[PATCH v4 2/4] x86/signal/64: Fix SS if needed when delivering a 64-bit signal
From: Andy Lutomirski
Date: Mon Feb 15 2016 - 21:38:32 EST
Signals are always delivered to 64-bit tasks with CS set to a long
mode segment. In long mode, SS doesn't matter as long as it's a
present writable segment.
If SS starts out invalid (this can happen if the signal was caused
by an IRET fault or was delivered on the way out of set_thread_area
or modify_ldt), then IRET to the signal handler can fail, eventually
killing the task.
The straightforward fix would be to simply reset SS when delivering
a signal. That breaks DOSEMU, though: 64-bit builds of DOSEMU rely
on SS being set to the faulting SS when signals are delivered.
As a compromise, this patch leaves SS alone so long as it's valid.
The net effect should be that the behavior of successfully delivered
signals is unchanged. Some signals that would previously have
failed to be delivered will now be delivered successfully.
This has no effect for x32 or 32-bit tasks: their signal handlers
were already called with SS == __USER_DS.
(On Xen, there's a slight hole: if a task sets SS to a writable
*kernel* data segment, then we will fail to identify it as invalid
and we'll still kill the task. If anyone cares, this could be fixed
with a new paravirt hook.)
Signed-off-by: Andy Lutomirski <luto@xxxxxxxxxx>
---
arch/x86/include/asm/desc_defs.h | 23 ++++++++++++++++++
arch/x86/kernel/signal.c | 51 ++++++++++++++++++++++++++++++++++++++--
2 files changed, 72 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index 278441f39856..eb5deb42484d 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -98,4 +98,27 @@ struct desc_ptr {
#endif /* !__ASSEMBLY__ */
+/* Access rights as returned by LAR */
+#define AR_TYPE_RODATA (0 * (1 << 9))
+#define AR_TYPE_RWDATA (1 * (1 << 9))
+#define AR_TYPE_RODATA_EXPDOWN (2 * (1 << 9))
+#define AR_TYPE_RWDATA_EXPDOWN (3 * (1 << 9))
+#define AR_TYPE_XOCODE (4 * (1 << 9))
+#define AR_TYPE_XRCODE (5 * (1 << 9))
+#define AR_TYPE_XOCODE_CONF (6 * (1 << 9))
+#define AR_TYPE_XRCODE_CONF (7 * (1 << 9))
+#define AR_TYPE_MASK (7 * (1 << 9))
+
+#define AR_DPL0 (0 * (1 << 13))
+#define AR_DPL3 (3 * (1 << 13))
+#define AR_DPL_MASK (3 * (1 << 13))
+
+#define AR_A (1 << 8) /* "Accessed" */
+#define AR_S (1 << 12) /* If clear, "System" segment */
+#define AR_P (1 << 15) /* "Present" */
+#define AR_AVL (1 << 20) /* "AVaiLable" (no HW effect) */
+#define AR_L (1 << 21) /* "Long mode" for code segments */
+#define AR_DB (1 << 22) /* D/B, effect depends on type */
+#define AR_G (1 << 23) /* "Granularity" (limit in pages) */
+
#endif /* _ASM_X86_DESC_DEFS_H */
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index cb6282c3638f..bb3e4208d90d 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -61,6 +61,35 @@
regs->seg = GET_SEG(seg) | 3; \
} while (0)
+#ifdef CONFIG_X86_64
+/*
+ * If regs->ss will cause an IRET fault, change it. Otherwise leave it
+ * alone. Using this generally makes no sense unless
+ * user_64bit_mode(regs) would return true.
+ */
+static void force_valid_ss(struct pt_regs *regs)
+{
+ u32 ar;
+ asm volatile ("lar %[old_ss], %[ar]\n\t"
+ "jz 1f\n\t" /* If invalid: */
+ "xorl %[ar], %[ar]\n\t" /* set ar = 0 */
+ "1:"
+ : [ar] "=r" (ar)
+ : [old_ss] "rm" ((u16)regs->ss));
+
+ /*
+ * For a valid 64-bit user context, we need DPL 3, type
+ * read-write data or read-write exp-down data, and S and P
+ * set. We can't use VERW because VERW doesn't check the
+ * P bit.
+ */
+ ar &= AR_DPL_MASK | AR_S | AR_P | AR_TYPE_MASK;
+ if (ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA) &&
+ ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA_EXPDOWN))
+ regs->ss = __USER_DS;
+}
+#endif
+
int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
{
unsigned long buf_val;
@@ -459,10 +488,28 @@ static int __setup_rt_frame(int sig, struct ksignal *ksig,
regs->sp = (unsigned long)frame;
- /* Set up the CS register to run signal handlers in 64-bit mode,
- even if the handler happens to be interrupting 32-bit code. */
+ /*
+ * Set up the CS and SS registers to run signal handlers in
+ * 64-bit mode, even if the handler happens to be interrupting
+ * 32-bit or 16-bit code.
+ *
+ * SS is subtle. In 64-bit mode, we don't need any particular
+ * SS descriptor, but we do need SS to be valid. It's possible
+ * that the old SS is entirely bogus -- this can happen if the
+ * signal we're trying to deliver is #GP or #SS caused by a bad
+ * SS value. We also have a compatbility issue here: DOSEMU
+ * relies on the contents of the SS register indicating the
+ * SS value at the time of the signal, even though that code in
+ * DOSEMU predates sigreturn's ability to restore SS. (DOSEMU
+ * avoids relying on sigreturn to restore SS; instead it uses
+ * a trampoline.) So we do our best: if the old SS was valid,
+ * we keep it. Otherwise we replace it.
+ */
regs->cs = __USER_CS;
+ if (unlikely(regs->ss != __USER_DS))
+ force_valid_ss(regs);
+
return 0;
}
#endif /* CONFIG_X86_32 */
--
2.5.0