[PATCH v8 01/10] mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings

[Chen-Yu Tsai]

The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs.
It is functionally identical to AXP221; only the regulator default
voltage/status and the external host interface are different.

Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/mfd/axp20x.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index a474359dd206..fd39fa54571b 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -5,11 +5,12 @@ axp152 (X-Powers)
 axp202 (X-Powers)
 axp209 (X-Powers)
 axp221 (X-Powers)
+axp223 (X-Powers)
 
 Required properties:
 - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209",
-	      "x-powers,axp221"
-- reg: The I2C slave address for the AXP chip
+	      "x-powers,axp221", "x-powers,axp223"
+- reg: The I2C slave address or RSB hardware address for the AXP chip
 - interrupt-parent: The parent interrupt controller
 - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
 - interrupt-controller: The PMIC has its own internal IRQs
@@ -51,7 +52,7 @@ LDO3		: LDO		: ldo3in-supply
 LDO4		: LDO		: ldo24in-supply	: shared supply
 LDO5		: LDO		: ldo5in-supply
 
-AXP221 regulators, type, and corresponding input supply names:
+AXP221/AXP223 regulators, type, and corresponding input supply names:
 
 Regulator	  Type		  Supply Name		  Notes
 ---------	  ----		  -----------		  -----
-- 
2.7.0