Re: [PATCH 06/14] ARM: dts: sun8i-a83t: Correct low speed oscillator clocks

[Maxime Ripard]

1;4002;0c
On Sun, Jan 31, 2016 at 09:20:58AM +0800, Vishnu Patekar wrote:
> From: Chen-Yu Tsai <wens@xxxxxxxx>
> 
> The A83T does not have a 32.768 kHz low speed oscillator, either as
> an external crystal or input. It has a 16 MHz RC-based (inaccurate)
> internal oscillator, which is then divided by 512 for a clock close
> to 32 kHz.
> 
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
> ---
>  arch/arm/boot/dts/sun8i-a83t.dtsi | 21 ++++++++++++++++++---
>  1 file changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index 8d27b63..45b725c 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -118,6 +118,7 @@
>  		#size-cells = <1>;
>  		ranges;
>  
> +		/* TODO: PRCM block has a mux for this. */
>  		osc24M: osc24M_clk {
>  			#clock-cells = <0>;
>  			compatible = "fixed-clock";
> @@ -125,11 +126,25 @@
>  			clock-output-names = "osc24M";
>  		};
>  
> -		osc32k: osc32k_clk {
> +		/*
> +		 * This is called "internal OSC" in some places.
> +		 * It is an internal RC-based oscillator.
> +		 * TODO: Its controls are in the PRCM block.
> +		 */
> +		osc16M: osc16M_clk {
>  			#clock-cells = <0>;
>  			compatible = "fixed-clock";
> -			clock-frequency = <32768>;
> -			clock-output-names = "osc32k";
> +			clock-frequency = <16000000>;
> +			clock-output-names = "osc16M";
> +		};
> +
> +		osc16Md512: osc16Md512_clk {
> +			#clock-cells = <0>;
> +			compatible = "fixed-factor-clock";
> +			clock-div = <512>;
> +			clock-mult = <1>;
> +			clocks = <&osc16M>;
> +			clock-output-names = "osc16Md512";

We've been using a dash to separate between the clock and its divider
on other SoCs.

I changed that and applied the patch.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature