Re: [PATCH V3 00/21] MMCONFIG refactoring and support for ARM64 PCI hostbridge init based on ACPI

From: Hanjun Guo
Date: Fri Jan 15 2016 - 06:01:12 EST

Next message: Mark Rutland: "Re: [Gta04-owner] [PATCH 0/4] UART slave device support - version 4"
Previous message: Takashi Iwai: "Re: sound: use-after-free in snd_timer_interrupt"
In reply to: Jeremy Linton: "Re: [PATCH V3 00/21] MMCONFIG refactoring and support for ARM64 PCI hostbridge init based on ACPI"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2016/1/13 21:20, Tomasz Nowicki wrote:

From the functionality point of view this series might be split into the
following logic parts:
1. Make MMCONFIG code arch-agnostic which allows all architectures to collect
PCI config regions and used when necessary.
2. Move non-arch specific bits to the core code.
3. Use MMCONFIG code and implement generic ACPI based PCI host controller driver.
4. Enable above driver on ARM64

Patches has been built on top of 4.4 and can be found here:
git@xxxxxxxxxx:semihalf-nowicki-tomasz/linux.git (pci-acpi-v3)

NOTE, this patch set depends on Matthew's patches:
http://www.spinics.net/lists/linux-pci/msg45950.html
https://github.com/Vality/linux/tree/pci-fixes

This has been tested on Cavium ThunderX server and QEMU.
Any help in reviewing and testing is very appreciated.

v2 -> v3
- fix legacy IRQ assigning and IO ports registration
- remove reference to arch specific companion device for ia64
- move ACPI PCI host controller driver to pci_root.c
- drop generic domain assignment for x86 and ia64 as I am not
able to run all necessary test variants
- drop patch which cleaned legacy IRQ assignment since it belongs to
Mathew's series:
https://patchwork.ozlabs.org/patch/557504/
- extend MCFG quirk code
- rebased to 4.4

Tested this patch set (and Matthew's) on a HP RX2660 IA64 machine,
with the CONFIG_ACPI_PCI_HOST_GENERIC disabled on IA64 ( it's a minor
comment needs to be addressed in my previous email), it can boot
the system ok with NIC working properly, with the /pro/ioports [1] and
the boot log [2] if anyone needs refer to it.

For this patch set, on IA64 machine,

Tested-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>

Thanks
Hanjun

[1]
node11:~ # cat /proc/ioports
000003c0-000003df : vga+
01000000-0100ffff : PCI Bus 0000:00
01001000-010010ff : 0000:00:03.0
02000000-0200ffff : PCI Bus 0000:01
02001000-020010ff : 0000:01:01.0
03000000-0300ffff : PCI Bus 0000:02
03001000-0300103f : 0000:02:01.1
03001040-0300107f : 0000:02:01.0
04000000-0400ffff : PCI Bus 0000:03
04001000-040010ff : 0000:03:01.1
04001100-040011ff : 0000:03:01.0
05000000-0500ffff : PCI Bus 0000:04
05001000-0500103f : 0000:04:01.1
05001040-0500107f : 0000:04:01.0

[2] boot log
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0.1-0.7-default (root@node11) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #60 SMP Fri Jan 15 17:19:02 EST 2016
EFI v2.00 by HP:
efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fde6000 SMBIOS=0x3ee7c000 HCDP=0x3fde4000
booting generic kernel on platform hpzx1
PCDP: v3 at 0x3fde4000
PCDP: VGA console
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003FDE6000 000028 (v02 HP )
ACPI: XSDT 0x000000003FDE602C 0000BC (v01 HP rx2660 00000000 HP 00000000)
ACPI: FACP 0x000000003FDF7268 0000F4 (v03 HP rx2660 00000000 HP 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 32/16 (20150930/tbfadt-623)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 32/16 (20150930/tbfadt-623)
ACPI: DSDT 0x000000003FDE61C8 00E566 (v01 HP rx2660 00000007 INTL 20050309)
ACPI: FACS 0x000000003FDF7360 000040
ACPI: SPCR 0x000000003FDF73A0 000050 (v01 HP 00000000 HP 00000000)
ACPI: DBGP 0x000000003FDF73F0 000034 (v01 HP rx2660 00000000 HP 00000000)
ACPI: APIC 0x000000003FDF7810 0000E8 (v01 HP rx2660 00000000 HP 00000000)
ACPI: SPMI 0x000000003FDF7428 000050 (v04 HP rx2660 00000000 HP 00000000)
ACPI: CPEP 0x000000003FDF76E0 000034 (v01 HP rx2660 00000000 HP 00000000)
ACPI: SSDT 0x000000003FDF4738 0004B3 (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF4BF8 000456 (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF5058 000866 (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF58C8 000866 (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF6138 000866 (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF69A8 000138 (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF6AE8 0000E0 (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF6BD8 00013C (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF6D18 0000E0 (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF6E08 00013C (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF6F48 0000E0 (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF7038 00013C (v01 HP rx2660 00000006 INTL 20050309)
ACPI: SSDT 0x000000003FDF7178 0000E0 (v01 HP rx2660 00000006 INTL 20050309)
ACPI: Local APIC address c0000000fee00000
4 CPUs available, 8 CPUs total
SMP: Allowing 8 CPUs, 4 hotplug CPUs
Reserving 512MB of memory at 128MB for crashkernel (System RAM: 16347MB)
Initial ramdisk at: 0xe0000100fe2af000 (13610859 bytes)
SAL 3.20: HP version 4.11
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
MCA related initialization done
Virtual mem_map starts at 0xa07fffffc7c80000
Zone ranges:
DMA [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000100ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000001000000-0x000000003e67ffff]
node 0: [mem 0x000000003eaf0000-0x000000003ee6ffff]
node 0: [mem 0x000000003fc00000-0x000000003fd6ffff]
node 0: [mem 0x0000000100000000-0x00000003ffffffff]
node 0: [mem 0x0000010040000000-0x00000100ff1effff]
node 0: [mem 0x00000100ff200000-0x00000100ffffffff]
Initmem setup node 0 [mem 0x0000000001000000-0x00000100ffffffff]
On node 0 totalpages: 261558
free_area_init_node: node 0, pgdat e000000001a00000, node_mem_map a07fffffc7c83800
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 15799 pages, LIFO batch:1
Normal zone: 14336 pages used for memmap
Normal zone: 245759 pages, LIFO batch:1
pcpu-alloc: s33560 r8192 d220392 u262144 alloc=4*65536
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 247166
Policy zone: Normal
Kernel command line: BOOT_IMAGE=dev000:\efi\SuSE\vmlinuz-4.4.0.1-0.7-default root=/dev/disk/by-id/scsi-35000cca00a9965f4-part2 splash=silent crashkernel=1024M-:512M
PID hash table entries: 4096 (order: -1, 32768 bytes)
Sorting __ex_table...
Memory: 16146944K/16739712K available (10928K kernel code, 5820K rwdata, 1828K rodata, 1280K init, 8346K bss, 592768K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:1024
ACPI: Local APIC address c0000000fee00000
GSI 25 (level, low) -> CPU 0 (0x0000) vector 49
CPU 0: base freq=266.116MHz, ITC ratio=6/4, ITC freq=399.174MHz+/-150ppm
clocksource: itc: mask: 0xffffffffffffffff max_cycles: 0x5c0fd820f3, max_idle_ns: 440795212316 ns
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop... 2834.43 BogoMIPS (lpj=5668864)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 14 ACPI AML tables successfully acquired and loaded
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 2, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff -6 cycles, maxerr 172 cycles)
CPU 1: base freq=266.116MHz, ITC ratio=6/4, ITC freq=399.174MHz+/-150ppm
CPU 2: synchronized ITC with CPU 0 (last diff -6 cycles, maxerr 173 cycles)
CPU 2: base freq=266.116MHz, ITC ratio=6/4, ITC freq=399.174MHz+/-150ppm
CPU 3: synchronized ITC with CPU 0 (last diff -6 cycles, maxerr 173 cycles)
CPU 3: base freq=266.116MHz, ITC ratio=6/4, ITC freq=399.174MHz+/-150ppm
Brought up 4 CPUs
Total of 4 processors activated (11337.72 BogoMIPS).
devtmpfs: initialized
SMBIOS 2.4 present.
DMI: hp server rx2660 , BIOS 04.11 10/20/2008
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
NET: Registered protocol family 16
ACPI: bus type PCI registered
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
\_SB_:_OSC invalid UUID
_OSC request data:1 e
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [L000] (domain 0000 [bus 00])
acpi HWP0002:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi HWP0002:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
debug: resource flag 0x200201, name PCI Bus 0000:00 with resouce [0xff5e2000 - 0xff5e2007]
debug: resource flag 0x200105, name PCI Bus 0000:00 with resouce [0x1000000 - 0x100ffff]debug: resource flag 0x200201, name PCI Bus 0000:00 with resouce [0xa0000 - 0xfffff]
debug: resource flag 0x200201, name PCI Bus 0000:00 with resouce [0x80000000 - 0x8fffffff]debug: resource flag 0x200201, name PCI Bus 0000:00 with resouce [0x80004000000 - 0x800ffffffff]
acpi HWP0002:00: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x1000000-0x100ffff window] (bus address [0x0000-0xffff])
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window]
pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window]
pci_bus 0000:00: root bus resource [bus 00]
pci 0000:00:01.0: [103c:1303] type 00 class 0xff0000
pci 0000:00:01.1: [103c:1302] type 00 class 0x078000
pci 0000:00:01.1: reg 0x14: [mem 0x88034000-0x88034fff 64bit]
pci 0000:00:01.1: reg 0x1c: [mem 0x80080000000-0x8008001ffff 64bit pref]
pci 0000:00:01.2: [103c:1048] type 00 class 0x070002
pci 0000:00:01.2: reg 0x14: [mem 0x88033000-0x88033fff 64bit]
pci 0000:00:02.0: [1033:0035] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0x88032000-0x88032fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:02.1: [1033:0035] type 00 class 0x0c0310
pci 0000:00:02.1: reg 0x10: [mem 0x88031000-0x88031fff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:02.2: [1033:00e0] type 00 class 0x0c0320
pci 0000:00:02.2: reg 0x10: [mem 0x88030000-0x880300ff]
pci 0000:00:02.2: supports D1 D2
pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:03.0: [1002:515e] type 00 class 0x030000
pci 0000:00:03.0: reg 0x10: [mem 0x80000000-0x87ffffff pref]
pci 0000:00:03.0: reg 0x14: [io 0x1001000-0x10010ff]
pci 0000:00:03.0: reg 0x18: [mem 0x88020000-0x8802ffff]
pci 0000:00:03.0: reg 0x30: [mem 0x88000000-0x8801ffff pref]
pci 0000:00:03.0: supports D1 D2
ACPI: PCI Root Bridge [L002] (domain 0000 [bus 01])
acpi HWP0002:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi HWP0002:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
debug: resource flag 0x200105, name PCI Bus 0000:01 with resouce [0x2000000 - 0x200ffff]
debug: resource flag 0x200201, name PCI Bus 0000:01 with resouce [0xa0000000 - 0xafffffff]debug: resource flag 0x200201, name PCI Bus 0000:01 with resouce [0x80204000000 - 0x802ffffffff]
acpi HWP0002:01: PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [io 0x2000000-0x200ffff window] (bus address [0x0000-0xffff])
pci_bus 0000:01: root bus resource [mem 0xa0000000-0xafffffff window]
pci_bus 0000:01: root bus resource [mem 0x80204000000-0x802ffffffff window]
pci_bus 0000:01: root bus resource [bus 01]
pci 0000:01:01.0: [1000:0054] type 00 class 0x010000
pci 0000:01:01.0: reg 0x10: [io 0x2001000-0x20010ff]
pci 0000:01:01.0: reg 0x14: [mem 0xa0470000-0xa0473fff 64bit]
pci 0000:01:01.0: reg 0x1c: [mem 0xa0460000-0xa046ffff 64bit]
pci 0000:01:01.0: reg 0x30: [mem 0xa0000000-0xa03fffff pref]
pci 0000:01:01.0: supports D1 D2
pci 0000:01:02.0: [14e4:1648] type 00 class 0x020000
pci 0000:01:02.0: reg 0x10: [mem 0xa0450000-0xa045ffff 64bit]
pci 0000:01:02.0: reg 0x30: [mem 0xa0420000-0xa043ffff pref]
pci 0000:01:02.0: PME# supported from D3hot D3cold
pci 0000:01:02.1: [14e4:1648] type 00 class 0x020000
pci 0000:01:02.1: reg 0x10: [mem 0xa0440000-0xa044ffff 64bit]
pci 0000:01:02.1: reg 0x30: [mem 0xa0400000-0xa041ffff pref]
pci 0000:01:02.1: PME# supported from D3hot D3cold
ACPI: PCI Root Bridge [L003] (domain 0000 [bus 02])
acpi HWP0002:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi HWP0002:02: _OSC failed (AE_NOT_FOUND); disabling ASPM
debug: resource flag 0x200105, name PCI Bus 0000:02 with resouce [0x3000000 - 0x300ffff]
debug: resource flag 0x200201, name PCI Bus 0000:02 with resouce [0xb0000000 - 0xbfffffff]debug: resource flag 0x200201, name PCI Bus 0000:02 with resouce [0x80304000000 - 0x803ffffffff]
acpi HWP0002:02: PCI host bridge to bus 0000:02
pci_bus 0000:02: root bus resource [io 0x3000000-0x300ffff window] (bus address [0x0000-0xffff])
pci_bus 0000:02: root bus resource [mem 0xb0000000-0xbfffffff window]
pci_bus 0000:02: root bus resource [mem 0x80304000000-0x803ffffffff window]
pci_bus 0000:02: root bus resource [bus 02]
pci 0000:02:01.0: [8086:1079] type 00 class 0x020000
pci 0000:02:01.0: reg 0x10: [mem 0xb0120000-0xb013ffff 64bit]
pci 0000:02:01.0: reg 0x18: [mem 0xb00c0000-0xb00fffff 64bit]
pci 0000:02:01.0: reg 0x20: [io 0x3001040-0x300107f]
pci 0000:02:01.0: reg 0x30: [mem 0xb0080000-0xb00bffff pref]
pci 0000:02:01.0: PME# supported from D0 D3hot
pci 0000:02:01.1: [8086:1079] type 00 class 0x020000
pci 0000:02:01.1: reg 0x10: [mem 0xb0100000-0xb011ffff 64bit]
pci 0000:02:01.1: reg 0x18: [mem 0xb0040000-0xb007ffff 64bit]
pci 0000:02:01.1: reg 0x20: [io 0x3001000-0x300103f]
pci 0000:02:01.1: reg 0x30: [mem 0xb0000000-0xb003ffff pref]
pci 0000:02:01.1: PME# supported from D0 D3hot
ACPI: PCI Root Bridge [L006] (domain 0000 [bus 03])
acpi HWP0002:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi HWP0002:03: _OSC failed (AE_NOT_FOUND); disabling ASPM
debug: resource flag 0x200105, name PCI Bus 0000:03 with resouce [0x4000000 - 0x400ffff]
debug: resource flag 0x200201, name PCI Bus 0000:03 with resouce [0xe0000000 - 0xefffffff]debug: resource flag 0x200201, name PCI Bus 0000:03 with resouce [0x80604000000 - 0x806ffffffff]
acpi HWP0002:03: PCI host bridge to bus 0000:03
pci_bus 0000:03: root bus resource [io 0x4000000-0x400ffff window] (bus address [0x0000-0xffff])
pci_bus 0000:03: root bus resource [mem 0xe0000000-0xefffffff window]
pci_bus 0000:03: root bus resource [mem 0x80604000000-0x806ffffffff window]
pci_bus 0000:03: root bus resource [bus 03]
pci 0000:03:01.0: [1000:0030] type 00 class 0x010000
pci 0000:03:01.0: reg 0x10: [io 0x4001100-0x40011ff]
pci 0000:03:01.0: reg 0x14: [mem 0xe0260000-0xe027ffff 64bit]
pci 0000:03:01.0: reg 0x1c: [mem 0xe0240000-0xe025ffff 64bit]
pci 0000:03:01.0: reg 0x30: [mem 0xe0100000-0xe01fffff pref]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.1: [1000:0030] type 00 class 0x010000
pci 0000:03:01.1: reg 0x10: [io 0x4001000-0x40010ff]
pci 0000:03:01.1: reg 0x14: [mem 0xe0220000-0xe023ffff 64bit]
pci 0000:03:01.1: reg 0x1c: [mem 0xe0200000-0xe021ffff 64bit]
pci 0000:03:01.1: reg 0x30: [mem 0xe0000000-0xe00fffff pref]
pci 0000:03:01.1: supports D1 D2
ACPI: PCI Root Bridge [L007] (domain 0000 [bus 04])
acpi HWP0002:04: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi HWP0002:04: _OSC failed (AE_NOT_FOUND); disabling ASPM
debug: resource flag 0x200105, name PCI Bus 0000:04 with resouce [0x5000000 - 0x500ffff]
debug: resource flag 0x200201, name PCI Bus 0000:04 with resouce [0xf0000000 - 0xfdffffff]debug: resource flag 0x200201, name PCI Bus 0000:04 with resouce [0x80704000000 - 0x807ffffffff]
acpi HWP0002:04: PCI host bridge to bus 0000:04
pci_bus 0000:04: root bus resource [io 0x5000000-0x500ffff window] (bus address [0x0000-0xffff])
pci_bus 0000:04: root bus resource [mem 0xf0000000-0xfdffffff window]
pci_bus 0000:04: root bus resource [mem 0x80704000000-0x807ffffffff window]
pci_bus 0000:04: root bus resource [bus 04]
pci 0000:04:01.0: [8086:1079] type 00 class 0x020000
pci 0000:04:01.0: reg 0x10: [mem 0xf0120000-0xf013ffff 64bit]
pci 0000:04:01.0: reg 0x18: [mem 0xf00c0000-0xf00fffff 64bit]
pci 0000:04:01.0: reg 0x20: [io 0x5001040-0x500107f]
pci 0000:04:01.0: reg 0x30: [mem 0xf0080000-0xf00bffff pref]
pci 0000:04:01.0: PME# supported from D0 D3hot
pci 0000:04:01.1: [8086:1079] type 00 class 0x020000
pci 0000:04:01.1: reg 0x10: [mem 0xf0100000-0xf011ffff 64bit]
pci 0000:04:01.1: reg 0x18: [mem 0xf0040000-0xf007ffff 64bit]
pci 0000:04:01.1: reg 0x20: [io 0x5001000-0x500103f]
pci 0000:04:01.1: reg 0x30: [mem 0xf0000000-0xf003ffff pref]
pci 0000:04:01.1: PME# supported from D0 D3hot
ACPI: Enabled 2 GPEs in block 10 to 1F
vgaarb: setting as boot device: PCI:0000:00:03.0
vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:03.0
IOC: zx2 2.0 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource itc
pnp: PnP ACPI init
GSI 24 (level, low) -> CPU 1 (0x0200) vector 50
pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 1 devices
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 4, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 2, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes)
NET: Registered protocol family 1
GSI 17 (level, low) -> CPU 2 (0x0400) vector 51
GSI 17 (level, low) -> CPU 2 (0x0400) vector 51 unregistered
GSI 18 (level, low) -> CPU 3 (0x0600) vector 51
GSI 18 (level, low) -> CPU 3 (0x0600) vector 51 unregistered
GSI 19 (level, low) -> CPU 0 (0x0000) vector 51
GSI 19 (level, low) -> CPU 0 (0x0000) vector 51 unregistered
pci 0000:00:03.0: Video device with shadowed ROM
PCI: CLS 128 bytes, default 128
Unpacking initramfs...
Freeing initrd memory: 13248kB freed
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
futex hash table entries: 2048 (order: 2, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1452897622.516:1): initialized
HugeTLB registered 256 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:00: ttyS0 at MMIO 0xff5e2000 (irq = 50, base_baud = 115200) is a 16550A
GSI 16 (level, low) -> CPU 1 (0x0200) vector 51
0000:00:01.2: ttyS1 at MMIO 0x88033000 (irq = 54, base_baud = 115200) is a 16550A
EFI Time Services Driver v0.4
libphy: Fixed MDIO Bus: probed
mousedev: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
registered taskstats version 1
Freeing unused kernel memory: 1280K (e000000004d80000 - e000000004ec0000)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (27 C)
SCSI subsystem initialized
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
GSI 49 (level, low) -> CPU 2 (0x0400) vector 52
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi host0: ioc0: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=55
GSI 50 (level, low) -> CPU 3 (0x0600) vector 53
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi host1: ioc1: LSI53C1030 C0, FwRev=01032346h, Ports=1, MaxQ=255, IRQ=56
random: nonblocking pool is initialized
Fusion MPT SAS Host driver 3.04.20
GSI 27 (level, low) -> CPU 0 (0x0000) vector 54
mptbase: ioc2: Initiating bringup
ioc2: LSISAS1068 B0: Capabilities={Initiator}
scsi host2: ioc2: LSISAS1068 B0, FwRev=01172a00h, Ports=1, MaxQ=163, IRQ=57
mptsas: ioc2: attaching ssp device: fw_channel 0, fw_id 8, phy 0, sas_addr 0x5000cca00a9965f5
scsi 2:0:0:0: Direct-Access HP DG0146FARVU HPD6 PQ: 0 ANSI: 5
mptsas: ioc2: attaching ssp device: fw_channel 0, fw_id 7, phy 1, sas_addr 0x5000cca00a99675d
scsi 2:0:1:0: Direct-Access HP DG0146FARVU HPD6 PQ: 0 ANSI: 5
udevd (181): /proc/181/oom_adj is deprecated, please use /proc/181/oom_score_adj instead.
udevd version 128 started
sd 2:0:0:0: [sda] 286749488 512-byte logical blocks: (146 GB/136 GiB)
sd 2:0:1:0: [sdb] 286749488 512-byte logical blocks: (146 GB/136 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: eb 00 10 08
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: eb 00 10 08
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2
sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:1:0: [sdb] Attached SCSI disk
EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
udevd version 128 started
ipmi message handler version 39.2
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
GSI 38 (level, low) -> CPU 1 (0x0200) vector 55
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
e1000 0000:02:01.0 eth0: (PCI-X:133MHz:64-bit) 00:24:81:77:73:a4
e1000 0000:02:01.0 eth0: Intel(R) PRO/1000 Network Connection
GSI 39 (level, low) -> CPU 2 (0x0400) vector 56
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [mem 0xff5bc000-0xff5bc003] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SPMI
ipmi_si: SPMI: mem 0xff5bc000 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at mem address 0xff5bc000, slave address 0x0, irq 0
e1000 0000:02:01.1 eth1: (PCI-X:133MHz:64-bit) 00:24:81:77:73:a5
e1000 0000:02:01.1 eth1: Intel(R) PRO/1000 Network Connection
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
Fusion MPT misc device (ioctl) driver 3.04.20
GSI 60 (level, low) -> CPU 3 (0x0600) vector 57
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:1:0: Attached scsi generic sg1 type 0
PTP clock support registered
ipmi_si IPI0001:00: Found new BMC (man_id: 0x00000b, prod_id: 0x8201, dev_id: 0x32)
ipmi_si IPI0001:00: IPMI kcs interface initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
tg3.c:v3.137 (May 11, 2014)
GSI 29 (level, low) -> CPU 0 (0x0000) vector 58
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
e1000 0000:04:01.0 eth2: (PCI-X:133MHz:64-bit) 00:24:81:77:75:70
e1000 0000:04:01.0 eth2: Intel(R) PRO/1000 Network Connection
GSI 61 (level, low) -> CPU 1 (0x0200) vector 59
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci: EHCI PCI platform driver
GSI 19 (level, low) -> CPU 2 (0x0400) vector 60
ehci-pci 0000:00:02.2: EHCI Host Controller
ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.2: irq 53, io mem 0x88030000
ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0.1-0.7-default ehci_hcd
usb usb1: SerialNumber: 0000:00:02.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci-pci: OHCI PCI platform driver
GSI 17 (level, low) -> CPU 3 (0x0600) vector 61
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:02.0: irq 51, io mem 0x88032000
e1000 0000:04:01.1 eth3: (PCI-X:133MHz:64-bit) 00:24:81:77:75:71
e1000 0000:04:01.1 eth3: Intel(R) PRO/1000 Network Connection
e1000 0000:02:01.0 eth0_rename: renamed from eth0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.4.0.1-0.7-default ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
GSI 18 (level, low) -> CPU 0 (0x0000) vector 62
ohci-pci 0000:00:02.1: OHCI PCI host controller
ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:02.1: irq 52, io mem 0x88031000
e1000 0000:02:01.1 eth1_rename: renamed from eth1
e1000 0000:04:01.1 eth5: renamed from eth3
e1000 0000:04:01.0 eth4: renamed from eth2
tg3 0000:01:02.0 eth0: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:22:64:94:09:3f
tg3 0000:01:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:01:02.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
e1000 0000:02:01.1 eth3: renamed from eth1_rename
GSI 30 (level, low) -> CPU 1 (0x0200) vector 63
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.4.0.1-0.7-default ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
e1000 0000:02:01.0 eth2: renamed from eth0_rename
tg3 0000:01:02.1 eth1: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:22:64:94:09:3e
tg3 0000:01:02.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:02.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:01:02.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
usb 1-2: new high-speed USB device number 3 using ehci-pci
usb 2-1: new full-speed USB device number 2 using ohci-pci
Adding 2104448k swap on /dev/sdb2. Priority:-1 extents:1 across:2104448k
usb 1-2: New USB device found, idVendor=03f0, idProduct=0126
usb 1-2: New USB device strings: Mfr=51, Product=80, SerialNumber=67
usb 1-2: Product: INTEGRITY SERVER
usb 1-2: Manufacturer: HEWLETT PACKARD
usb 1-2: SerialNumber: A60020000001
usb 2-1: New USB device found, idVendor=03f0, idProduct=1126
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=63
usb 2-1: Product: Virtual Management Device
usb 2-1: Manufacturer: HP
usb 2-1: SerialNumber: 0022649407fa
hidraw: raw HID events driver (C) Jiri Kosina
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host3: usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-2: new low-speed USB device number 2 using ohci-pci
input: HP Virtual Management Device as /devices/LNXSYSTM:00/LNXSYBUS:00/HWP0001:00/HWP0002:00/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:03F0:1126.0001/input/input2
hid-generic 0003:03F0:1126.0001: input,hidraw0: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:00:02.0-1/input0
input: HP Virtual Management Device as /devices/LNXSYSTM:00/LNXSYBUS:00/HWP0001:00/HWP0002:00/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/0003:03F0:1126.0002/input/input3
hid-generic 0003:03F0:1126.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:00:02.0-1/input1
usb 3-2: New USB device found, idVendor=0557, idProduct=2221
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: UC-10KM V1.3.121
usb 3-2: Manufacturer: ATEN
usb 3-2: SerialNumber: USB Composite device
input: ATEN UC-10KM V1.3.121 as /devices/LNXSYSTM:00/LNXSYBUS:00/HWP0001:00/HWP0002:00/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.0/0003:0557:2221.0003/input/input4
hid-generic 0003:0557:2221.0003: input,hidraw2: USB HID v1.10 Keyboard [ATEN UC-10KM V1.3.121] on usb-0000:00:02.1-2/input0
input: ATEN UC-10KM V1.3.121 as /devices/LNXSYSTM:00/LNXSYBUS:00/HWP0001:00/HWP0002:00/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.1/0003:0557:2221.0004/input/input5
hid-generic 0003:0557:2221.0004: input,hidraw3: USB HID v1.10 Mouse [ATEN UC-10KM V1.3.121] on usb-0000:00:02.1-2/input1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@xxxxxxxxxx
loop: module loaded
scsi 3:0:0:0: CD-ROM TEAC DVD-ROM DW-224EV K.DA PQ: 0 ANSI: 0
scsi 3:0:0:0: Attached scsi generic sg2 type 5
sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
fuse init (API version 7.23)
ip_local_port_range: prefer different parity for start/end values.
hangcheck_timer: disagrees about version of symbol module_layout
tg3 0000:01:02.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:01:02.0 eth0: Flow control is off for TX and off for RX
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:01:02.1 eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:01:02.1 eth1: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net a0000001014af100)
GSI 20 (level, low) -> CPU 2 (0x0400) vector 64
gnome-settings-(4170): floating-point assist fault at ip 2000000006b7bdc2, isr 0000020000001001
gnome-settings-(4170): floating-point assist fault at ip 2000000006b7bdc2, isr 0000020000001001
gnome-settings-(4170): floating-point assist fault at ip 2000000006b7bdc2, isr 0000020000001001
gnome-settings-(4170): floating-point assist fault at ip 2000000006b7bdc2, isr 0000020000001001
gnome-settings-(4170): floating-point assist fault at ip 2000000006b7bdc2, isr 0000020000001001
gdm-simple-gree(4179): unaligned access to 0x600fffffffadf34c, ip=0x20000000012216a0

Next message: Mark Rutland: "Re: [Gta04-owner] [PATCH 0/4] UART slave device support - version 4"
Previous message: Takashi Iwai: "Re: sound: use-after-free in snd_timer_interrupt"
In reply to: Jeremy Linton: "Re: [PATCH V3 00/21] MMCONFIG refactoring and support for ARM64 PCI hostbridge init based on ACPI"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]