[PATCH V2 0/5] Updates to AMD MCE driver per Scalable MCA spec

[Aravind Gopalakrishnan]

The patchset contains updates to the MCE driver based
on the Scalable MCA specification.

Patches 1-3 include some minor changes to existing code
and have been tested for regressions on older families.

Patches 4-5 is new code and only runs on processors
with ScalableMCA feature enabled (for future)

Patch 1: Order of mce_amd_feature_init() was incorrect as
	 it should be called after we gather features from
	 cpuid bits. Fixing that in this patch
Patch 2: We do not require shared bank verification on ZP.
	 Modifying code here to return early if we are on a processor
	 that supports SMCA feature.
Patch 3: The number of blocks per bank is reduced from Fam17h onwards.
	 Fixing code to reflect this architectural change
Patch 4: LVT offset for thresholding is now programmed in different MSR
	 as opposed to per-bank MISC register in earlier processors.
	 Fixing code here to obtain LVT offset from correct MSR.
Patch 5: OS is required to set MCAXEn bit in the per-bank CONFIG MSR
	 to acknowledge the use of new MSR range for MCA.
	 Doing that here and also creating definitions for the new
	 MSR range in msr-index.

Changes in V2 (per Boris)
  - Include only definitions on header file that we are using here
  - Add comments around macros that belong to SMCA

Aravind Gopalakrishnan (5):
  x86, mce: Fix order of AMD MCE init function call
  x86/mcheck/AMD: Do not perform shared bank check for future processors
  x86/mcheck/AMD: Reduce number of blocks scanned per bank
  x86/mcheck/AMD: Fix LVT offset configuration for thresholding
  x86/mcheck/AMD: Set MCAX Enable bit

 arch/x86/include/asm/msr-index.h     |  5 +++
 arch/x86/kernel/cpu/mcheck/mce.c     |  2 +-
 arch/x86/kernel/cpu/mcheck/mce_amd.c | 63 ++++++++++++++++++++++++++++++++++--
 3 files changed, 67 insertions(+), 3 deletions(-)

-- 
2.7.0