Re: [PATCH 2/2] power: ucs1002: Add support for Programmable USB Port Power Controller

[kbuild test robot]

Hi Enric,

[auto build test WARNING on battery/master]
[also build test WARNING on v4.5-rc1 next-20160125]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]

url:    https://github.com/0day-ci/linux/commits/Enric-Balletbo-i-Serra/Add-UCS1002-USB-Port-Power-Controller/20160126-171717
base:   git://git.infradead.org/battery-2.6.git master


coccinelle warnings: (new ones prefixed by >>)

>> drivers/power/ucs1002_power.c:203:40-49: ERROR: info -> pdata is NULL but dereferenced.

vim +203 drivers/power/ucs1002_power.c

   187		/* Read the polarity setting determined by the SEL pin */
   188		ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, &regval);
   189		if (ret < 0)
   190			return ret;
   191	
   192		if (regval & F_SEL_PIN)
   193			val = enable ? F_PWR_EN_SET : 0;
   194		else
   195			val = enable ? 0 : F_PWR_EN_SET;
   196	
   197		if (info->pdata) {
   198			ret = regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
   199						 F_PWR_EN_SET, val);
   200			if (ret < 0)
   201				return ret;
   202		} else {
 > 203			gpiod_set_value_cansleep(info->pdata->gpiod_pwr, val ? 0 : 1);
   204		}
   205	
   206		info->enabled = enable;
   207	
   208		return 0;
   209	}
   210	
   211	static int ucs1002_get_online(struct ucs1002_info *info,

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation