[RESEND PATCH v2 14/23] hisi_sas: add v2 channel interrupt handler
From: John Garry
Date: Mon Jan 25 2016 - 13:40:52 EST
This also includes broadcast handler. Unlike v1 hw,
broadcast does not have its own dedicated interrupt.
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 79 ++++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 35ce7b6..5af2069 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -258,6 +258,7 @@ struct hisi_sas_complete_v2_hdr {
enum {
HISI_SAS_PHY_PHY_UPDOWN,
+ HISI_SAS_PHY_CHNL_INT,
HISI_SAS_PHY_INT_NR
};
@@ -783,8 +784,86 @@ end:
return res;
}
+static void phy_bcast_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+ unsigned long flags;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1);
+
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
+ CHL_INT0_SL_RX_BCST_ACK_MSK);
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 0);
+}
+
+static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 ent_msk, ent_tmp, irq_msk;
+ int phy_no = 0;
+
+ ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
+ ent_tmp = ent_msk;
+ ent_msk |= ENT_INT_SRC_MSK3_ENT95_MSK_MSK;
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_msk);
+
+ irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO) >>
+ HGC_INVLD_DQE_INFO_FB_CH3_OFF) & 0x1ff;
+
+ while (irq_msk) {
+ if (irq_msk & (1 << phy_no)) {
+ u32 irq_value0 = hisi_sas_phy_read32(hisi_hba, phy_no,
+ CHL_INT0);
+ u32 irq_value1 = hisi_sas_phy_read32(hisi_hba, phy_no,
+ CHL_INT1);
+ u32 irq_value2 = hisi_sas_phy_read32(hisi_hba, phy_no,
+ CHL_INT2);
+
+ if (irq_value1) {
+ if (irq_value1 & (CHL_INT1_DMAC_RX_ECC_ERR_MSK |
+ CHL_INT1_DMAC_TX_ECC_ERR_MSK))
+ panic("%s: DMAC RX/TX ecc bad error! (0x%x)",
+ dev_name(dev), irq_value1);
+
+ hisi_sas_phy_write32(hisi_hba, phy_no,
+ CHL_INT1, irq_value1);
+ }
+
+ if (irq_value2)
+ hisi_sas_phy_write32(hisi_hba, phy_no,
+ CHL_INT2, irq_value2);
+
+
+ if (irq_value0) {
+ if (irq_value0 & CHL_INT0_SL_RX_BCST_ACK_MSK)
+ phy_bcast_v2_hw(phy_no, hisi_hba);
+
+ hisi_sas_phy_write32(hisi_hba, phy_no,
+ CHL_INT0, irq_value0
+ & (~CHL_INT0_HOTPLUG_TOUT_MSK)
+ & (~CHL_INT0_SL_PHY_ENABLE_MSK)
+ & (~CHL_INT0_NOT_RDY_MSK));
+ }
+ }
+ irq_msk &= ~(1 << phy_no);
+ phy_no++;
+ }
+
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_tmp);
+
+ return IRQ_HANDLED;
+}
+
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_phy_updown_v2_hw,
+ int_chnl_int_v2_hw,
};
/**
--
1.9.1