[PATCH 0/4] Add Ethernet support on STM32F429

[Alexandre TORGUE]

STM32F429 Chip embeds a Synopsys 3.50a MAC IP.
This series:
	-enhance current stmmac driver to control it (code already available) and 
	 adds basic glue for STM32F429 chip.
	-Enable basic Net config in kernel.

Note that DT patches are not present because STM32 pinctrl code is not
yet avalaible.

Regards 

Alexandre

Alexandre TORGUE (4):
  net: ethernet: dwmac: add Ethernet glue logic for stm32 chip
  Documentation: Bindings: Add STM32 DWMAC glue
  net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP
  ARM: STM32: Enable Ethernet in stm32_defconfig

 .../devicetree/bindings/net/stm32-dwmac.txt        |  41 +++++
 arch/arm/configs/stm32_defconfig                   |   9 ++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  12 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c  | 177 +++++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   1 +
 6 files changed, 241 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c

-- 
1.9.1