[PATCH] Platform: goldfish: goldfish_pipe.c: Add DMA support using managed version

[Shraddha Barke]

Function setup_access_params_addr is called only from probe function, hence
managed version dmam_alloc_coherent is used.

setup_access_params_addr has 2 goals-

-Initialize the access_params field so that it can be used to send and read
commands from the device in access_with_param
-Get a bus address for the allocated memory to transfer to the device.

Replace the combination of devm_kzalloc and _pa() with dmam_alloc_coherent.
Coherent mapping guarantees that the device and CPU are in sync.

Signed-off-by: Shraddha Barke <shraddha.6596@xxxxxxxxx>
---
 drivers/platform/goldfish/goldfish_pipe.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index e7a29e2..fb982ac 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -57,6 +57,7 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/goldfish.h>
+#include <linux/dma-mapping.h>
 
 /*
  * IMPORTANT: The following constants must match the ones used and defined
@@ -217,17 +218,19 @@ static int valid_batchbuffer_addr(struct goldfish_pipe_dev *dev,
 static int setup_access_params_addr(struct platform_device *pdev,
 					struct goldfish_pipe_dev *dev)
 {
-	u64 paddr;
+	dma_addr_t dma_handle;
 	struct access_params *aps;
 
-	aps = devm_kzalloc(&pdev->dev, sizeof(struct access_params), GFP_KERNEL);
-	if (!aps)
-		return -1;
+	aps = dmam_alloc_coherent(&pdev->dev, sizeof(struct access_params),
+				  &dma_handle, GFP_KERNEL);
+	if (!aps) {
+		dev_err(&pdev->dev, "allocate buffer failed\n");
+		return -ENOMEM;
+	}
 
-	/* FIXME */
-	paddr = __pa(aps);
-	writel((u32)(paddr >> 32), dev->base + PIPE_REG_PARAMS_ADDR_HIGH);
-	writel((u32)paddr, dev->base + PIPE_REG_PARAMS_ADDR_LOW);
+	writel((u32)((u64)dma_handle >> 32), dev->base +
+		PIPE_REG_PARAMS_ADDR_HIGH);
+	writel((u32)dma_handle, dev->base + PIPE_REG_PARAMS_ADDR_LOW);
 
 	if (valid_batchbuffer_addr(dev, aps)) {
 		dev->aps = aps;
-- 
2.1.4