[PATCH net-next v8 12/19] net: fcoe: use __ethtool_get_ksettings

From: David Decotigny
Date: Tue Feb 09 2016 - 19:30:22 EST


From: David Decotigny <decot@xxxxxxxxxxxx>

Signed-off-by: David Decotigny <decot@xxxxxxxxxxxx>
---
drivers/scsi/fcoe/fcoe_transport.c | 36 ++++++++++++++++++++----------------
1 file changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c
index d7597c0..2d5909f 100644
--- a/drivers/scsi/fcoe/fcoe_transport.c
+++ b/drivers/scsi/fcoe/fcoe_transport.c
@@ -93,36 +93,40 @@ static struct notifier_block libfcoe_notifier = {
int fcoe_link_speed_update(struct fc_lport *lport)
{
struct net_device *netdev = fcoe_get_netdev(lport);
- struct ethtool_cmd ecmd;
+ struct ethtool_ksettings ecmd;

- if (!__ethtool_get_settings(netdev, &ecmd)) {
+ if (!__ethtool_get_ksettings(netdev, &ecmd)) {
lport->link_supported_speeds &= ~(FC_PORTSPEED_1GBIT |
FC_PORTSPEED_10GBIT |
FC_PORTSPEED_20GBIT |
FC_PORTSPEED_40GBIT);

- if (ecmd.supported & (SUPPORTED_1000baseT_Half |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_1000baseKX_Full))
+ if (ecmd.link_modes.supported[0] & (
+ SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_1000baseKX_Full))
lport->link_supported_speeds |= FC_PORTSPEED_1GBIT;

- if (ecmd.supported & (SUPPORTED_10000baseT_Full |
- SUPPORTED_10000baseKX4_Full |
- SUPPORTED_10000baseKR_Full |
- SUPPORTED_10000baseR_FEC))
+ if (ecmd.link_modes.supported[0] & (
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_10000baseKX4_Full |
+ SUPPORTED_10000baseKR_Full |
+ SUPPORTED_10000baseR_FEC))
lport->link_supported_speeds |= FC_PORTSPEED_10GBIT;

- if (ecmd.supported & (SUPPORTED_20000baseMLD2_Full |
- SUPPORTED_20000baseKR2_Full))
+ if (ecmd.link_modes.supported[0] & (
+ SUPPORTED_20000baseMLD2_Full |
+ SUPPORTED_20000baseKR2_Full))
lport->link_supported_speeds |= FC_PORTSPEED_20GBIT;

- if (ecmd.supported & (SUPPORTED_40000baseKR4_Full |
- SUPPORTED_40000baseCR4_Full |
- SUPPORTED_40000baseSR4_Full |
- SUPPORTED_40000baseLR4_Full))
+ if (ecmd.link_modes.supported[0] & (
+ SUPPORTED_40000baseKR4_Full |
+ SUPPORTED_40000baseCR4_Full |
+ SUPPORTED_40000baseSR4_Full |
+ SUPPORTED_40000baseLR4_Full))
lport->link_supported_speeds |= FC_PORTSPEED_40GBIT;

- switch (ethtool_cmd_speed(&ecmd)) {
+ switch (ecmd.parent.speed) {
case SPEED_1000:
lport->link_speed = FC_PORTSPEED_1GBIT;
break;
--
2.7.0.rc3.207.g0ac5344