[PATCH 3.10 13/53] ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xiong Zhang <xiong.y.zhang@xxxxxxxxx>

commit 3e6db33aaf1d42a30339f831ec4850570d6cc7a3 upstream.

It takes three minutes to enter into hibernation on some OEM SKL
machines and we see many codec spurious response after thaw() opertion.
This is because HDA is still in D0 state after freeze() call and
pci_pm_freeze/pci_pm_freeze_noirq() don't set D3 hot in pci_bus driver.
It seems bios still access HDA when system enter into freeze state,
HDA will receive codec response interrupt immediately after thaw() call.
Because of this unexpected interrupt, HDA enter into a abnormal
state and slow down the system enter into hibernation.

In this patch, we put HDA into D3 hot state in azx_freeze_noirq() and
put HDA into D0 state in azx_thaw_noirq().

V2: Only apply this fix to SKL+
    Fix compile error when CONFIG_PM_SLEEP isn't defined

[Yet another fix for CONFIG_PM_SLEEP ifdef and the additional comment
 by tiwai]

Signed-off-by: Xiong Zhang <xiong.y.zhang@xxxxxxxxx>
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 sound/pci/hda/hda_intel.c |   34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1104,6 +1104,36 @@ static unsigned int azx_get_response(str
 		return azx_rirb_get_response(bus, addr);
 }
 
+#ifdef CONFIG_PM_SLEEP
+/* put codec down to D3 at hibernation for Intel SKL+;
+ * otherwise BIOS may still access the codec and screw up the driver
+ */
+#define IS_SKL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa170)
+#define IS_SKL_LP(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9d70)
+#define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98)
+#define IS_SKL_PLUS(pci) (IS_SKL(pci) || IS_SKL_LP(pci) || IS_BXT(pci))
+
+static int azx_freeze_noirq(struct device *dev)
+{
+	struct pci_dev *pci = to_pci_dev(dev);
+
+	if (IS_SKL_PLUS(pci))
+		pci_set_power_state(pci, PCI_D3hot);
+
+	return 0;
+}
+
+static int azx_thaw_noirq(struct device *dev)
+{
+	struct pci_dev *pci = to_pci_dev(dev);
+
+	if (IS_SKL_PLUS(pci))
+		pci_set_power_state(pci, PCI_D0);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
 #ifdef CONFIG_PM
 static void azx_power_notify(struct hda_bus *bus, bool power_up);
 #endif
@@ -2974,6 +3004,10 @@ static int azx_runtime_idle(struct devic
 #ifdef CONFIG_PM
 static const struct dev_pm_ops azx_pm = {
 	SET_SYSTEM_SLEEP_PM_OPS(azx_suspend, azx_resume)
+#ifdef CONFIG_PM_SLEEP
+	.freeze_noirq = azx_freeze_noirq,
+	.thaw_noirq = azx_thaw_noirq,
+#endif
 	SET_RUNTIME_PM_OPS(azx_runtime_suspend, azx_runtime_resume, azx_runtime_idle)
 };