[RFC PATCH 1/3] mmc: pwrseq_simple: add to_pwrseq_simple() macro
From: Srinivas Kandagatla
Date: Tue Jan 19 2016 - 05:59:14 EST
This patch adds to_pwrseq_simple() macro to make the code more readable.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
drivers/mmc/core/pwrseq_simple.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
index d10538b..c091f98 100644
--- a/drivers/mmc/core/pwrseq_simple.c
+++ b/drivers/mmc/core/pwrseq_simple.c
@@ -26,6 +26,8 @@ struct mmc_pwrseq_simple {
struct gpio_descs *reset_gpios;
};
+#define to_pwrseq_simple(p) container_of(p, struct mmc_pwrseq_simple, pwrseq)
+
static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
int value)
{
@@ -42,8 +44,7 @@ static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host)
{
- struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
- struct mmc_pwrseq_simple, pwrseq);
+ struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
if (!IS_ERR(pwrseq->ext_clk) && !pwrseq->clk_enabled) {
clk_prepare_enable(pwrseq->ext_clk);
@@ -55,16 +56,14 @@ static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host)
static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host)
{
- struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
- struct mmc_pwrseq_simple, pwrseq);
+ struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
mmc_pwrseq_simple_set_gpios_value(pwrseq, 0);
}
static void mmc_pwrseq_simple_power_off(struct mmc_host *host)
{
- struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
- struct mmc_pwrseq_simple, pwrseq);
+ struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
mmc_pwrseq_simple_set_gpios_value(pwrseq, 1);
@@ -76,8 +75,7 @@ static void mmc_pwrseq_simple_power_off(struct mmc_host *host)
static void mmc_pwrseq_simple_free(struct mmc_host *host)
{
- struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
- struct mmc_pwrseq_simple, pwrseq);
+ struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
gpiod_put_array(pwrseq->reset_gpios);
--
1.9.1