[PATCH v2] i2c/designware: enable i2c controller to suspend/resume asynchronously

From: Fu, Zhonghui
Date: Fri Jan 15 2016 - 01:38:22 EST


Now, PM core supports asynchronous suspend/resume mode for devices
during system suspend/resume, and the power state transition of one
device may be completed in separate kernel thread. PM core ensures
all power state transition dependency between devices. This patch
enables designware i2c controllers to suspend/resume asynchronously.
This will take advantage of multicore and improve system suspend/resume
speed. After enabling all i2c devices, i2c adapters and i2c controllers
on ASUS T100TA tablet, the system suspend-to-idle time is reduced to
about 510ms from 750ms, and the system resume time is reduced to about
790ms from 900ms.

Signed-off-by: Zhonghui Fu <zhonghui.fu@xxxxxxxxxxxxxxx>
---
Changes in v2:
- Move the device_enable_async_suspend() call into i2c_dw_proble()

drivers/i2c/busses/i2c-designware-core.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index ba9732c..5d6ad27 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -861,6 +861,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)

init_completion(&dev->cmd_complete);
mutex_init(&dev->lock);
+ device_enable_async_suspend(dev->dev);

r = i2c_dw_init(dev);
if (r)
-- 1.7.1