Re: [PATCH 1/2] regmap: Add explict native endian flag to DT bindings

[Arnd Bergmann]

On Tuesday 26 January 2016 22:46:49 Mark Brown wrote:
> -Required properties:
> -- {big,little}-endian: these are boolean properties, if absent
> -  meaning that the CPU and the Device are in the same endianness mode,
> -  these properties are for register values and all the buffers only.
> +Optional properties:
> +- {big,little,native}-endian: these are boolean properties, if absent
> +  then the implementation will choose a default based on the device
> +  being controlled.  These properties are for register values and all
> +  the buffers only.  Native endian means that the CPU and device have
> +  the same endianness.

I think the rest of the file also needs to be changed, and we need some
more explanation about native-endian, which people might think is the
right one for them when it rarely is in reality (Broadcom MIPS being
one notable exception).

How about this version below?

	Arnd


diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt
dissimilarity index 91%
index b494f8b8ef72..0127be360fe8 100644
--- a/Documentation/devicetree/bindings/regmap/regmap.txt
+++ b/Documentation/devicetree/bindings/regmap/regmap.txt
@@ -1,47 +1,29 @@
-Device-Tree binding for regmap
-
-The endianness mode of CPU & Device scenarios:
-Index     Device     Endianness properties
----------------------------------------------------
-1         BE         'big-endian'
-2         LE         'little-endian'
-
-For one device driver, which will run in different scenarios above
-on different SoCs using the devicetree, we need one way to simplify
-this.
-
-Required properties:
-- {big,little}-endian: these are boolean properties, if absent
-  meaning that the CPU and the Device are in the same endianness mode,
-  these properties are for register values and all the buffers only.
-
-Examples:
-Scenario 1 : CPU in LE mode & device in LE mode.
-dev: dev@40031000 {
-	      compatible = "name";
-	      reg = <0x40031000 0x1000>;
-	      ...
-};
-
-Scenario 2 : CPU in LE mode & device in BE mode.
-dev: dev@40031000 {
-	      compatible = "name";
-	      reg = <0x40031000 0x1000>;
-	      ...
-	      big-endian;
-};
-
-Scenario 3 : CPU in BE mode & device in BE mode.
-dev: dev@40031000 {
-	      compatible = "name";
-	      reg = <0x40031000 0x1000>;
-	      ...
-};
-
-Scenario 4 : CPU in BE mode & device in LE mode.
-dev: dev@40031000 {
-	      compatible = "name";
-	      reg = <0x40031000 0x1000>;
-	      ...
-	      little-endian;
-};
+Devicetree binding for regmap
+
+Optional properties:
+
+   little-endian,
+   big-endian,
+   native-endian:	See common-properties.txt for a definition
+
+Note:
+Regmap defaults to little-endian register access on MMIO based
+devices, this is by far the most common setting. On CPU
+architectures that typically run big-endian operating systems
+(e.g. PowerPC), registers can be defined as big-endian and must
+be marked that way in the devicetree.
+
+On SoCs that can be operated in both big-endian and little-endian
+modes, with a single hardware switch controlling both the endianess
+of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
+chips), "native-endian" is used to allow using the same device tree
+blob in both cases.
+
+Examples:
+Scenario 1 : a register set in big-endian mode.
+dev: dev@40031000 {
+	      compatible = "syscon";
+	      reg = <0x40031000 0x1000>;
+	      big-endian;
+	      ...
+};