[PATCH v2] net: smc91x: propagate irq return code

[Robert Jarzmik]

The smc91x driver doesn't honor the probe deferral mechanism when the
interrupt source is not yet available, such as one provided by a gpio
controller not probed.

Fix this by propagating the platform_get_irq() error code as the probe
return value.

Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
Cc: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
Since v1: change the irq test to < 0
---
 drivers/net/ethernet/smsc/smc91x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 0e2fc1a844ab..db7db8ac4ca3 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2342,8 +2342,8 @@ static int smc_drv_probe(struct platform_device *pdev)
 	}
 
 	ndev->irq = platform_get_irq(pdev, 0);
-	if (ndev->irq <= 0) {
-		ret = -ENODEV;
+	if (ndev->irq < 0) {
+		ret = ndev->irq;
 		goto out_release_io;
 	}
 	/*
-- 
2.1.4