RE: dom0 show call trace and failed to boot on HSW-EX platform

[Li, Liang Z]

> >> We found dom0 will crash when booing on HSW-EX server, the dom0
> >> kernel version is v4.4. By debugging I found the your patch '
> >> x86/xen: discard RAM regions above the maximum reservation' , which
> the commit ID is : f5775e0b6116b7e2425ccf535243b21 caused the regression.
> The debug message is listed below:
> >>
> ==========================================================
> >>  (XEN) mm.c:884:d0v14 pg_owner 0 l1e_owner 0, but real_pg_owner -1
> >>  (XEN) mm.c:955:d0v14 Error getting mfn 1080000 (pfn
> >> ffffffffffffffff) from L1
> >>  (XEN) mm.c:1269:d0v14 Failure in alloc_l1_table: entry 0
> >>  (XEN) mm.c:2175:d0v14 Error while validating mfn 188d903 (pfn
> >> 17a7cc) for type
> >>  (XEN) mm.c:3101:d0v14 Error -16 while pinning mfn 188d903
> >>  [   33.768792] ------------[ cut here ]------------
> >> WARNING: CPU: 14 PID: 1 at arch/x86/xen/multicalls.c:129 xen_mc_
> >>  [   33.783809] Modules linked in:
> >>  [   33.787304] CPU: 14 PID: 1 Comm: swapper/0 Not tainted 4.4.0 #1
> >>  [   33.793991] Hardware name: Intel Corporation BRICKLAND/BRICKLAND,
> BIOS
> >>  [   33.805624]  0000000000000081 ffff88017d2537c8 ffffffff812ff954
> 000000000000
> >>  [   33.813961]  0000000000000000 0000000000000081 0000000000000000
> ffff88017d25
> >>  [   33.822300]  ffffffff810ca120 ffffffff81cb7f00 ffff8801879ca280
> 000000000000
> >>  [   33.830639] Call Trace:
> >>  [   33.833457]  [<ffffffff812ff954>] dump_stack+0x48/0x64
> >>  [   33.839277]  [<ffffffff810ca120>] warn_slowpath_common+0x90/0xd0
> >>  [   33.846058]  [<ffffffff810ca175>] warn_slowpath_null+0x15/0x20
> >>  [   33.852659]  [<ffffffff81060133>] xen_mc_flush+0x1c3/0x1d0
> >>  [   33.858858]  [<ffffffff8106449f>] xen_alloc_pte+0x20f/0x300
> >>  [   33.865158]  [<ffffffff810beef5>] ? update_page_count+0x45/0x60
> >>  [   33.871855]  [<ffffffff817a1194>] ? phys_pte_init+0x170/0x183
> >>  [   33.878345]  [<ffffffff817a148d>] phys_pmd_init+0x2e6/0x389
> >>  [   33.884649]  [<ffffffff817a17dd>] phys_pud_init+0x2ad/0x3dc
> >>  [   33.890954]  [<ffffffff817a290d>]
> kernel_physical_mapping_init+0xec/0x211
> >>  [   33.898613]  [<ffffffff8179df8d>] init_memory_mapping+0x17d/0x2f0
> >>  [   33.905496]  [<ffffffff81104f11>] ?
> __raw_callee_save___pv_queued_spin_unloc[2
> 4;80H
> >>  [   33.914516]  [<ffffffff813643f7>] ?
> acpi_os_signal_semaphore+0x2e/0x32
> >>  [   33.921889]  [<ffffffff810ba7b8>] arch_add_memory+0x48/0xf0
> >>  [   33.928186]  [<ffffffff8179eb80>] add_memory_resource+0x80/0x110
> >>  [   33.934967]  [<ffffffff8179ec8d>] add_memory+0x7d/0xc0
> >>  [   33.940787]  [<ffffffff81399538>]
> acpi_memory_device_add+0x14f/0x237
> 
> We shouldn't be adding memory based on the ACPI tables.
> 
> David

To solve this issue, what's your suggestion, simply revert? Or with a workaround?

Liang