Re: [PATCH v3 3/4] USB: serial: cp210x: Switch to new 8-bit and 32-bit register access functions.

[Martyn Welch]

On 02/01/16 03:12, Konstantin Shkolnyy wrote:
> Change to use new 8-bit and 32-bit register access functions instead of
> cp210x_get_config and cp210x_set_config.
>
> Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@xxxxxxxxx>

Acked-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>

> ---
> change in v3: Presented new function addition as a separate patch #1,
> to simplify code review.
>
>   drivers/usb/serial/cp210x.c | 11 +++++------
>   1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
> index 7a91c6c..1339d77 100644
> --- a/drivers/usb/serial/cp210x.c
> +++ b/drivers/usb/serial/cp210x.c
> @@ -787,10 +787,10 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
>   {
>   	struct device *dev = &port->dev;
>   	unsigned int cflag, modem_ctl[4];
> -	unsigned int baud;
> +	u32 baud;
>   	u16 bits;
>
> -	cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
> +	cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
>
>   	dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
>   	*baudp = baud;
> @@ -937,8 +937,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
>   	baud = cp210x_quantise_baudrate(baud);
>
>   	dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
> -	if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
> -							sizeof(baud))) {
> +	if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
>   		dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
>   		if (old_termios)
>   			baud = old_termios->c_ospeed;
> @@ -1109,10 +1108,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
>   static int cp210x_tiocmget(struct tty_struct *tty)
>   {
>   	struct usb_serial_port *port = tty->driver_data;
> -	unsigned int control;
> +	u8 control;
>   	int result;
>
> -	cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
> +	cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
>
>   	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
>   		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)