[PATCH 4.1 029/127] ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly

[Greg Kroah-Hartman]

4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anssi Hannula <anssi.hannula@xxxxxx>

commit 42e3121d90f42e57f6dbd6083dff2f57b3ec7daa upstream.

AudioQuest DragonFly DAC reports a volume control range of 0..50
(0x0000..0x0032) which in USB Audio means a range of 0 .. 0.2dB, which
is obviously incorrect and would cause software using the dB information
in e.g. volume sliders to have a massive volume difference in 100..102%
range.

Commit 2d1cb7f658fb ("ALSA: usb-audio: add dB range mapping for some
devices") added a dB range mapping for it with range 0..50 dB.

However, the actual volume mapping seems to be neither linear volume nor
linear dB scale, but instead quite close to the cubic mapping e.g.
alsamixer uses, with a range of approx. -53...0 dB.

Replace the previous quirk with a custom dB mapping based on some basic
output measurements, using a 10-item range TLV (which will still fit in
alsa-lib MAX_TLV_RANGE_SIZE).

Tested on AudioQuest DragonFly HW v1.2. The quirk is only applied if the
range is 0..50, so if this gets fixed/changed in later HW revisions it
will no longer be applied.

v2: incorporated Takashi Iwai's suggestion for the quirk application
method

Signed-off-by: Anssi Hannula <anssi.hannula@xxxxxx>
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 sound/usb/mixer.c        |    2 ++
 sound/usb/mixer_maps.c   |   12 ------------
 sound/usb/mixer_quirks.c |   37 +++++++++++++++++++++++++++++++++++++
 sound/usb/mixer_quirks.h |    4 ++++
 4 files changed, 43 insertions(+), 12 deletions(-)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1336,6 +1336,8 @@ static void build_feature_ctl(struct mix
 		}
 	}
 
+	snd_usb_mixer_fu_apply_quirk(state->mixer, cval, unitid, kctl);
+
 	range = (cval->max - cval->min) / cval->res;
 	/*
 	 * Are there devices with volume range more than 255? I use a bit more
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -348,13 +348,6 @@ static struct usbmix_name_map bose_compa
 	{ 0 }	/* terminator */
 };
 
-/* Dragonfly DAC 1.2, the dB conversion factor is 1 instead of 256 */
-static struct usbmix_dB_map dragonfly_1_2_dB = {0, 5000};
-static struct usbmix_name_map dragonfly_1_2_map[] = {
-	{ 7, NULL, .dB = &dragonfly_1_2_dB },
-	{ 0 }	/* terminator */
-};
-
 /*
  * Control map entries
  */
@@ -470,11 +463,6 @@ static struct usbmix_ctl_map usbmix_ctl_
 		.id = USB_ID(0x05a7, 0x1020),
 		.map = bose_companion5_map,
 	},
-	{
-		/* Dragonfly DAC 1.2 */
-		.id = USB_ID(0x21b4, 0x0081),
-		.map = dragonfly_1_2_map,
-	},
 	{ 0 } /* terminator */
 };
 
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -37,6 +37,7 @@
 #include <sound/control.h>
 #include <sound/hwdep.h>
 #include <sound/info.h>
+#include <sound/tlv.h>
 
 #include "usbaudio.h"
 #include "mixer.h"
@@ -1842,4 +1843,40 @@ void snd_usb_mixer_rc_memory_change(stru
 		break;
 	}
 }
+
+static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
+					 struct snd_kcontrol *kctl)
+{
+	/* Approximation using 10 ranges based on output measurement on hw v1.2.
+	 * This seems close to the cubic mapping e.g. alsamixer uses. */
+	static const DECLARE_TLV_DB_RANGE(scale,
+		 0,  1, TLV_DB_MINMAX_ITEM(-5300, -4970),
+		 2,  5, TLV_DB_MINMAX_ITEM(-4710, -4160),
+		 6,  7, TLV_DB_MINMAX_ITEM(-3884, -3710),
+		 8, 14, TLV_DB_MINMAX_ITEM(-3443, -2560),
+		15, 16, TLV_DB_MINMAX_ITEM(-2475, -2324),
+		17, 19, TLV_DB_MINMAX_ITEM(-2228, -2031),
+		20, 26, TLV_DB_MINMAX_ITEM(-1910, -1393),
+		27, 31, TLV_DB_MINMAX_ITEM(-1322, -1032),
+		32, 40, TLV_DB_MINMAX_ITEM(-968, -490),
+		41, 50, TLV_DB_MINMAX_ITEM(-441, 0),
+	);
+
+	usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk\n");
+	kctl->tlv.p = scale;
+	kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
+	kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+}
+
+void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
+				  struct usb_mixer_elem_info *cval, int unitid,
+				  struct snd_kcontrol *kctl)
+{
+	switch (mixer->chip->usb_id) {
+	case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
+		if (unitid == 7 && cval->min == 0 && cval->max == 50)
+			snd_dragonfly_quirk_db_scale(mixer, kctl);
+		break;
+	}
+}
 
--- a/sound/usb/mixer_quirks.h
+++ b/sound/usb/mixer_quirks.h
@@ -9,5 +9,9 @@ void snd_emuusb_set_samplerate(struct sn
 void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer,
 				    int unitid);
 
+void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
+				  struct usb_mixer_elem_info *cval, int unitid,
+				  struct snd_kcontrol *kctl);
+
 #endif /* SND_USB_MIXER_QUIRKS_H */