[PATCH 4/4] net: mvneta: update clocks property and document additional clock-names
From: Jisheng Zhang
Date: Wed Jan 20 2016 - 03:11:48 EST
Now that mvneta driver allows to have more than one clock defined,
update the clocks property and document the clock-names property.
Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index aeea50c..f85b93b 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -6,12 +6,16 @@ Required properties:
- interrupts: interrupt for the device
- phy: See ethernet.txt file in the same directory.
- phy-mode: See ethernet.txt file in the same directory
-- clocks: a pointer to the reference clock for this device.
+- clocks: Array of clocks required for this device; requires at least one
+ for CORE clock.
Optional properties:
- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
Value is presented in bytes. If not used, by default 1600B is set for
"marvell,armada-370-neta" and 9800B for others.
+- clock-names: Array of names corresponding to clocks property; shall be
+ "core" for CORE clock and "axi" for optional AXI clock.
+
Example:
--
2.7.0.rc3