[PATCH v2] regulator: core: Rely on regulator_dev_release to free constraints

[Charles Keepax]

As we now free the constraints in regulator_dev_release we will still
call free on the constraints pointer even if we went down an error
path in regulator_register, because it is only allocated after the
device_register. As such we no longer need to free rdev->constraints
on the error paths, so this patch removes said frees.

Fixes: 29f5f4860a8e ("regulator: core: Move more deallocation into class unregister")
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---

Changes since v1:
 - Remove the frees from the error path rather than always clearing
   the pointer after freeing

Thanks,
Charles

 drivers/regulator/core.c | 29 ++++++++++++-----------------
 1 file changed, 12 insertions(+), 17 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 744c988..4405be1 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1057,18 +1057,18 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 
 	ret = machine_constraints_voltage(rdev, rdev->constraints);
 	if (ret != 0)
-		goto out;
+		return ret;
 
 	ret = machine_constraints_current(rdev, rdev->constraints);
 	if (ret != 0)
-		goto out;
+		return ret;
 
 	if (rdev->constraints->ilim_uA && ops->set_input_current_limit) {
 		ret = ops->set_input_current_limit(rdev,
 						   rdev->constraints->ilim_uA);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set input limit\n");
-			goto out;
+			return ret;
 		}
 	}
 
@@ -1077,21 +1077,20 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = suspend_prepare(rdev, rdev->constraints->initial_state);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set suspend state\n");
-			goto out;
+			return ret;
 		}
 	}
 
 	if (rdev->constraints->initial_mode) {
 		if (!ops->set_mode) {
 			rdev_err(rdev, "no set_mode operation\n");
-			ret = -EINVAL;
-			goto out;
+			return -EINVAL;
 		}
 
 		ret = ops->set_mode(rdev, rdev->constraints->initial_mode);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set initial mode: %d\n", ret);
-			goto out;
+			return ret;
 		}
 	}
 
@@ -1102,7 +1101,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = _regulator_do_enable(rdev);
 		if (ret < 0 && ret != -EINVAL) {
 			rdev_err(rdev, "failed to enable\n");
-			goto out;
+			return ret;
 		}
 	}
 
@@ -1111,7 +1110,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set ramp_delay\n");
-			goto out;
+			return ret;
 		}
 	}
 
@@ -1119,7 +1118,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_pull_down(rdev);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set pull down\n");
-			goto out;
+			return ret;
 		}
 	}
 
@@ -1127,7 +1126,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_soft_start(rdev);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set soft start\n");
-			goto out;
+			return ret;
 		}
 	}
 
@@ -1136,16 +1135,12 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		ret = ops->set_over_current_protection(rdev);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set over current protection\n");
-			goto out;
+			return ret;
 		}
 	}
 
 	print_constraints(rdev);
 	return 0;
-out:
-	kfree(rdev->constraints);
-	rdev->constraints = NULL;
-	return ret;
 }
 
 /**
@@ -3979,7 +3974,7 @@ unset_supplies:
 
 scrub:
 	regulator_ena_gpio_free(rdev);
-	kfree(rdev->constraints);
+
 wash:
 	device_unregister(&rdev->dev);
 	/* device core frees rdev */
-- 
2.1.4