Re: [PATCH 1/2] iio: si7020: add support for Hoperf th06

[Jonathan Cameron]

On 26/01/16 20:17, Cristina Moraru wrote:
> This patch adds support for Hoperf th06 humidity and
> temperature sensor as it uses same register definitions
> as si7020
> 
> th06 Datasheet: http://www.hoperf.com/upload/sensor/TH06.pdf
> 
> Signed-off-by: Cristina Moraru <cristina.moraru09@xxxxxxxxx>
Applied - thanks,

Jonathan
> ---
> Previously sent: http://marc.info/?l=linux-iio&m=145255305514311&w=2
> 
>  drivers/iio/humidity/Kconfig  | 3 ++-
>  drivers/iio/humidity/si7020.c | 1 +
>  2 files changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
> index 6a23698..c1f3a21 100644
> --- a/drivers/iio/humidity/Kconfig
> +++ b/drivers/iio/humidity/Kconfig
> @@ -50,7 +50,8 @@ config SI7020
>  	depends on I2C
>  	help
>  	  Say yes here to build support for the Silicon Labs Si7013/20/21
> -	  Relative Humidity and Temperature Sensors.
> +	  Relative Humidity and Temperature Sensors. This driver also
> +	  supports Hoperf TH06 Humidity and Temperature Sensor.
>  
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called si7020.
> diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
> index 71991b5..5ab4e06 100644
> --- a/drivers/iio/humidity/si7020.c
> +++ b/drivers/iio/humidity/si7020.c
> @@ -149,6 +149,7 @@ static int si7020_probe(struct i2c_client *client,
>  
>  static const struct i2c_device_id si7020_id[] = {
>  	{ "si7020", 0 },
> +	{ "th06", 0 },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(i2c, si7020_id);
>