[RFT PATCH] powerpc: convert amigaone_defconfig to use libata PATA drivers

[Bartlomiej Zolnierkiewicz]

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts amigaone_defconfig to use libata PATA
drivers.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
Build tested only.
If you have affected hardware please test.  Thank you.

 arch/powerpc/configs/amigaone_defconfig | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig
index 84f1b41..55a4929 100644
--- a/arch/powerpc/configs/amigaone_defconfig
+++ b/arch/powerpc/configs/amigaone_defconfig
@@ -46,12 +46,6 @@ CONFIG_PARPORT_PC_FIFO=y
 CONFIG_BLK_DEV_FD=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_BLK_DEV_VIA82CXXX=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -62,6 +56,10 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 # CONFIG_SCSI_SYM53C8XX_MMIO is not set
+CONFIG_ATA=y
+CONFIG_PATA_SIL680=y
+CONFIG_PATA_VIA=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 CONFIG_VORTEX=y
 CONFIG_8139CP=y
-- 
1.9.1