Re: [PATCH v3 1/2] power: act8945a: add charger driver for ACT8945A

[Krzysztof Kozlowski]

On 13.01.2016 12:53, Yang, Wenyou wrote:
> Hi Krzysztof,
> 
> Thank you!
> 
>> -----Original Message-----
>> From: Krzysztof Kozlowski [mailto:k.kozlowski@xxxxxxxxxxx]
>> Sent: 2016å1æ13æ 10:12
>> To: Yang, Wenyou <Wenyou.Yang@xxxxxxxxx>; Sebastian Reichel
>> <sre@xxxxxxxxxx>; Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>; David
>> Woodhouse <dwmw2@xxxxxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Pawel
>> Moll <pawel.moll@xxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>; Ian
>> Campbell <ijc+devicetree@xxxxxxxxxxxxxx>; Kumar Gala <galak@xxxxxxxxxxxxxx>
>> Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxx>; Lee Jones
>> <lee.jones@xxxxxxxxxx>; Ferre, Nicolas <Nicolas.FERRE@xxxxxxxxx>; linux-arm-
>> kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-
>> pm@xxxxxxxxxxxxxxx
>> Subject: Re: [PATCH v3 1/2] power: act8945a: add charger driver for ACT8945A
>>
>> On 12.01.2016 17:09, Wenyou Yang wrote:
>>> This patch adds new driver for Active-semi ACT8945A ActivePath charger
>>> (part of ACT8945A MFD driver) providing power supply class information
>>> to userspace.
>>>
>>> The driver is configured through DTS (battery and system related
>>> settings) and sysfs entries (timers and input over-voltage threshold).
>>>
>>> Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx>
>>> ---
>>>
>>> Changes in v3:
>>>  - update the file header with short version license and author line.
>>>  - remove unused member of struct act8945a_charger, dev.
>>>  - action due to removing the member of stuct act8945a_dev, dev.
>>>  - remove the unnecessary print out.
>>>  - remove the unnecessary act8945a_charger_remove().
>>>  - fix align of the code-style.
>>>
>>> Changes in v2:
>>>  1./ Substitute of_property_read_bool() for of_get_property().
>>>  2./ Substitute devm_power_supply_register() for power_supply_register().
>>>  3./ Use module_platform_driver(), instead of subsys_initcall().
>>>  4./ Substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
>>>
>>>  drivers/power/Kconfig            |    7 +
>>>  drivers/power/Makefile           |    1 +
>>>  drivers/power/act8945a_charger.c |  367
>>> ++++++++++++++++++++++++++++++++++++++
>>>  3 files changed, 375 insertions(+)
>>>  create mode 100644 drivers/power/act8945a_charger.c
>>>
>>> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index
>>> 1ddd13c..ae75211 100644
>>> --- a/drivers/power/Kconfig
>>> +++ b/drivers/power/Kconfig
>>> @@ -75,6 +75,13 @@ config BATTERY_88PM860X
>>>  	help
>>>  	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
>>>
>>> +config BATTERY_ACT8945A
>>> +	tristate "Active-semi ACT8945A charger driver"
>>> +	depends on MFD_ACT8945A
>>> +	help
>>> +	  Say Y here to enable support for power supply provided by
>>> +	  Active-semi ActivePath ACT8945A charger.
>>> +
>>>  config BATTERY_DS2760
>>>  	tristate "DS2760 battery driver (HP iPAQ & others)"
>>>  	depends on W1 && W1_SLAVE_DS2760
>>> diff --git a/drivers/power/Makefile b/drivers/power/Makefile index
>>> 0e4eab5..e46b75d 100644
>>> --- a/drivers/power/Makefile
>>> +++ b/drivers/power/Makefile
>>> @@ -17,6 +17,7 @@ obj-$(CONFIG_WM8350_POWER)	+=
>> wm8350_power.o
>>>  obj-$(CONFIG_TEST_POWER)	+= test_power.o
>>>
>>>  obj-$(CONFIG_BATTERY_88PM860X)	+= 88pm860x_battery.o
>>> +obj-$(CONFIG_BATTERY_ACT8945A)	+= act8945a_charger.o
>>>  obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
>>>  obj-$(CONFIG_BATTERY_DS2780)	+= ds2780_battery.o
>>>  obj-$(CONFIG_BATTERY_DS2781)	+= ds2781_battery.o
>>> diff --git a/drivers/power/act8945a_charger.c
>>> b/drivers/power/act8945a_charger.c
>>> new file mode 100644
>>> index 0000000..643a2ed
>>> --- /dev/null
>>> +++ b/drivers/power/act8945a_charger.c
>>> @@ -0,0 +1,367 @@
>>> +/*
>>> + * Power supply driver for the Active-semi ACT8945A PMIC
>>> + *
>>> + * Copyright (C) 2015 Atmel Corporation
>>> + *
>>> + * Author: Wenyou Yang <wenyou.yang@xxxxxxxxx>
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> +modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + *
>>> + */
>>> +#include <linux/module.h>
>>> +#include <linux/mfd/act8945a.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_gpio.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/power_supply.h>
>>> +#include <linux/regmap.h>
>>> +
>>> +static const char *act8945a_charger_model = "ACT8945A"; static const
>>> +char *act8945a_charger_manufacturer = "Active-semi";
>>> +
>>> +/**
>>> + * ACT8945A Charger Register Map
>>> + */
>>> +
>>> +/* 0x70: Reserved */
>>> +#define ACT8945A_APCH_CFG		0x71
>>> +#define ACT8945A_APCH_STATUS		0x78
>>> +#define ACT8945A_APCH_CTRL		0x79
>>> +#define ACT8945A_APCH_STATE		0x7A
>>> +
>>> +/* ACT8945A_APCH_CFG */
>>> +#define APCH_CFG_OVPSET		(0x03 << 0)
>>> +#define		APCH_CFG_OVPSET_6V6	(0x0 << 0)
>>> +#define		APCH_CFG_OVPSET_7V	(0x1 << 0)
>>> +#define		APCH_CFG_OVPSET_7V5	(0x2 << 0)
>>> +#define		APCH_CFG_OVPSET_8V	(0x3 << 0)
>>
>> Why the tabs after #define? Nooooo...
>>
>>> +#define APCH_CFG_PRETIMO	(0x03 << 2)
>>> +#define		APCH_CFG_PRETIMO_40_MIN		(0x0 << 2)
>>> +#define		APCH_CFG_PRETIMO_60_MIN		(0x1 << 2)
>>> +#define		APCH_CFG_PRETIMO_80_MIN		(0x2 << 2)
>>> +#define		APCH_CFG_PRETIMO_DISABLED	(0x3 << 2)
>>> +#define APCH_CFG_TOTTIMO	(0x03 << 4)
>>> +#define		APCH_CFG_TOTTIMO_3_HOUR		(0x0 << 4)
>>> +#define		APCH_CFG_TOTTIMO_4_HOUR		(0x1 << 4)
>>> +#define		APCH_CFG_TOTTIMO_5_HOUR		(0x2 << 4)
>>> +#define		APCH_CFG_TOTTIMO_DISABLED	(0x3 << 4)
>>> +#define APCH_CFG_SUSCHG		(0x01 << 7)
>>> +
>>> +#define APCH_STATUS_CHGDAT	(0x01 << 0)
>>> +#define APCH_STATUS_INDAT	(0x01 << 1)
>>> +#define APCH_STATUS_TEMPDAT	(0x01 << 2)
>>> +#define APCH_STATUS_TIMRDAT	(0x01 << 3)
>>> +#define APCH_STATUS_CHGSTAT	(0x01 << 4)
>>> +#define APCH_STATUS_INSTAT	(0x01 << 5)
>>> +#define APCH_STATUS_TEMPSTAT	(0x01 << 6)
>>> +#define APCH_STATUS_TIMRSTAT	(0x01 << 7)
>>> +
>>> +#define APCH_CTRL_CHGEOCOUT	(0x01 << 0)
>>> +#define APCH_CTRL_INDIS		(0x01 << 1)
>>> +#define APCH_CTRL_TEMPOUT	(0x01 << 2)
>>> +#define APCH_CTRL_TIMRPRE	(0x01 << 3)
>>> +#define APCH_CTRL_CHGEOCIN	(0x01 << 4)
>>> +#define APCH_CTRL_INCON		(0x01 << 5)
>>> +#define APCH_CTRL_TEMPIN	(0x01 << 6)
>>> +#define APCH_CTRL_TIMRTOT	(0x01 << 7)
>>
>> For the STATUS and CTRL use BIT(n) macro.
>>
>>
>>> +
>>> +#define APCH_STATE_ACINSTAT	(0x01 << 1)
>>> +#define APCH_STATE_CSTATE	(0x03 << 4)
>>> +#define APCH_STATE_CSTATE_SHIFT		4
>>> +#define		APCH_STATE_CSTATE_DISABLED	0x00
>>> +#define		APCH_STATE_CSTATE_EOC		0x01
>>> +#define		APCH_STATE_CSTATE_FAST		0x02
>>> +#define		APCH_STATE_CSTATE_PRE		0x03
>>> +
>>> +struct act8945a_charger {
>>> +	struct act8945a_dev *act8945a_dev;
>>> +	struct power_supply *psy;
>>> +
>>> +	u32 tolal_time_out;
>>> +	u32 pre_time_out;
>>> +	u32 input_voltage_threshold;
>>> +	bool battery_temperature;
>>> +	int chglev_pin;
>>> +	int chglev_value;
>>> +};
>>> +
>>> +static int act8945a_get_charger_state(struct regmap *regmap, int
>>> +*val) {
>>> +	int ret;
>>> +	unsigned int status, state;
>>> +
>>> +	ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	state &= APCH_STATE_CSTATE;
>>> +	state >>= APCH_STATE_CSTATE_SHIFT;
>>> +
>>> +	if (state == APCH_STATE_CSTATE_EOC) {
>>> +		if (status & APCH_STATUS_CHGDAT)
>>> +			*val = POWER_SUPPLY_STATUS_FULL;
>>> +		else
>>> +			*val = POWER_SUPPLY_STATUS_NOT_CHARGING;
>>> +	} else if ((state == APCH_STATE_CSTATE_FAST) ||
>>> +		   (state == APCH_STATE_CSTATE_PRE)) {
>>> +		*val = POWER_SUPPLY_STATUS_CHARGING;
>>> +	} else {
>>> +		*val = POWER_SUPPLY_STATUS_NOT_CHARGING;
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int act8945a_get_charge_type(struct regmap *regmap, int *val)
>>> +{
>>> +	int ret;
>>> +	unsigned int state;
>>> +
>>> +	ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	state &= APCH_STATE_CSTATE;
>>> +	state >>= APCH_STATE_CSTATE_SHIFT;
>>> +
>>> +	switch (state) {
>>> +	case APCH_STATE_CSTATE_PRE:
>>> +		*val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
>>> +		break;
>>> +	case APCH_STATE_CSTATE_FAST:
>>> +		*val = POWER_SUPPLY_CHARGE_TYPE_FAST;
>>> +		break;
>>> +	case APCH_STATE_CSTATE_EOC:
>>> +	case APCH_STATE_CSTATE_DISABLED:
>>> +	default:
>>> +		*val = POWER_SUPPLY_CHARGE_TYPE_NONE;
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int act8945a_get_battery_health(struct act8945a_charger *charger,
>>> +				       struct regmap *regmap, int *val) {
>>> +	int ret;
>>> +	unsigned int status;
>>> +
>>> +	ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	if (charger->battery_temperature && !(status &
>> APCH_STATUS_TEMPDAT))
>>> +		*val = POWER_SUPPLY_HEALTH_OVERHEAT;
>>> +	else if (!(status & APCH_STATUS_INDAT))
>>> +		*val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
>>> +	else if (status & APCH_STATUS_TIMRDAT)
>>> +		*val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
>>> +	else
>>> +		*val = POWER_SUPPLY_HEALTH_GOOD;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static enum power_supply_property act8945a_charger_props[] = {
>>> +	POWER_SUPPLY_PROP_STATUS,
>>> +	POWER_SUPPLY_PROP_CHARGE_TYPE,
>>> +	POWER_SUPPLY_PROP_TECHNOLOGY,
>>> +	POWER_SUPPLY_PROP_HEALTH,
>>> +	POWER_SUPPLY_PROP_MODEL_NAME,
>>> +	POWER_SUPPLY_PROP_MANUFACTURER
>>> +};
>>> +
>>> +static int act8945a_charger_get_property(struct power_supply *psy,
>>> +					 enum power_supply_property prop,
>>> +					 union power_supply_propval *val) {
>>> +	struct act8945a_charger *charger = power_supply_get_drvdata(psy);
>>> +	struct regmap *regmap = charger->act8945a_dev->regmap;
>>> +	int ret = 0;
>>> +
>>> +	switch (prop) {
>>> +	case POWER_SUPPLY_PROP_STATUS:
>>> +		ret = act8945a_get_charger_state(regmap, &val->intval);
>>> +		break;
>>> +	case POWER_SUPPLY_PROP_CHARGE_TYPE:
>>> +		ret = act8945a_get_charge_type(regmap, &val->intval);
>>> +		break;
>>> +	case POWER_SUPPLY_PROP_TECHNOLOGY:
>>> +		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
>>> +		break;
>>> +	case POWER_SUPPLY_PROP_HEALTH:
>>> +		ret = act8945a_get_battery_health(charger,
>>> +						  regmap, &val->intval);
>>> +		break;
>>> +	case POWER_SUPPLY_PROP_MODEL_NAME:
>>> +		val->strval = act8945a_charger_model;
>>> +		break;
>>> +	case POWER_SUPPLY_PROP_MANUFACTURER:
>>> +		val->strval = act8945a_charger_manufacturer;
>>> +		break;
>>> +	default:
>>> +		return -EINVAL;
>>> +	}
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static const struct power_supply_desc act8945a_charger_desc = {
>>> +	.name		= "act8945a-charger",
>>> +	.type		= POWER_SUPPLY_TYPE_BATTERY,
>>> +	.get_property	= act8945a_charger_get_property,
>>> +	.properties	= act8945a_charger_props,
>>> +	.num_properties	= ARRAY_SIZE(act8945a_charger_props),
>>> +};
>>> +
>>> +#define DEFAULT_TOTAL_TIME_OUT		3
>>> +#define DEFAULT_PRE_TIME_OUT		40
>>> +#define DEFAULT_INPUT_OVP_THRESHOLD	6600
>>> +
>>> +static int act8945a_charger_parse_dt(struct device *dev,
>>> +				     struct act8945a_charger *charger) {
>>> +	struct device_node *np = dev->of_node;
>>> +	enum of_gpio_flags flags;
>>> +
>>> +	if (!np) {
>>> +		dev_err(dev, "no charger of node\n");
>>> +		return -EINVAL;
>>> +	}
>>> +
>>> +	charger->chglev_pin = of_get_named_gpio_flags(np,
>>> +				"active-semi,chglev-gpio", 0, &flags);
>>> +
>>> +	charger->chglev_value = (flags == OF_GPIO_ACTIVE_LOW) ? 0 : 1;
>>> +
>>> +	charger->battery_temperature = of_property_read_bool(np,
>>> +					"active-semi,battery_temperature");
>>> +
>>> +	if (of_property_read_u32(np, "active-semi,input_voltage_threshold",
>>> +				 &charger->input_voltage_threshold))
>>> +		charger->input_voltage_threshold = DEFAULT_PRE_TIME_OUT;
>>> +
>>> +	if (of_property_read_u32(np, "active-semi,precondition_timeout",
>>> +				 &charger->pre_time_out))
>>> +		charger->pre_time_out = DEFAULT_PRE_TIME_OUT;
>>> +
>>> +	if (of_property_read_u32(np, "active-semi,total_timeout",
>>> +				 &charger->tolal_time_out))
>>> +		charger->tolal_time_out = DEFAULT_TOTAL_TIME_OUT;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int act8945a_charger_config(struct act8945a_charger *charger)
>>> +{
>>> +	struct regmap *regmap = charger->act8945a_dev->regmap;
>>> +	u8 value = 0;
>>
>> Regmap uses "unsigned int". I think it is better not to mix it so use in the driver
>> "unsigned int" for interactions with regmap.
> 
> I checked, it seems they are not mixed in the patch. Or I am wrong?

I mean that use "unsigned int value = 0;" here. You're going cast it
anyway to unsigned int when calling regmap functions.

> 
>>
>> [...]
>>
>> Javier pointed the auto-loading issue before (because you are not providing any
>> device table). Probably that is not what you want.
> 
> Yes, but I  still don't understand for now ...

Try building this as module and check whether it got automatically
loaded during boot. :)

Best regards,
Krzysztof