-----Original Message-----
From: Yang Zhang [mailto:yang.zhang.wz@xxxxxxxxx]
Sent: Thursday, January 21, 2016 1:00 PM
To: Wu, Feng <feng.wu@xxxxxxxxx>; pbonzini@xxxxxxxxxx;
rkrcmar@xxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx; kvm@xxxxxxxxxxxxxxx
Subject: Re: [PATCH v3 1/4] KVM: Recover IRTE to remapped mode if the
interrupt is not single-destination
On 2016/1/21 12:42, Wu, Feng wrote:
On
-----Original Message-----
From: kvm-owner@xxxxxxxxxxxxxxx [mailto:kvm-owner@xxxxxxxxxxxxxxx]
theBehalf Of Yang Zhang
Sent: Thursday, January 21, 2016 11:35 AM
To: Wu, Feng <feng.wu@xxxxxxxxx>; pbonzini@xxxxxxxxxx;
rkrcmar@xxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx; kvm@xxxxxxxxxxxxxxx
Subject: Re: [PATCH v3 1/4] KVM: Recover IRTE to remapped mode if the
interrupt is not single-destination
On 2016/1/21 11:14, Wu, Feng wrote:
-----Original Message-----
From: Yang Zhang [mailto:yang.zhang.wz@xxxxxxxxx]
Sent: Thursday, January 21, 2016 11:06 AM
To: Wu, Feng <feng.wu@xxxxxxxxx>; pbonzini@xxxxxxxxxx;
rkrcmar@xxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx; kvm@xxxxxxxxxxxxxxx
Subject: Re: [PATCH v3 1/4] KVM: Recover IRTE to remapped mode if
__pa(vcpu_to_pi_desc(vcpu));interrupt is not single-destination
On 2016/1/20 9:42, Feng Wu wrote:
When the interrupt is not single destination any more, we need*kvm, unsigned int host_irq,
to change back IRTE to remapped mode explicitly.
Signed-off-by: Feng Wu <feng.wu@xxxxxxxxx>
---
arch/x86/kvm/vmx.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e2951b6..13d14d4 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -10764,8 +10764,17 @@ static int vmx_update_pi_irte(struct kvm
*/
kvm_set_msi_irq(e, &irq);
- if (!kvm_intr_is_single_vcpu(kvm, &irq, &vcpu))
+ if (!kvm_intr_is_single_vcpu(kvm, &irq, &vcpu)) {
+ /*
+ * Make sure the IRTE is in remapped mode if
+ * we don't handle it in posted mode.
+ */
+ pi_set_sn(vcpu_to_pi_desc(vcpu));
+ ret = irq_set_vcpu_affinity(host_irq, NULL);
+ pi_clear_sn(vcpu_to_pi_desc(vcpu));
+
continue;
+ }
vcpu_info.pi_desc_addr =
vcpu_info.vector = irq.vector;
I am still feel weird with this change: according the semantic of VT-d
posted interrupt, the interrupt will injected to guest through posted
notification and /proc/interrupts shows the same meaning. But now,
without being aware of user, the interrupt changes to legacy way and it
appears on different entry on /proc/interrupts. It looks weird.
I don't think it has problem here, IMO, this is exactly how it works.
There should be different entry for the interrupts in VT-d PI mode
and leagcy mode.
I am not saying any problem here. Just feel weird. From a normal user's
point, he has turned on the VT-d pi and according the semantic of VT-d
pi, he should not observe the interrupt through legacy mode, but now he
do see it. Maybe print out a message here will be helpful, like what you
did for disabled lapic found during irq injection.
Even VT-d PI is on, not all interrupts can be handled by it, the reason the
No, we can handle it but we don't do it due to the complexity.For
example, we can use wake up vector to delivery the interrupt which still
is in PI mode but doesn't require any mode change.
I mean, multi-cast and broadcast interrupts cannot be handled in PI mode.
interrupts is changed back to legacy mode is because the user changes
the affinity, and it cannot be handle in PI mode, and hence legacy mode
is used. It is the user's behavior that cause this mode change, seems it is
not so weird to me. But add some message here is good idea, just like
Why user's behavior can change the mode?
Like you mentioned before, if the interrupt is changed from single-destination
to multiple-destination by guest. And this is the reason of adding the rollback
logic here, right?
Thanks,
Feng
According the current design,
there is no way for user to turn on/off dynamically.Why we need to
rollback to legacy mode is we don't want to handle multi-destination
interrupt in PI mode but it doesn't mean we cannot do it like i said before.
--
best regards
yang