Re: [PATCH v1 13/14] ASoC: qcom: add mic support
From: Kenneth Westfield
Date: Wed Feb 10 2016 - 15:10:31 EST
On Wed, Feb 10, 2016 at 02:20:03AM -0800, Srinivas Kandagatla wrote:
> diff --git a/sound/soc/qcom/lpass-platform.c
> b/sound/soc/qcom/lpass-platform.c
> index 26a046a..574aa33 100644
> --- a/sound/soc/qcom/lpass-platform.c
> +++ b/sound/soc/qcom/lpass-platform.c
...
> @@ -92,7 +93,13 @@ static int lpass_platform_pcmops_hw_params(struct
> snd_pcm_substream *substream,
> unsigned int regval;
> int dir = substream->stream;
> int bitwidth;
> - int ret, rdma_port = pcm_data->i2s_port + v->dmactl_audif_start;
> + int ch, ret, dma_port = pcm_data->i2s_port +
> v->dmactl_audif_start;
IMO, changing rdma_port to dma_port should be in patch 3 (ASoC: qcom:
rename rdmactl_audif_start to dmactrl_audif_start). However, as I
stated in my comments to your RFC submission, this is a nit.
...
> @@ -460,55 +483,106 @@ static int lpass_platform_pcm_new(struct
> snd_soc_pcm_runtime *soc_runtime)
> if (!data)
> return -ENOMEM;
>
> - if (v->alloc_dma_channel)
> - data->rdma_ch = v->alloc_dma_channel(drvdata,
> -
> SNDRV_PCM_STREAM_PLAYBACK);
> + data->i2s_port = cpu_dai->driver->id;
> + snd_soc_pcm_set_drvdata(soc_runtime, data);
>
> - if (IS_ERR_VALUE(data->rdma_ch))
> - return data->rdma_ch;
> + psubstream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
> + if (psubstream) {
> + if (v->alloc_dma_channel)
> + data->rdma_ch = v->alloc_dma_channel(drvdata,
> +
> SNDRV_PCM_STREAM_PLAYBACK);
>
> - drvdata->substream[data->rdma_ch] = substream;
> - data->i2s_port = cpu_dai->driver->id;
> + if (IS_ERR_VALUE(data->rdma_ch))
> + return data->rdma_ch;
>
> - snd_soc_pcm_set_drvdata(soc_runtime, data);
> + drvdata->substream[data->rdma_ch] = psubstream;
>
> - ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
> - soc_runtime->platform->dev,
> - size, &substream->dma_buffer);
> - if (ret)
> - return ret;
> + ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
> pcm->card->dev,
> + size, &psubstream->dma_buffer);
In patch 1 of this series (ASoC: qcom: use snd_dma_alloc/free* apis), you
correctly used the platform device for memory allocation. However, that is
then replaced by the soundcard device here ...
> + csubstream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
> + if (csubstream) {
> + if (v->alloc_dma_channel)
> + data->wrdma_ch = v->alloc_dma_channel(drvdata,
> + SNDRV_PCM_STREAM_CAPTURE);
> +
> + if (IS_ERR_VALUE(data->wrdma_ch))
> + goto capture_alloc_err;
> +
> + drvdata->substream[data->wrdma_ch] = csubstream;
> +
> + ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
> pcm->card->dev,
> + size, &csubstream->dma_buffer);
> + if (ret)
> + goto capture_alloc_err;
... and here as well.
--
Kenneth Westfield
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project