of device tree bindings for S5M family multi-function devices.
> +More information can be found in bindings/mfd/sec-core.txt file.
> +
> +The S5M8767 device provide buck and LDO regulators.
> +
> +To register these with regulator framework instantiate under main device node
> +a sub-node named "regulators" with more sub-nodes for each regulator using the
> +common regulator binding documented in:
> + - Documentation/devicetree/bindings/regulator/regulator.txt
> +
> +
> +Required properties of the main device node (the parent!):
> + - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
> + units for buck2 when changing voltage using gpio dvs. Refer to [1] below
> + for additional information.
> +
> + - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
> + units for buck3 when changing voltage using gpio dvs. Refer to [1] below
> + for additional information.
> +
> + - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
> + units for buck4 when changing voltage using gpio dvs. Refer to [1] below
> + for additional information.
> +
> + - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
> + for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
> +
> + [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
> + property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
> + property should specify atleast one voltage level (which would be a
> + safe operating voltage).
> +
> + If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
> + property is specified, then all the eight voltage values for the
> + 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
> +
> +Optional properties of the main device node (the parent!):
> + - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
> + - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
> + - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
> +
> +Additional properties required if either of the optional properties are used:
> +
> + - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
> + the possible 8 options selectable by the dvs gpios. The value of this
> + property should be between 0 and 7. If not specified or if out of range, the
> + default value of this property is set to 0.
> +
> + - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
> + for dvs. The format of the gpio specifier depends in the gpio controller.
> +
> +
> +Names of regulators supported by S5M8767 device:
> + - LDOn
> + - valid values for n are 1 to 28
> + - Example: LDO1, LDO2, LDO28
> + - BUCKn
> + - valid values for n are 1 to 9.
> + - Example: BUCK1, BUCK2, BUCK9
> +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
> +as per the datasheet of device.
> +
> +
> +Optional properties of the nodes under "regulators" sub-node:
> + - op_mode: describes the different operating modes of the LDO's with
> + power mode change in SOC. The different possible values are,
> + 0 - always off mode
> + 1 - on in normal mode
> + 2 - low power mode
> + 3 - suspend mode
> + - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
> + GPIO controlling this regulator
> + (enable/disable); This is valid only
> + for buck9.
> +
> +Example:
> +
> + s5m8767_pmic@66 {
> + compatible = "samsung,s5m8767-pmic";
> + reg = <0x66>;
> +
> + s5m8767,pmic-buck2-uses-gpio-dvs;
> + s5m8767,pmic-buck3-uses-gpio-dvs;
> + s5m8767,pmic-buck4-uses-gpio-dvs;
> +
> + s5m8767,pmic-buck-default-dvs-idx = <0>;
> +
> + s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
> + <&gpx0 1 0>, /* DVS2 */
> + <&gpx0 2 0>; /* DVS3 */
> +
> + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
> + <&gpx2 4 0>, /* SET2 */
> + <&gpx2 5 0>; /* SET3 */
> +
> + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
> + <1250000>, <1200000>,
> + <1150000>, <1100000>,
> + <1000000>, <950000>;
> +
> + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
> + <1100000>, <1100000>,
> + <1000000>, <1000000>,
> + <1000000>, <1000000>;
> +
> + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
> + <1200000>, <1200000>,
> + <1200000>, <1200000>,
> + <1200000>, <1200000>;
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VDD_ABB_3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + op_mode = <1>; /* Normal Mode */
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VDD_ALIVE_1.1V";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "VDD_MIF_1.2V";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vemmc_reg: BUCK9 {
> + regulator-name = "VMEM_VDD_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + op_mode = <3>; /* Standby Mode */
> + s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
> + };
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 137284e37250..7e1db5746ee4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9233,9 +9233,9 @@ F: drivers/regulator/s5m*.c
> F: drivers/clk/clk-s2mps11.c
> F: drivers/rtc/rtc-s5m.c
> F: include/linux/mfd/samsung/
> -F: Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
> F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
> F: Documentation/devicetree/bindings/regulator/samsung,s2m*.txt
> +F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
> F: Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
>
> SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Next message: Lee Jones: "Re: [PATCH 3/3] dt-bindings: regulator/mfd: Reorganize S2MPA01 bindings"
Previous message: Lee Jones: "Re: [PATCH 1/3] dt-bindings: regulator/clock/mfd: Reorganize S2MPS-family bindings"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]