Re: [PATCH] mmc: sdhci-of-at91: fix card detect when using runtime PM

[Ludovic Desroches]

On Fri, Feb 12, 2016 at 12:01:39PM +0100, Ulf Hansson wrote:
> >>
> >> According to the below commit, SDHCI_QUIRK_BROKEN_CARD_DETECTION was
> >> invented because of unreliable card detection mechanism inside the
> >> sdhci controller.
> >> Therefore it required polling to be used, but also to make ->get_cd()
> >> to always return 1 in these cases.
> >>
> >> Although, as I understand it that's not the case here. You can still
> >> rely on card detection to work, but as you don't have wakeups you
> >> can't fully make use of card detect, when combined with runtime PM.
> >> I am not sure we should add more users of
> >> SDHCI_QUIRK_BROKEN_CARD_DETECTION, especially since in this case it's
> >> not reflecting the capability of the hardware.
> >>
> >> Can't we think of another way?
> >
> > Sorry but I am not sure to understand. In the previous thread, you told
> > me to use MMC_CAP_NEEDS_POLL which is set if we have
> > SDHCI_QUIRK_BROKEN_CARD_DETECTION. I was not confortable to do this
> > because as you say it is not reflecting the capability of the hardware.
> >
> > Do you mean that I can simply add MMC_CAP_NEEDS_POLL after sdhci_add_host()?
> 
> Yes, something like that, but...
> 
> Within this context, I realize that the DT binding "broken-cd" has two
> different meanings, while comparing the generic MMC bindings towards
> SDHCI's. That's bad.
> 
> In the SDHCI case it means, enable MMC_CAP_NEEDS_POLL *and* make
> ->get_cd() to always return 1 (via adding
> SDHCI_QUIRK_BROKEN_CARD_DETECTION).
> 
> In the generic MMC case, it means only to enable MMC_CAP_NEEDS_POLL,
> which is exactly what you want.
> 
> Perhaps you wonder why I think it's a good good idea to use DT to
> decide if MMC_CAP_NEEDS_POLL should be enabled?
> It allows flexibility for future platforms. For example, there may be
> platforms adding GPIO card detect support or even cards that's
> non-removable.

I agree.

> 
> I realize that the fix to solve this regression would then mean that
> sdhci-of-at91 need to clear SDHCI_QUIRK_BROKEN_CARD_DETECTION after
> parsing the shdci DTB, but then the DTB for your platform also needs
> an update as the "broken-cd" options needs to be set.
> 
> Do you think this can work?
> 

It should but as SDHCI_QUIRK_BROKEN_CARD_DETECTION, broken-cd is not
reflecting the capability of the hardware.

I was thinking about checking non-removable and using mmc_gpio_get_cd()
in my runtime_suspend callback. If I have a non removable device or a
gpio for card detection then I can disable all clocks and call
sdhci_runtime_suspend_host(). If not, I keep enabled the clock for the
'interface', disable the other one and that's all. The controller won't
be set as runtime suspended but I would save some power. Does it sounds
good?


Regards

Ludovic