[PATCH v5 13/15] tty: serial: 8250: Fix indentation warnings

[Anton Wuerfel]

Checkpatch complains about incorrect indentation of switch/case statements.
This patch fixes the corresponding warnings. Additionally some indentation
is changed to match the correct format specified in the Linux Kernel
Coding Style.

Signed-off-by: Anton WÃrfel <anton.wuerfel@xxxxxx>
Signed-off-by: Phillip Raffeck <phillip.raffeck@xxxxxx>
Cc: linux-kernel@xxxxxxxxxxxx
---
 drivers/tty/serial/8250/8250_pci.c  | 20 ++++++++++----------
 drivers/tty/serial/8250/8250_pnp.c  |  4 ++--
 drivers/tty/serial/8250/8250_port.c |  6 +++---
 3 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 433afdd..1dd607f 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -841,17 +841,17 @@ static int pci_netmos_init(struct pci_dev *dev)
 		return 0;
 
 	switch (dev->device) { /* FALLTHROUGH on all */
-		case PCI_DEVICE_ID_NETMOS_9904:
-		case PCI_DEVICE_ID_NETMOS_9912:
-		case PCI_DEVICE_ID_NETMOS_9922:
-		case PCI_DEVICE_ID_NETMOS_9900:
-			num_serial = pci_netmos_9900_numports(dev);
-			break;
+	case PCI_DEVICE_ID_NETMOS_9904:
+	case PCI_DEVICE_ID_NETMOS_9912:
+	case PCI_DEVICE_ID_NETMOS_9922:
+	case PCI_DEVICE_ID_NETMOS_9900:
+		num_serial = pci_netmos_9900_numports(dev);
+		break;
 
-		default:
-			if (num_serial == 0) {
-				moan_device("unknown NetMos/Mostech device", dev);
-			}
+	default:
+		if (num_serial == 0) {
+			moan_device("unknown NetMos/Mostech device", dev);
+		}
 	}
 
 	if (num_serial == 0)
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 9305591..a11180d 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -427,8 +427,8 @@ static int check_resources(struct pnp_dev *dev)
 static int serial_pnp_guess_board(struct pnp_dev *dev)
 {
 	if (!(check_name(pnp_dev_name(dev)) ||
-		(dev->card && check_name(dev->card->name))))
-			return -ENODEV;
+	    (dev->card && check_name(dev->card->name))))
+		return -ENODEV;
 
 	if (check_resources(dev))
 		return 0;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 343d050..da3b240 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2235,9 +2235,9 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
 		serial_port_out(port, 0x2, quot_frac);
 }
 
-static unsigned int
-serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
-			 struct ktermios *old)
+static unsigned int serial8250_get_baud_rate(struct uart_port *port,
+					     struct ktermios *termios,
+					     struct ktermios *old)
 {
 	unsigned int tolerance = port->uartclk / 100;
 
-- 
1.9.1