Re: [PATCH v2 3/3] ARM: dts: enable GPIO-a for Broadcom NSP

From: Florian Fainelli
Date: Thu Feb 11 2016 - 15:03:09 EST


On 04/12/15 09:12, Yendapally Reddy Dhananjaya Reddy wrote:
> This enables the GPIO-a support for Broadcom NSP SoC
>
> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yrdreddy@xxxxxxxxxxxx>

Finally applied to devicetree/next, since there was a bit of
restructuring with the addition of the ranges, please verify the results
look correct here:

https://github.com/Broadcom/stblinux/commit/018e4feb7584971b3dbda6daa6a8fef310cafbcb

> ---
> arch/arm/boot/dts/bcm-nsp.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
> index 58aca27..148d79e 100644
> --- a/arch/arm/boot/dts/bcm-nsp.dtsi
> +++ b/arch/arm/boot/dts/bcm-nsp.dtsi
> @@ -116,4 +116,16 @@
> status = "disabled";
> };
> };
> +
> + gpioa: gpio@18000020 {
> + compatible = "brcm,nsp-gpio-a";
> + reg = <0x18000020 0x70>,
> + <0x1803f1c4 0x1c>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + ngpios = <32>;
> + interrupt-controller;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-ranges = <&pinctrl 0 0 32>;
> + };
> };
>


--
Florian