Re: [PATCH 3/3] ARM: dts: vf610: add remaining SAI instaces
From: Stefan Agner
Date: Wed Jan 27 2016 - 19:34:55 EST
Hi Shawn,
The rest of the patchset has been applied during rc phase of v4.4, I
guess this one was scheduled for the next release (v4.5). However, I
just realized that this seemed to have slipped through...
--
Stefan
On 2015-10-17 21:05, Stefan Agner wrote:
> This adds the remaining SAI instances SAI0, SAI1 and SAI3. All
> instances are very similar, except that the DMA channel of SAI3
> is available on MUX1 (compared to MUX0 for SAI0-SAI2). Also,
> SAI3 has a slightly different memory map due to a deeper FIFO,
> however in practice the current driver works for SAI3 fine.
>
> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
> ---
> arch/arm/boot/dts/vfxxx.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
> index c2a4d1c..b45bc81 100644
> --- a/arch/arm/boot/dts/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/vfxxx.dtsi
> @@ -174,6 +174,34 @@
> status = "disabled";
> };
>
> + sai0: sai@4002f000 {
> + compatible = "fsl,vf610-sai";
> + reg = <0x4002f000 0x1000>;
> + interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks VF610_CLK_SAI0>,
> + <&clks VF610_CLK_SAI0_DIV>,
> + <&clks 0>, <&clks 0>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 0 17>,
> + <&edma0 0 16>;
> + status = "disabled";
> + };
> +
> + sai1: sai@40030000 {
> + compatible = "fsl,vf610-sai";
> + reg = <0x40030000 0x1000>;
> + interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks VF610_CLK_SAI1>,
> + <&clks VF610_CLK_SAI1_DIV>,
> + <&clks 0>, <&clks 0>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 0 19>,
> + <&edma0 0 18>;
> + status = "disabled";
> + };
> +
> sai2: sai@40031000 {
> compatible = "fsl,vf610-sai";
> reg = <0x40031000 0x1000>;
> @@ -188,6 +216,20 @@
> status = "disabled";
> };
>
> + sai3: sai@40032000 {
> + compatible = "fsl,vf610-sai";
> + reg = <0x40032000 0x1000>;
> + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks VF610_CLK_SAI3>,
> + <&clks VF610_CLK_SAI3_DIV>,
> + <&clks 0>, <&clks 0>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 9>,
> + <&edma0 1 8>;
> + status = "disabled";
> + };
> +
> pit: pit@40037000 {
> compatible = "fsl,vf610-pit";
> reg = <0x40037000 0x1000>;