[PATCH v3 05/10] Input: synaptics-rmi4: Add device tree support for 2d sensors and F11
From: Andrew Duggan
Date: Tue Feb 02 2016 - 20:45:23 EST
2D sensors have several parameter which can be set in the platform data.
This patch adds support for getting those values from devicetree.
Signed-off-by: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
---
.../bindings/input/rmi4/rmi_2d_sensor.txt | 56 +++++++++++
.../bindings/input/touchscreen/touchscreen.txt | 2 +
drivers/input/rmi4/rmi_2d_sensor.c | 108 +++++++++++++++++++++
drivers/input/rmi4/rmi_2d_sensor.h | 3 +
drivers/input/rmi4/rmi_f11.c | 7 +-
5 files changed, 175 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
new file mode 100644
index 0000000..470d326
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
@@ -0,0 +1,56 @@
+Synaptics RMI4 2D Sensor Device Binding
+
+The Synaptics RMI4 core is able to support RMI4 devices using different
+transports and different functions. This file describes the device tree
+bindings for devices which contain 2D sensors using Function 11 or
+Function 12. Complete documentation for transports and other functions
+can be found in:
+Documentation/devicetree/bindings/input/rmi4.
+
+RMI4 Function 11 and Function 12 are for 2D touch position sensing.
+Additional documentation for F11 can be found at:
+http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
+
+Optional Touch Properties:
+Description in Documentation/devicetree/bindings/input/touch
+- touchscreen-inverted-x
+- touchscreen-inverted-y
+- touchscreen-swapped-x-y
+- touchscreen-mm-x
+- touchscreen-mm-y
+
+Optional Properties:
+- syna,clip-x-low: Sets a minimum value for X.
+- syna,clip-y-low: Sets a minimum value for Y.
+- syna,clip-x-high: Sets a maximum value for X.
+- syna,clip-y-high: Sets a maximum value for Y.
+- syna,offset-x: Add an offset to X.
+- syna,offset-y: Add an offset to Y.
+- syna,delta-x-threshold: Set the minimum distance on the X axis required
+ to generate an interrupt in reduced reporting
+ mode.
+- syna,delta-y-threshold: Set the minimum distance on the Y axis required
+ to generate an interrupt in reduced reporting
+ mode.
+- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad.
+- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to
+ disable reporing absolute position data.
+- syna,rezero-wait-msec: Time in miliseconds to wait after issuing a rezero
+ command.
+
+
+Example of a RMI4 I2C device with F11:
+Example:
+ &i2c1 {
+ rmi4-i2c-dev@2c {
+ compatible = "syna,rmi4-i2c";
+
+ ...
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-y;
+ syna,sensor-type = <2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
index ac23caf..d6674de 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@@ -18,6 +18,8 @@ Optional properties for Touchscreens:
- touchscreen-inverted-y : Y axis is inverted (boolean)
- touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
Swapping is done after inverting the axis
+ - touchscreen-mm-x : horizontal length in mm of the touchscreen
+ - touchscreen-mm-y : vertical length in mm of the touchscreen
Deprecated properties for Touchscreens:
- x-size : deprecated name for touchscreen-size-x
diff --git a/drivers/input/rmi4/rmi_2d_sensor.c b/drivers/input/rmi4/rmi_2d_sensor.c
index 8f48647..2661ea0 100644
--- a/drivers/input/rmi4/rmi_2d_sensor.c
+++ b/drivers/input/rmi4/rmi_2d_sensor.c
@@ -219,3 +219,111 @@ int rmi_2d_sensor_configure_input(struct rmi_function *fn,
return 0;
}
EXPORT_SYMBOL_GPL(rmi_2d_sensor_configure_input);
+
+#ifdef CONFIG_OF
+int rmi_2d_sensor_of_probe(struct device *dev,
+ struct rmi_2d_sensor_platform_data *pdata)
+{
+ int retval;
+ u32 val;
+
+ pdata->axis_align.swap_axes = of_property_read_bool(dev->of_node,
+ "touchscreen-swapped-x-y");
+
+ pdata->axis_align.flip_x = of_property_read_bool(dev->of_node,
+ "touchscreen-inverted-x");
+
+ pdata->axis_align.flip_y = of_property_read_bool(dev->of_node,
+ "touchscreen-inverted-y");
+
+ retval = rmi_of_property_read_u32(dev, &val, "syna,clip-x-low", 1);
+ if (retval)
+ return retval;
+
+ pdata->axis_align.clip_x_low = val;
+
+ retval = rmi_of_property_read_u32(dev, &val, "syna,clip-y-low", 1);
+ if (retval)
+ return retval;
+
+ pdata->axis_align.clip_y_low = val;
+
+ retval = rmi_of_property_read_u32(dev, &val, "syna,clip-x-high", 1);
+ if (retval)
+ return retval;
+
+ pdata->axis_align.clip_x_high = val;
+
+ retval = rmi_of_property_read_u32(dev, &val, "syna,clip-y-high", 1);
+ if (retval)
+ return retval;
+
+ pdata->axis_align.clip_y_high = val;
+
+ retval = rmi_of_property_read_u32(dev, &val, "syna,offset-x", 1);
+ if (retval)
+ return retval;
+
+ pdata->axis_align.offset_x = val;
+
+ retval = rmi_of_property_read_u32(dev, &val, "syna,offset-y", 1);
+ if (retval)
+ return retval;
+
+ pdata->axis_align.offset_y = val;
+
+ retval = rmi_of_property_read_u32(dev, &val, "syna,delta-x-threshold",
+ 1);
+ if (retval)
+ return retval;
+
+ pdata->axis_align.delta_x_threshold = val;
+
+ retval = rmi_of_property_read_u32(dev, &val, "syna,delta-y-threshold",
+ 1);
+ if (retval)
+ return retval;
+
+ pdata->axis_align.delta_y_threshold = val;
+
+ retval = rmi_of_property_read_u32(dev, (u32 *)&pdata->sensor_type,
+ "syna,sensor-type", 1);
+ if (retval)
+ return retval;
+
+ retval = rmi_of_property_read_u32(dev, &val, "touchscreen-mm-x", 1);
+ if (retval)
+ return retval;
+
+ pdata->x_mm = val;
+
+ retval = rmi_of_property_read_u32(dev, &val, "touchscreen-mm-y", 1);
+ if (retval)
+ return retval;
+
+ pdata->y_mm = val;
+
+ retval = rmi_of_property_read_u32(dev, &val,
+ "syna,disable-report-mask", 1);
+ if (retval)
+ return retval;
+
+ pdata->disable_report_mask = val;
+
+ retval = rmi_of_property_read_u32(dev, &val, "syna,rezero-wait-msec",
+ 1);
+ if (retval)
+ return retval;
+
+ pdata->rezero_wait = val;
+
+ return 0;
+}
+#else
+inline int rmi_2d_sensor_of_probe(struct device *dev,
+ struct rmi_2d_sensor_platform_data *pdata)
+{
+ return -ENODEV;
+}
+#endif
+EXPORT_SYMBOL_GPL(rmi_2d_sensor_of_probe);
diff --git a/drivers/input/rmi4/rmi_2d_sensor.h b/drivers/input/rmi4/rmi_2d_sensor.h
index 6a715d3..77fcdfe 100644
--- a/drivers/input/rmi4/rmi_2d_sensor.h
+++ b/drivers/input/rmi4/rmi_2d_sensor.h
@@ -69,6 +69,9 @@ struct rmi_2d_sensor {
u8 y_mm;
};
+int rmi_2d_sensor_of_probe(struct device *dev,
+ struct rmi_2d_sensor_platform_data *pdata);
+
void rmi_2d_sensor_abs_process(struct rmi_2d_sensor *sensor,
struct rmi_2d_sensor_abs_object *obj,
int slot);
diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
index 948a360b..77a5eb8 100644
--- a/drivers/input/rmi4/rmi_f11.c
+++ b/drivers/input/rmi4/rmi_f11.c
@@ -1059,8 +1059,13 @@ static int rmi_f11_initialize(struct rmi_function *fn)
if (!f11)
return -ENOMEM;
- if (pdata->sensor_pdata)
+ if (fn->dev.of_node) {
+ rc = rmi_2d_sensor_of_probe(&fn->dev, &f11->sensor_pdata);
+ if (rc)
+ return rc;
+ } else if (pdata->sensor_pdata) {
f11->sensor_pdata = *pdata->sensor_pdata;
+ }
f11->rezero_wait_ms = f11->sensor_pdata.rezero_wait;
--
2.5.0