Re: [PATCH v2 26/31] sound/usb: Update ALSA driver to use Managed Media Controller API
From: Shuah Khan
Date: Fri Jan 15 2016 - 19:38:40 EST
On 01/15/2016 06:38 AM, Takashi Iwai wrote:
> On Thu, 14 Jan 2016 20:52:28 +0100,
> Shuah Khan wrote:
>>
>> Change ALSA driver to use Managed Media Managed Controller
>> API to share tuner with DVB and V4L2 drivers that control
>> AU0828 media device. Media device is created based on a
>> newly added field value in the struct snd_usb_audio_quirk.
>> Using this approach, the media controller API usage can be
>> added for a specific device. In this patch, Media Controller
>> API is enabled for AU0828 hw. snd_usb_create_quirk() will
>> check this new field, if set will create a media device using
>> media_device_get_devres() interface.
>>
>> media_device_get_devres() will allocate a new media device
>> devres or return an existing one, if it finds one.
>>
>> During probe, media usb driver could have created the media
>> device devres. It will then initialze (if necessary) and
>> register the media device if it isn't already initialized
>> and registered. Media device unregister is done from
>> usb_audio_disconnect().
>>
>> During probe, media usb driver could have created the
>> media device devres. It will then register the media
>> device if it isn't already registered. Media device
>> unregister is done from usb_audio_disconnect().
>>
>> New structure media_ctl is added to group the new
>> fields to support media entity and links. This new
>> structure is added to struct snd_usb_substream.
>>
>> A new entity_notify hook and a new ALSA capture media
>> entity are registered from snd_usb_pcm_open() after
>> setting up hardware information for the PCM device.
>>
>> When a new entity is registered, Media Controller API
>> interface media_device_register_entity() invokes all
>> registered entity_notify hooks for the media device.
>> ALSA entity_notify hook parses all the entity list to
>> find a link from decoder it ALSA entity. This indicates
>> that the bridge driver created a link from decoder to
>> ALSA capture entity.
>>
>> ALSA will attempt to enable the tuner to link the tuner
>> to the decoder calling enable_source handler if one is
>> provided by the bridge driver prior to starting Media
>> pipeline from snd_usb_hw_params(). If enable_source returns
>> with tuner busy condition, then snd_usb_hw_params() will fail
>> with -EBUSY. Media pipeline is stopped from snd_usb_hw_free().
>>
>> Signed-off-by: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
>> ---
>> Changes since v1: Addressed Takasi Iwai's comments on v1
>> - Move config defines to Kconfig and add logic
>> to Makefile to conditionally compile media.c
>> - Removed extra includes from media.c
>> - Added snd_usb_autosuspend() in error leg
>> - Removed debug related code that was missed in v1
>>
>> sound/usb/Kconfig | 7 ++
>> sound/usb/Makefile | 4 +
>> sound/usb/card.c | 7 ++
>> sound/usb/card.h | 1 +
>> sound/usb/media.c | 190 +++++++++++++++++++++++++++++++++++++++++++++++
>> sound/usb/media.h | 56 ++++++++++++++
>> sound/usb/pcm.c | 28 +++++--
>> sound/usb/quirks-table.h | 1 +
>> sound/usb/quirks.c | 5 ++
>> sound/usb/stream.c | 2 +
>> sound/usb/usbaudio.h | 1 +
>> 11 files changed, 297 insertions(+), 5 deletions(-)
>> create mode 100644 sound/usb/media.c
>> create mode 100644 sound/usb/media.h
>>
>> diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
>> index a452ad7..8d5cdab 100644
>> --- a/sound/usb/Kconfig
>> +++ b/sound/usb/Kconfig
>> @@ -15,6 +15,7 @@ config SND_USB_AUDIO
>> select SND_RAWMIDI
>> select SND_PCM
>> select BITREVERSE
>> + select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER && (MEDIA_SUPPORT || MEDIA_SUPPORT_MODULE)
>
> This looks wrong as a Kconfig syntax. "... if MEDIA_CONTROLLER"
> should work, I suppose?
The conditional select syntax is used in several Kconfig
files. You are right about (MEDIA_SUPPORT || MEDIA_SUPPORT_MODULE)
Adding checks for that is unnecessary.
>
> Above all, can MEDIA_CONTROLLER be tristate? It's currently a bool.
> If it's a tristate, it causes a problem wrt dependency. Imagine
> USB-audio is built-in while MC is a module.
I don't think MEDIA_CONTROLLER will evebr tristate. I have this
logic to the following and it works with and without MEDIA_CONTROLLER
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index a452ad7..8ccbb35 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -15,6 +15,7 @@ config SND_USB_AUDIO
select SND_RAWMIDI
select SND_PCM
select BITREVERSE
+ select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER
help
Say Y here to include support for USB audio and USB MIDI
devices.
@@ -22,6 +23,11 @@ config SND_USB_AUDIO
To compile this driver as a module, choose M here: the module
will be called snd-usb-audio.
+config SND_USB_AUDIO_USE_MEDIA_CONTROLLER
+ bool "USB Audio/MIDI driver with Media Controller Support"
+ depends on MEDIA_CONTROLLER
+ default y
+
>
>> help
>> Say Y here to include support for USB audio and USB MIDI
>> devices.
>> @@ -22,6 +23,12 @@ config SND_USB_AUDIO
>> To compile this driver as a module, choose M here: the module
>> will be called snd-usb-audio.
>>
>> +config SND_USB_AUDIO_USE_MEDIA_CONTROLLER
>> + bool "USB Audio/MIDI driver with Media Controller Support"
>> + depends on SND_USB_AUDIO && MEDIA_CONTROLLER
>> + depends on MEDIA_SUPPORT || MEDIA_SUPPORT_MODULE
See above. I got rid of depends on for SND_USB_AUDIO
>
> Hmm, it's superfluous to have both this depends and the reverse-select
> of the above. (And again MEDIA_SUPPORT_MODULE looks bogus.)
>
>> + default y
>> +
>> config SND_USB_UA101
>> tristate "Edirol UA-101/UA-1000 driver"
>> select SND_PCM
>> diff --git a/sound/usb/Makefile b/sound/usb/Makefile
>> index 2d2d122..3113c45 100644
>> --- a/sound/usb/Makefile
>> +++ b/sound/usb/Makefile
>> @@ -15,6 +15,10 @@ snd-usb-audio-objs := card.o \
>> quirks.o \
>> stream.o
>>
>> +ifeq ($(CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER),y)
>> + snd-usb-audio-objs += media.o
>> +endif
>
> A better form is like
>
> snd-usb-audio-$(CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER) += media.
Got it. Fixed it now.
>
>
>> +
>> snd-usbmidi-lib-objs := midi.o
>>
>> # Toplevel Module Dependency
>> diff --git a/sound/usb/card.c b/sound/usb/card.c
>> index 18f5664..1a63851 100644
>> --- a/sound/usb/card.c
>> +++ b/sound/usb/card.c
>> @@ -66,6 +66,7 @@
>> #include "format.h"
>> #include "power.h"
>> #include "stream.h"
>> +#include "media.h"
>>
>> MODULE_AUTHOR("Takashi Iwai <tiwai@xxxxxxx>");
>> MODULE_DESCRIPTION("USB Audio");
>> @@ -621,6 +622,12 @@ static void usb_audio_disconnect(struct usb_interface *intf)
>> list_for_each_entry(mixer, &chip->mixer_list, list) {
>> snd_usb_mixer_disconnect(mixer);
>> }
>> + /*
>> + * Nice to check quirk && quirk->media_device
>> + * need some special handlings. Doesn't look like
>> + * we have access to quirk here
>> + */
>> + media_device_delete(intf);
>> }
>>
>> chip->num_interfaces--;
>> diff --git a/sound/usb/card.h b/sound/usb/card.h
>> index 71778ca..c15a03c 100644
>> --- a/sound/usb/card.h
>> +++ b/sound/usb/card.h
>> @@ -156,6 +156,7 @@ struct snd_usb_substream {
>> } dsd_dop;
>>
>> bool trigger_tstamp_pending_update; /* trigger timestamp being updated from initial estimate */
>> + void *media_ctl;
>> };
>>
>> struct snd_usb_stream {
>> diff --git a/sound/usb/media.c b/sound/usb/media.c
>> new file mode 100644
>> index 0000000..644b6e8
>> --- /dev/null
>> +++ b/sound/usb/media.c
>> @@ -0,0 +1,190 @@
>> +/*
>> + * media.c - Media Controller specific ALSA driver code
>> + *
>> + * Copyright (c) 2015 Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
>> + * Copyright (c) 2015 Samsung Electronics Co., Ltd.
>> + *
>> + * This file is released under the GPLv2.
>> + */
>> +
>> +/*
>> + * This file adds Media Controller support to ALSA driver
>> + * to use the Media Controller API to share tuner with DVB
>> + * and V4L2 drivers that control media device. Media device
>> + * is created based on existing quirks framework. Using this
>> + * approach, the media controller API usage can be added for
>> + * a specific device.
>> +*/
>> +
>> +#include <linux/init.h>
>> +#include <linux/list.h>
>> +#include <linux/mutex.h>
>> +#include <linux/slab.h>
>> +#include <linux/usb.h>
>> +
>> +#include <sound/pcm.h>
>> +
>> +#include "usbaudio.h"
>> +#include "card.h"
>> +#include "media.h"
>> +
>> +int media_device_create(struct snd_usb_audio *chip,
>> + struct usb_interface *iface)
>> +{
>> + struct media_device *mdev;
>> + struct usb_device *usbdev = interface_to_usbdev(iface);
>> + int ret;
>> +
>> + mdev = media_device_get_devres(&usbdev->dev);
>> + if (!mdev)
>> + return -ENOMEM;
>> + if (!mdev->dev) {
>> + /* register media device */
>> + mdev->dev = &usbdev->dev;
>> + if (usbdev->product)
>> + strlcpy(mdev->model, usbdev->product,
>> + sizeof(mdev->model));
>> + if (usbdev->serial)
>> + strlcpy(mdev->serial, usbdev->serial,
>> + sizeof(mdev->serial));
>> + strcpy(mdev->bus_info, usbdev->devpath);
>> + mdev->hw_revision = le16_to_cpu(usbdev->descriptor.bcdDevice);
>> + ret = media_device_init(mdev);
>> + if (ret) {
>> + dev_err(&usbdev->dev,
>> + "Couldn't create a media device. Error: %d\n",
>> + ret);
>> + return ret;
>> + }
>> + }
>> + if (!media_devnode_is_registered(&mdev->devnode)) {
>> + ret = media_device_register(mdev);
>> + if (ret) {
>> + dev_err(&usbdev->dev,
>> + "Couldn't register media device. Error: %d\n",
>> + ret);
>> + return ret;
>> + }
>> + }
>> + return 0;
>> +}
>> +
>> +void media_device_delete(struct usb_interface *iface)
>> +{
>> + struct media_device *mdev;
>> + struct usb_device *usbdev = interface_to_usbdev(iface);
>> +
>> + mdev = media_device_find_devres(&usbdev->dev);
>> + if (mdev && media_devnode_is_registered(&mdev->devnode))
>> + media_device_unregister(mdev);
>> +}
>> +
>> +static int media_enable_source(struct media_ctl *mctl)
>> +{
>> + if (mctl && mctl->media_dev->enable_source)
>> + return mctl->media_dev->enable_source(&mctl->media_entity,
>> + &mctl->media_pipe);
>> + return 0;
>> +}
>> +
>> +static void media_disable_source(struct media_ctl *mctl)
>> +{
>> + if (mctl && mctl->media_dev->disable_source)
>> + mctl->media_dev->disable_source(&mctl->media_entity);
>> +}
>> +
>> +int media_stream_init(struct snd_usb_substream *subs, struct snd_pcm *pcm,
>> + int stream)
>> +{
>> + struct media_device *mdev;
>> + struct media_ctl *mctl;
>> + struct device *pcm_dev = &pcm->streams[stream].dev;
>> + u32 intf_type;
>> + int ret = 0;
>> +
>> + mdev = media_device_find_devres(&subs->dev->dev);
>> + if (!mdev)
>> + return -ENODEV;
>> +
>> + if (subs->media_ctl)
>> + return 0;
>> +
>> + /* allocate media_ctl */
>> + mctl = kzalloc(sizeof(*mctl), GFP_KERNEL);
>> + if (!mctl)
>> + return -ENOMEM;
>> +
>> + mctl->media_dev = mdev;
>> + if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
>> + intf_type = MEDIA_INTF_T_ALSA_PCM_PLAYBACK;
>> + mctl->media_entity.function = MEDIA_ENT_F_AUDIO_PLAYBACK;
>> + } else {
>> + intf_type = MEDIA_INTF_T_ALSA_PCM_CAPTURE;
>> + mctl->media_entity.function = MEDIA_ENT_F_AUDIO_CAPTURE;
>> + }
>> + mctl->media_entity.name = pcm->name;
>> + mctl->media_entity.info.dev.major = MAJOR(pcm_dev->devt);
>> + mctl->media_entity.info.dev.minor = MINOR(pcm_dev->devt);
>> + mctl->media_pad.flags = MEDIA_PAD_FL_SINK;
>> + media_entity_pads_init(&mctl->media_entity, 1, &mctl->media_pad);
>> + ret = media_device_register_entity(mctl->media_dev,
>> + &mctl->media_entity);
>> + if (ret) {
>> + kfree(mctl);
>> + return ret;
>> + }
>> + mctl->intf_devnode = media_devnode_create(mdev, intf_type, 0,
>> + MAJOR(pcm_dev->devt),
>> + MINOR(pcm_dev->devt));
>> + if (!mctl->intf_devnode) {
>> + media_device_unregister_entity(&mctl->media_entity);
>> + kfree(mctl);
>> + return -ENOMEM;
>> + }
>> + mctl->intf_link = media_create_intf_link(&mctl->media_entity,
>> + &mctl->intf_devnode->intf,
>> + MEDIA_LNK_FL_ENABLED);
>> + if (!mctl->intf_link) {
>> + media_devnode_remove(mctl->intf_devnode);
>> + media_device_unregister_entity(&mctl->media_entity);
>> + kfree(mctl);
>> + return -ENOMEM;
>> + }
>> + subs->media_ctl = (void *) mctl;
>
> The cast to a void pointer is superfluous.
Right. Fixed it and couple of others like this
one I found.
Will send v3 shortly.
thanks,
-- Shuah
--
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@xxxxxxxxxxxxxxx | (970) 217-8978