Re: [PATCH 14/14] ARM: dts: imx6: make audmux optional for i.MX6UL sound driver

[Rob Herring]

On Tue, Jan 12, 2016 at 06:21:31PM +0100, Lothar Waßmann wrote:
> i.MX6UL does not have the audio multiplexer (AUDMUX) like the other
> i.MX6 SoCs, but apart from that can use the same audio driver. Make
> audmux optional for the imx-sgtl5000 driver, so it can be used on
> i.MX6UL too. Furthermore i.MX6UL requires use of the SAI interface
> rather than SSI. Change the DTS documentation accordingly.
> 
> The patch with the corresponding changes to the imx-sgtl5000 driver
> will be sent separately.
> 
> Signed-off-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
> ---
>  .../bindings/sound/imx-audio-sgtl5000.txt          | 26 +++++++++++++++++++++-
>  1 file changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
> index 2f89db8..fd46671 100644
> --- a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
> +++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
> @@ -6,7 +6,7 @@ Required properties:
>  
>    - model		: The user-visible name of this sound complex
>  
> -  - ssi-controller	: The phandle of the i.MX SSI controller
> +  - ssi-controller	: The phandle of the i.MX SSI (or SAI) controller
>  
>    - audio-codec		: The phandle of the SGTL5000 audio codec
>  
> @@ -39,6 +39,16 @@ Required properties:
>  Note: The AUDMUX port numbering should start at 1, which is consistent with
>  hardware manual.
>  
> +Optional properties:
> +  - fsl,no-audmux	: boolean
> +    			  Required for i.MX6UL (and maybe other SoCs)
> +    			  which don't have an AUDMUX, but still
> +			  feature the same audio subsystem otherwise.

It would have been better if this was a phandle to the audmux and lack 
of the property meant no audmux. Too late for that I guess.

Acked-by: Rob Herring <robh@xxxxxxxxxx>

Rob