Re: [PATCH] genirq: fix trigger flags check for shared irqs

[Thomas Gleixner]

Brian,

On Thu, 28 Jan 2016, Brian Starkey wrote:
> On Tue, Jan 26, 2016 at 09:45:32PM +0100, Thomas Gleixner wrote:
> > On Tue, 26 Jan 2016, Brian Starkey wrote:
> > 
> > > For shared interrupts, if one requester passes in any IRQF_TRIGGER_*
> > > flags whilst another doesn't, __setup_irq() can erroneously fail.
> > > 
> > > The no-flags case should be treated as "already configured", so change
> > > __setup_irq() to only check that the flags match if any have been
> > > provided.
> > 
> > What happens if that "already configured", i.e. the default setting, is
> > conflicting with the newly requested interrupt?
> > 
> > I rather prefer the failure than the resulting silent wreckage.
> > 
> 
> Yes, I agree that would be best avoided. It seems to me that this case
> is actually handled a bit lower down:
> 
> 	} else if (new->flags & IRQF_TRIGGER_MASK) {
> 		unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK;
> 		unsigned int omsk = irq_settings_get_trigger_mask(desc);
> 
> 		if (nmsk != omsk)
> 			/* hope the handler works with current  trigger mode
> */
> 			pr_warning("irq %d uses trigger mode %u; requested
> %u\n",
> 				   irq, nmsk, omsk);
> 	}
> 
> Perhaps that should be louder/fatal?

Perhaps. So what's the actual problem case you are trying to solve?

Thanks,

	tglx