Re: [PATCH v3 3/5] ARM: at91/dt: sama5d2: add adc device

[Nicolas Ferre]

Le 18/01/2016 08:59, Ludovic Desroches a écrit :
> On Sat, Jan 16, 2016 at 11:38:30AM +0000, Jonathan Cameron wrote:
>> On 14/01/16 15:38, Ludovic Desroches wrote:
>>> Add the ADC device, and remove the adc_op_clk which is useless since the
>>> adc sampling frequency is configured with sysfs.
>>>
>>> Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
>> I've now applied the driver to the togreg branch of iio.git.
>> Should get a pull request out to Greg in about 2 weeks time and it'll
>> probably be in linux-next a week after that.  I'm assuming all the device
>> tree changes will got through the at91 tree and arm-soc etc. 
>> Shout if you want me to take them through IIO.
>>
> 
> Ok, I think Nicolas would take this patch.

Sure, we'll take them through AT91 then arm-soc trees.

Thanks, bye.


>>> ---
>>>  arch/arm/boot/dts/sama5d2.dtsi | 18 ++++++++++++------
>>>  1 file changed, 12 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
>>> index 3f750f6..46dd430 100644
>>> --- a/arch/arm/boot/dts/sama5d2.dtsi
>>> +++ b/arch/arm/boot/dts/sama5d2.dtsi
>>> @@ -88,12 +88,6 @@
>>>  			#clock-cells = <0>;
>>>  			clock-frequency = <0>;
>>>  		};
>>> -
>>> -		adc_op_clk: adc_op_clk{
>>> -			compatible = "fixed-clock";
>>> -			#clock-cells = <0>;
>>> -			clock-frequency = <1000000>;
>>> -		};
>>>  	};
>>>  
>>>  	ns_sram: sram@00200000 {
>>> @@ -1085,6 +1079,18 @@
>>>  				status = "disabled";
>>>  			};
>>>  
>>> +			adc: adc@fc030000 {
>>> +				compatible = "atmel,sama5d2-adc";
>>> +				reg = <0xfc030000 0x100>;
>>> +				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
>>> +				clocks = <&adc_clk>;
>>> +				clock-names = "adc_clk";
>>> +				atmel,min-sample-rate-hz = <200000>;
>>> +				atmel,max-sample-rate-hz = <20000000>;
>>> +				atmel,startup-time-ms = <4>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>>  			pioA: pinctrl@fc038000 {
>>>  				compatible = "atmel,sama5d2-pinctrl";
>>>  				reg = <0xfc038000 0x600>;
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


-- 
Nicolas Ferre