Re: [PATCH v1 1/2] usb:dwc3: Enable support for 64-bit system
From: Thang Q. Nguyen
Date: Thu Jan 14 2016 - 22:50:43 EST
Hi Balbi,
On Thu, Jan 14, 2016 at 10:47 PM, Felipe Balbi <balbi@xxxxxxxxxx> wrote:
>
>
> Hi,
>
> "Thang Q. Nguyen" <tqnguyen@xxxxxxx> writes:
> > Add 64-bit DMA operation support to the USB DWC3 driver.
> > First attempt to set the coherent DMA mask for 64-bit DMA.
> > If that failed, attempt again with 32-bit DMA.
> >
> > Signed-off-by: Thang Q. Nguyen <tqnguyen@xxxxxxx>
> > ---
> > drivers/usb/dwc3/core.c | 15 +++++++++++++++
> > 1 file changed, 15 insertions(+)
> >
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index 22b47973..9818d6b 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -829,6 +829,21 @@ static int dwc3_probe(struct platform_device *pdev)
> > dwc->mem = mem;
> > dwc->dev = dev;
> >
> > + /* Try to set 64-bit DMA first */
> > + if (WARN_ON(!pdev->dev.dma_mask))
>
> why the WARN_ON() ?
In my opinion, pdev->dev.dma_mask is expected to be set correctly. And
the issue happen just in case of DT boot and CONFIG_DMA_CMA=n, the
pdev->dev.dma_mask value is not set. So, I set WARN_ON there to notify
that we expect pdev->dev.dma_mask set but not.
>
> > + /* Platform did not initialize dma_mask */
> > + ret = dma_coerce_mask_and_coherent(&pdev->dev,
> > + DMA_BIT_MASK(64));
> > + else
> > + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
> > +
> > + /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
> > + if (ret) {
>
> this will try 32-bit if 32-bit fails too.
There are 2 cases for dma_mask: 32-bit and 64-bit. In case the system
is 64-bit, the setting of 64-bit will return 0. Otherwise, setting
32-bit dma_mask should work.
This change is similar to commit
0ebbe398f68be0d9bbd41dcfb57319e697756b37 on
drivers/usb/host/xhci-plat.c.
>
> > + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> > + if (ret)
> > + return ret;
> > + }
> > +
> > res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> > if (!res) {
> > dev_err(dev, "missing IRQ\n");
> > --
> > 2.2.0
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> balbi
--
Thang Q. Nguyen | Staff SW Eng.
C: +849.7684.7606 | O: +848.3770.0640
F: +848.3770.0641 | tqnguyen@xxxxxxx