Re: [PATCH v5 1/6] clk: hisilicon: add CRG driver for hi3519 soc

From: xuejiancheng
Date: Fri Jan 15 2016 - 03:03:29 EST

Next message: Luca Abeni: "Re: [RFC 5/8] Track the "total rq utilisation" too"
Previous message: Li Yang: "[PATCH v3] i2c: imx: make bus recovery through pinctrl optional"
In reply to: xuejiancheng: "Re: [PATCH v5 1/6] clk: hisilicon: add CRG driver for hi3519 soc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2016/1/14 21:16, xuejiancheng wrote:
> Hi Mike,
>
> On 2016/1/14 2:57, Michael Turquette wrote:
>> Quoting xuejiancheng (2016-01-12 19:03:01)
>>> Hi Stephen,
>>> Thank you very much for your reply.
>>>
>>> On 2016/1/13 6:12, Stephen Boyd wrote:
>>>> On 01/08, Jiancheng Xue wrote:
>>>>> diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig
>>>>> index e434854..b6baebf 100644
>>>>> --- a/drivers/clk/hisilicon/Kconfig
>>>>> +++ b/drivers/clk/hisilicon/Kconfig
>>>>> @@ -1,3 +1,10 @@
>>>>> +config COMMON_CLK_HI3519
>>>>> + tristate "Clock Driver for Hi3519"
>>>>
>>>> It looks like this has to be bool. Otherwise it needs to be a
>>>> platform driver and the hisilicon APIs need to be exported and
>>>> lose their __init markings.
>>>>
>>> Yes,it's a problem. I will fix it in next version. Thank you.
>>
>> The best solution would be to make this clock driver a real platform
>> driver.
>>
> Now the work clock of the clocksource timer-sp804 is provided by this driver. So
> it need to be registered early by CLK_OF_DECLARE. If the timer clock is treated
> as a fixed-clock provider, this driver can be implemented as a platform driver.
> Then the crg device must be registered before other clock consumer devices.Accordingly
> the crg device node must be written above all other clock consumer devices node in dts files.
> I think it is also a dependence.
>
> Can you help me understand why it is better to make this driver a platform driver?
> Thank you very much!
>
arch_initcall(customize_machine)
-->of_platform_populate
-->of_platform_bus_create
-->of_amba_device_create
-->amba_device_add
-->amba_get_enable_pclk
The call sequence above shows that the clock of the amba device must be registered before
amba_device_add. The clock of "arm,pl011" uart is registered in the probe function of the
platform driver "hi3519-crg". So the platform device "hi3519-crg" must be created before
the amba device "arm,pl011" uart.

If this is not a problem, I'll change this to a platform driver in next version.

Thank you.

Regardsï
Jiancheng

>> Regards,
>> Mike
>>
>>>
>>>>> + depends on ARCH_HISI
>>>>> + default y
>>>>> + help
>>>>> + Build the clock driver for hi3519.
>>>>> +
>>>>> config COMMON_CLK_HI6220
>>>>> bool "Hi6220 Clock Driver"
>>>>> depends on ARCH_HISI || COMPILE_TEST
>>>>> diff --git a/drivers/clk/hisilicon/clk-hi3519.c b/drivers/clk/hisilicon/clk-hi3519.c
>>>>> new file mode 100644
>>>>> index 0000000..72d3a7b0
>>>>> --- /dev/null
>>>>> +++ b/drivers/clk/hisilicon/clk-hi3519.c
>>>>> @@ -0,0 +1,105 @@
>>>>> +
>>>>> +#define HI3519_FIXED_24M (HI3519_EXT_CLKS + 1)
>>>>> +#define HI3519_FIXED_50M (HI3519_EXT_CLKS + 2)
>>>>> +#define HI3519_FIXED_75M (HI3519_EXT_CLKS + 3)
>>>>> +#define HI3519_FIXED_125M (HI3519_EXT_CLKS + 4)
>>>>> +#define HI3519_FIXED_150M (HI3519_EXT_CLKS + 5)
>>>>> +#define HI3519_FIXED_200M (HI3519_EXT_CLKS + 6)
>>>>> +#define HI3519_FIXED_250M (HI3519_EXT_CLKS + 7)
>>>>> +#define HI3519_FIXED_300M (HI3519_EXT_CLKS + 8)
>>>>> +#define HI3519_FIXED_400M (HI3519_EXT_CLKS + 9)
>>>>> +#define HI3519_FMC_MUX (HI3519_EXT_CLKS + 10)
>>>>> +
>>>>> +#define HI3519_NR_CLKS 128
>>>>
>>>> Is this the same clock provider as the external clocks? I don't
>>>> understand why we're offsetting the clock numbering if we have
>>>> different providers. And if these are truly fixed clocks (except
>>>> for the mux) perhaps they're not even provided by this hardware
>>>> block, and are clocks that come from the board? If that's true
>>>> then I would expect them to be described in DT as fixed rate
>>>> clocks.
>>>>
>>> External clocks mentioned here are used directly as work clocks of other modules.
>>> Clocks defined in this file (internal clocks) are used as parents of external
>>> clocks. Internal clocks won't be referred by dts files and are just used in this driver.
>>> So they are moved here from the header file.
>>>
>>> External clocks and internal clocks are all generated by this CRG block. The input clock
>>> of the CRG block is always connected to a crystal oscillator on the board. So only one
>>> clock provider is defined here.
>>>
>>> Some clocks generated by CRG won't change their rate during the system running. These clocks
>>> are treated as fixed clocks here.
>>>
>>>>> +
>>>>> +static struct hisi_fixed_rate_clock hi3519_fixed_rate_clks[] __initdata = {
>>>>> + { HI3519_FIXED_3M, "3m", NULL, CLK_IS_ROOT, 3000000, },
>>>>> + { HI3519_FIXED_24M, "24m", NULL, CLK_IS_ROOT, 24000000, },
>>>>> + { HI3519_FIXED_50M, "50m", NULL, CLK_IS_ROOT, 50000000, },
>>>>> + { HI3519_FIXED_75M, "75m", NULL, CLK_IS_ROOT, 75000000, },
>>>>> + { HI3519_FIXED_125M, "125m", NULL, CLK_IS_ROOT, 125000000, },
>>>>> + { HI3519_FIXED_150M, "150m", NULL, CLK_IS_ROOT, 150000000, },
>>>>> + { HI3519_FIXED_200M, "200m", NULL, CLK_IS_ROOT, 200000000, },
>>>>> + { HI3519_FIXED_250M, "250m", NULL, CLK_IS_ROOT, 250000000, },
>>>>> + { HI3519_FIXED_300M, "300m", NULL, CLK_IS_ROOT, 300000000, },
>>>>> + { HI3519_FIXED_400M, "400m", NULL, CLK_IS_ROOT, 400000000, },
>>>>> +};
>>>>> +
>>>>> +static const char *fmc_mux_p[] __initconst = {
>>>>
>>>> const char * const ?
>>>>
>>>
>>> OK.
>>>
>>>>> + "24m", "75m", "125m", "150m", "200m", "250m", "300m", "400m", };
>>>>> +static u32 fmc_mux_table[] = {0, 1, 2, 3, 4, 5, 6, 7};
>>>>> +
>>>>> +static struct hisi_mux_clock hi3519_mux_clks[] __initdata = {
>>>>> + { HI3519_FMC_MUX, "fmc_mux", fmc_mux_p, ARRAY_SIZE(fmc_mux_p),
>>>>> + CLK_SET_RATE_PARENT, 0xc0, 2, 3, 0, fmc_mux_table, },
>>>>> +};
>>>>> +
>>>>> +static struct hisi_gate_clock hi3519_gate_clks[] __initdata = {
>>>>
>>>> We should look into making these things const.
>>>>
>>> OK. I'll add this in next version.
>>>
>>>>> + /* fmc */
>>>>> + { HI3519_FMC_CLK, "clk_fmc", "fmc_mux",
>>>>> + CLK_SET_RATE_PARENT, 0xc0, 1, 0, },
>>>>> + /* uart */
>>>>> + { HI3519_UART0_CLK, "clk_uart0", "24m",
>>>>> + CLK_SET_RATE_PARENT, 0xe4, 20, 0, },
>>>>> + { HI3519_UART1_CLK, "clk_uart1", "24m",
>>>>> + CLK_SET_RATE_PARENT, 0xe4, 21, 0, },
>>>>> + { HI3519_UART2_CLK, "clk_uart2", "24m",
>>>>> + CLK_SET_RATE_PARENT, 0xe4, 22, 0, },
>>>>> + { HI3519_UART3_CLK, "clk_uart3", "24m",
>>>>> + CLK_SET_RATE_PARENT, 0xe4, 23, 0, },
>>>>> + { HI3519_UART4_CLK, "clk_uart4", "24m",
>>>>> + CLK_SET_RATE_PARENT, 0xe4, 24, 0, },
>>>>> + { HI3519_SPI0_CLK, "clk_spi0", "50m",
>>>>> + CLK_SET_RATE_PARENT, 0xe4, 16, 0, },
>>>>> + { HI3519_SPI1_CLK, "clk_spi1", "50m",
>>>>> + CLK_SET_RATE_PARENT, 0xe4, 17, 0, },
>>>>> + { HI3519_SPI2_CLK, "clk_spi2", "50m",
>>>>> + CLK_SET_RATE_PARENT, 0xe4, 18, 0, },
>>>>> +};
>>>>> +
>>>>> +static void __init hi3519_clk_init(struct device_node *np)
>>>>> +{
>>>>> + struct hisi_clock_data *clk_data;
>>>>> +
>>>>> +
>>>>> + clk_data = hisi_clk_init(np, HI3519_NR_CLKS);
>>>>> + if (!clk_data)
>>>>> + return;
>>>>> +
>>>>> + hisi_clk_register_fixed_rate(hi3519_fixed_rate_clks,
>>>>> + ARRAY_SIZE(hi3519_fixed_rate_clks),
>>>>> + clk_data);
>>>>> + hisi_clk_register_mux(hi3519_mux_clks, ARRAY_SIZE(hi3519_mux_clks),
>>>>> + clk_data);
>>>>> + hisi_clk_register_gate(hi3519_gate_clks,
>>>>> + ARRAY_SIZE(hi3519_gate_clks), clk_data);
>>>>> +
>>>>> + hisi_reset_init(np);
>>>>> +}
>>>>> +
>>>>> +CLK_OF_DECLARE(hi3519_clk, "hisilicon,hi3519-crg", hi3519_clk_init);
>>>>> diff --git a/drivers/clk/hisilicon/reset.h b/drivers/clk/hisilicon/reset.h
>>>>> new file mode 100644
>>>>> index 0000000..37856089
>>>>> --- /dev/null
>>>>> +++ b/drivers/clk/hisilicon/reset.h
>>>>> @@ -0,0 +1,32 @@
>>>>> +/*
>>>>> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
>>>>> + *
>>>>> + * This program is free software; you can redistribute it and/or modify
>>>>> + * it under the terms of the GNU General Public License as published by
>>>>> + * the Free Software Foundation; either version 2 of the License, or
>>>>> + * (at your option) any later version.
>>>>> + *
>>>>> + * This program is distributed in the hope that it will be useful,
>>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>>>> + * GNU General Public License for more details.
>>>>> + *
>>>>> + * You should have received a copy of the GNU General Public License
>>>>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>>>>> + */
>>>>> +
>>>>> +#ifndef __HISI_RESET_H
>>>>> +#define __HISI_RESET_H
>>>>> +
>>>>> +#include <linux/of.h>
>>>>
>>>> Drop this include and forward declare struct device_node instead.
>>>>
>>>
>>> OK.
>>>
>>>>> +
>>>>> +#ifdef CONFIG_RESET_CONTROLLER
>>>>> +int __init hisi_reset_init(struct device_node *np);
>>>>
>>>> We don't need __init in header files.
>>>>
>>> OK. I'll remove it. Thank you.
>>>
>>> Jiancheng
>>> .
>>>
>>
>> .
>>
>
>
> .
>

Next message: Luca Abeni: "Re: [RFC 5/8] Track the "total rq utilisation" too"
Previous message: Li Yang: "[PATCH v3] i2c: imx: make bus recovery through pinctrl optional"
In reply to: xuejiancheng: "Re: [PATCH v5 1/6] clk: hisilicon: add CRG driver for hi3519 soc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]