Re: [ANNOUNCE] 4.4-rc6-rt1

[Mike Galbraith]

On Thu, 2016-01-14 at 15:30 +0100, Thomas Gleixner wrote:
> On Thu, 14 Jan 2016, Mike Galbraith wrote:
> 
> > On Thu, 2016-01-14 at 15:17 +0100, Sebastian Andrzej Siewior wrote:
> > > * Sebastian Andrzej Siewior | 2016-01-13 18:58:45 [+0100]:
> > > 
> > > > This is due to NO_HZ as far as I can tell. My AMD A10 in idle
> mode
> > > > has
> > > > 0.7% utilisation of ksoftirqd/ with CONFIG_HZ_PERIODIC and with
> > > > CONFIG_NO_HZ_FULL it shows about 25% on all CPU threads.
> > > 
> > > This should fixed it:
> > > 
> > > --- a/kernel/time/timer.c
> > > +++ b/kernel/time/timer.c
> > > @@ -1453,7 +1453,7 @@ u64 get_next_timer_interrupt(unsigned long
> > > basej, u64 basem)
> > >      * the base lock to check when the next timer is pending and
> > > so
> > >      * we assume the next jiffy.
> > >      */
> > > -   return basej;
> > > +   return basem + TICK_NSEC;
> > >  #endif
> > >     spin_lock(&base->lock);
> > >     if (base->active_timers) {
> > 
> > That's what I had done to stop the screaming interrupt, but box
> still
> > behaved very badly.
> 
> If you turn off CONFIG_NO_HZ_FULL and switch to NO_HZ_IDLE is it
> still bad?

I didn't have CONFIG_NO_HZ_FULL enabled, it was CONFIG_NO_HZ_IDLE.

	-Mike