[PATCH 3.2 57/70] i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs
From: Ben Hutchings
Date: Sun Jan 17 2016 - 22:30:40 EST
3.2.76-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Seth Heasley <seth.heasley@xxxxxxxxx>
commit f39901c1befa556bc91902516a3e2e460000b4a8 upstream.
This patch adds the i801 SMBus Controller DeviceIDs for the Intel Coleto Creek PCH.
Signed-off-by: Seth Heasley <seth.heasley@xxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
Documentation/i2c/busses/i2c-i801 | 1 +
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-i801.c | 3 +++
3 files changed, 5 insertions(+)
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -24,6 +24,7 @@ Supported adapters:
* Intel Lynx Point-LP (PCH)
* Intel Avoton (SOC)
* Intel Wellsburg (PCH)
+ * Intel Coleto Creek (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -107,6 +107,7 @@ config I2C_I801
Lynx Point-LP (PCH)
Avoton (SOC)
Wellsburg (PCH)
+ Coleto Creek (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -58,6 +58,7 @@
Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
+ Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
Features supported by this driver:
Software PEC no
@@ -152,6 +153,7 @@
#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
@@ -654,6 +656,7 @@ static const struct pci_device_id i801_i
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
{ 0, }
};