Re: [PATCH v3 5/5] ACPI / processor_idle: Add support for Low Power Idle(LPI) states
From: Rafael J. Wysocki
Date: Tue Feb 16 2016 - 15:45:02 EST
On Wednesday, December 02, 2015 02:10:46 PM Sudeep Holla wrote:
> ACPI 6.0 introduced an optional object _LPI that provides an alternate
> method to describe Low Power Idle states. It defines the local power
> states for each node in a hierarchical processor topology. The OSPM can
> use _LPI object to select a local power state for each level of processor
> hierarchy in the system. They used to produce a composite power state
> request that is presented to the platform by the OSPM.
>
> Since multiple processors affect the idle state for any non-leaf hierarchy
> node, coordination of idle state requests between the processors is
> required. ACPI supports two different coordination schemes: Platform
> coordinated and OS initiated.
>
> This patch adds initial support for Platform coordination scheme of LPI.
>
> Cc: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
> Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx>
My first point here would be the same as for [4/5]: please don't introduce
new Kconfig options if you don't have to (and you clearly don't have to in this
case, because it all can be made work without new Kconfig options).
> ---
> drivers/acpi/Kconfig | 3 +
> drivers/acpi/bus.c | 8 +-
> drivers/acpi/processor_driver.c | 2 +-
> drivers/acpi/processor_idle.c | 440 +++++++++++++++++++++++++++++++++++-----
> include/acpi/processor.h | 30 ++-
> include/linux/acpi.h | 4 +
> 6 files changed, 435 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 12873f0b8141..89a2d9b81feb 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -51,6 +51,9 @@ config ARCH_MIGHT_HAVE_ACPI_PDC
> config ARCH_SUPPORTS_ACPI_PROCESSOR_CSTATE
> bool
>
> +config ARCH_SUPPORTS_ACPI_PROCESSOR_LPI
Not needed.
> + bool
> +
> config ACPI_GENERIC_GSI
> bool
>
> diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
> index a212cefae524..2e9e2e3fde6a 100644
> --- a/drivers/acpi/bus.c
> +++ b/drivers/acpi/bus.c
> @@ -301,6 +301,7 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context)
> EXPORT_SYMBOL(acpi_run_osc);
>
> bool osc_sb_apei_support_acked;
> +bool osc_pc_lpi_support_acked;
Maybe call it osc_pc_lpi_support_confirmed. And add a comment describing what
"PC LPI" means (a pointer to the relevant spec section might be useful too).
> static u8 sb_uuid_str[] = "0811B06E-4A27-44F9-8D60-3CBBC22E7B48";
> static void acpi_bus_osc_support(void)
> {
> @@ -321,6 +322,8 @@ static void acpi_bus_osc_support(void)
> capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PPC_OST_SUPPORT;
>
> capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_HOTPLUG_OST_SUPPORT;
> + if (IS_ENABLED(CONFIG_ARCH_SUPPORTS_ACPI_PROCESSOR_LPI))
> + capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PCLPI_SUPPORT;
>
> if (!ghes_disable)
> capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_APEI_SUPPORT;
> @@ -328,9 +331,12 @@ static void acpi_bus_osc_support(void)
> return;
> if (ACPI_SUCCESS(acpi_run_osc(handle, &context))) {
> u32 *capbuf_ret = context.ret.pointer;
> - if (context.ret.length > OSC_SUPPORT_DWORD)
> + if (context.ret.length > OSC_SUPPORT_DWORD) {
> osc_sb_apei_support_acked =
> capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_APEI_SUPPORT;
> + osc_pc_lpi_support_acked =
> + capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_PCLPI_SUPPORT;
> + }
> kfree(context.ret.pointer);
> }
> /* do we need to check other returned cap? Sounds no */
> diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
> index 29f787b2493f..bfc59de0ce6b 100644
> --- a/drivers/acpi/processor_driver.c
> +++ b/drivers/acpi/processor_driver.c
> @@ -90,7 +90,7 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
> pr->performance_platform_limit);
> break;
> case ACPI_PROCESSOR_NOTIFY_POWER:
> - acpi_processor_cst_has_changed(pr);
> + acpi_processor_power_state_has_changed(pr);
> acpi_bus_generate_netlink_event(device->pnp.device_class,
> dev_name(&device->dev), event, 0);
> break;
> diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
> index 9ca840c88f48..73192c08bc8c 100644
> --- a/drivers/acpi/processor_idle.c
> +++ b/drivers/acpi/processor_idle.c
> @@ -576,7 +576,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
> return (working);
> }
>
> -static int acpi_processor_get_power_info(struct acpi_processor *pr)
> +static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
> {
> unsigned int i;
> int result;
> @@ -810,31 +810,12 @@ static void acpi_idle_enter_freeze(struct cpuidle_device *dev,
> acpi_idle_do_entry(cx);
> }
>
> -/**
> - * acpi_processor_setup_cpuidle_cx - prepares and configures CPUIDLE
> - * device i.e. per-cpu data
> - *
> - * @pr: the ACPI processor
> - * @dev : the cpuidle device
> - */
> static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
> struct cpuidle_device *dev)
> {
> int i, count = CPUIDLE_DRIVER_STATE_START;
> struct acpi_processor_cx *cx;
>
> - if (!pr->flags.power_setup_done)
> - return -EINVAL;
> -
> - if (pr->flags.power == 0) {
> - return -EINVAL;
> - }
> -
> - if (!dev)
> - return -EINVAL;
> -
> - dev->cpu = pr->id;
> -
> if (max_cstate == 0)
> max_cstate = 1;
>
> @@ -857,31 +838,13 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
> return 0;
> }
>
> -/**
> - * acpi_processor_setup_cpuidle states- prepares and configures cpuidle
> - * global state data i.e. idle routines
> - *
> - * @pr: the ACPI processor
> - */
> -static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
> +static int acpi_processor_setup_cstates(struct acpi_processor *pr)
> {
> int i, count = CPUIDLE_DRIVER_STATE_START;
> struct acpi_processor_cx *cx;
> struct cpuidle_state *state;
> struct cpuidle_driver *drv = &acpi_idle_driver;
>
> - if (!pr->flags.power_setup_done)
> - return -EINVAL;
> -
> - if (pr->flags.power == 0)
> - return -EINVAL;
> -
> - drv->safe_state_index = -1;
> - for (i = CPUIDLE_DRIVER_STATE_START; i < CPUIDLE_STATE_MAX; i++) {
> - drv->states[i].name[0] = '\0';
> - drv->states[i].desc[0] = '\0';
> - }
> -
> if (max_cstate == 0)
> max_cstate = 1;
>
> @@ -893,7 +856,7 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
>
> state = &drv->states[count];
> snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
> - strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
> + strlcpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
> state->exit_latency = cx->latency;
> state->target_residency = cx->latency * latency_factor;
> state->enter = acpi_idle_enter;
> @@ -943,24 +906,407 @@ static inline void acpi_processor_cstate_first_run_checks(void)
>
> static inline int disabled_by_idle_boot_param(void) { return 0; }
> static inline void acpi_processor_cstate_first_run_checks(void) { }
> -static int acpi_processor_get_power_info(struct acpi_processor *pr)
> +static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
> {
> return -ENODEV;
> }
> -
Unrelated whitespace change.
> static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
> struct cpuidle_device *dev)
> {
> return -EINVAL;
> }
>
> -static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
> +static int acpi_processor_setup_cstates(struct acpi_processor *pr)
> +{
> + return -EINVAL;
> +}
> +#endif
> +
> +#ifdef CONFIG_ARCH_SUPPORTS_ACPI_PROCESSOR_LPI
> +
> +#define ACPI_LPI_STATE_FLAGS_ENABLED BIT(0)
> +
> +struct acpi_processor_lpi_info {
> + int state_count;
> + struct acpi_processor_lpi *lpix;
> +};
> +
> +static int acpi_processor_evaluate_lpi(acpi_handle handle,
> + struct acpi_processor_lpi_info *info)
> +{
> + acpi_status status = 0;
> + int ret;
> + int version, level, pkg_count, state_idx = 1, loop;
> + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> + union acpi_object *lpi;
> + struct acpi_processor_lpi *lpix;
> +
> + status = acpi_evaluate_object(handle, "_LPI", NULL, &buffer);
> + if (ACPI_FAILURE(status)) {
> + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _LPI, giving up\n"));
> + return -ENODEV;
> + }
> +
> + lpi = buffer.pointer;
> +
> + /* There must be at least 4 elements = 3 elements + 1 package */
> + if (!lpi || lpi->type != ACPI_TYPE_PACKAGE || lpi->package.count < 4) {
> + pr_info("not enough elements in _LPI\n");
pr_debug()? Plus maybe point to the LPI object in question in that message?
> + ret = -EFAULT;
-ENXIO? -EFAULT has a specific meaning which doesn't apply here.
> + goto end;
> + }
> +
> + version = lpi->package.elements[0].integer.value;
> + level = lpi->package.elements[1].integer.value;
> + pkg_count = lpi->package.elements[2].integer.value;
> +
> + /* Validate number of power states. */
> + if (pkg_count < 1 || pkg_count != lpi->package.count - 3) {
> + pr_err("count given by _LPI is not valid\n");
> + ret = -EFAULT;
Same comment.
> + goto end;
> + }
> +
> + lpix = kcalloc(pkg_count, sizeof(*lpix), GFP_KERNEL);
> + if (!lpix) {
> + ret = -ENOMEM;
> + goto end;
> + }
> +
> + info->state_count = pkg_count;
> + info->lpix = lpix;
> + /* LPI States start at index 3 */
> + for (loop = 3; state_idx <= pkg_count; loop++, state_idx++, lpix++) {
> + union acpi_object *element, *obj;
> +
> + element = &lpi->package.elements[loop];
> + if (element->type != ACPI_TYPE_PACKAGE)
> + continue;
> +
> + if (element->package.count < 7)
> + continue;
> +
> + /* TODO this long list is looking insane now
> + * need a cleaner and saner way to read the elements
> + */
Well, I'm not sure about the above comment. The code is what it is, anyone
can draw their own conclusions. :-)
I would consider storing the whole buffer instead of trying to decode it
upfront, though. You need to flatten it etc going forward, so maybe
decode it at that time?
Also I'm not sure about silent discarding things that look defective. I would
at least add a debug message to wherever this is done and maybe we can try
to fix up or fall back to some sane defaults at least in some cases?
> + obj = &element->package.elements[6];
> + if (obj->type == ACPI_TYPE_BUFFER) {
> + struct acpi_power_register *reg;
> +
> + reg = (struct acpi_power_register *)obj->buffer.pointer;
> + if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO &&
> + (reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE))
> + continue;
> + lpix->address = reg->address;
> + if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
> + lpix->entry_method = ACPI_CSTATE_FFH;
> + else
> + lpix->entry_method = ACPI_CSTATE_SYSTEMIO;
> + } else if (obj->type == ACPI_TYPE_INTEGER) {
> + lpix->entry_method = ACPI_CSTATE_INTEGER;
> + lpix->address = obj->integer.value;
> + } else {
> + continue;
> + }
> +
> + /* elements[7,8] skipped for now i.e. Residency/Usage counter*/
> +
> + obj = &element->package.elements[9];
> + if (obj->type == ACPI_TYPE_STRING)
> + strlcpy(lpix->desc, obj->string.pointer,
> + ACPI_CX_DESC_LEN);
> +
> + lpix->index = state_idx;
> +
> + obj = &element->package.elements[0];
> + if (obj->type != ACPI_TYPE_INTEGER)
> + continue;
> + lpix->min_residency = obj->integer.value;
> +
> + obj = &element->package.elements[1];
> + if (obj->type != ACPI_TYPE_INTEGER)
> + continue;
> + lpix->wake_latency = obj->integer.value;
> +
> + obj = &element->package.elements[2];
> + if (obj->type != ACPI_TYPE_INTEGER)
> + continue;
> + lpix->flags = obj->integer.value;
> +
> + obj = &element->package.elements[3];
> + if (obj->type != ACPI_TYPE_INTEGER)
> + continue;
> + lpix->arch_flags = obj->integer.value;
> +
> + obj = &element->package.elements[4];
> + if (obj->type != ACPI_TYPE_INTEGER)
> + continue;
> + lpix->res_cnt_freq = obj->integer.value;
> +
> + obj = &element->package.elements[5];
> + if (obj->type != ACPI_TYPE_INTEGER)
> + continue;
> + lpix->enable_parent_state = obj->integer.value;
> + }
> + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d power states\n",
> + state_idx));
> +end:
> + kfree(buffer.pointer);
> + return status;
> +}
> +
> +static int max_leaf_depth, fl_scnt;
> +/**
> + * combine_lpi_states - combine local and parent LPI states to form a
> + * composite LPI state
> + * @l_lpi: local LPI state
> + * @p_lpi: parent LPI state
> + * @c_lpi: composite LPI state
> + */
> +static void combine_lpi_states(struct acpi_processor_lpi *l_lpi,
> + struct acpi_processor_lpi *p_lpi,
> + struct acpi_processor_lpi *c_lpi)
> +{
> + c_lpi->min_residency = max(l_lpi->min_residency, p_lpi->min_residency);
> + c_lpi->wake_latency = l_lpi->wake_latency + p_lpi->wake_latency;
> + c_lpi->enable_parent_state = p_lpi->enable_parent_state;
> +
> + if (p_lpi->entry_method == ACPI_CSTATE_INTEGER) {
> + c_lpi->entry_method = l_lpi->entry_method;
> + c_lpi->address = l_lpi->address + p_lpi->address;
> + } else {
> + c_lpi->entry_method = l_lpi->entry_method;
> + c_lpi->address = p_lpi->address;
> + }
> +
> + c_lpi->index = p_lpi->index;
> + c_lpi->flags = p_lpi->flags;
> + c_lpi->arch_flags = p_lpi->arch_flags;
> +
> + strlcpy(c_lpi->desc, l_lpi->desc, ACPI_CX_DESC_LEN);
> + strlcat(c_lpi->desc, "+", ACPI_CX_DESC_LEN);
> + strlcat(c_lpi->desc, p_lpi->desc, ACPI_CX_DESC_LEN);
> +}
> +
> +static int flatten_lpi_states(struct acpi_processor *pr,
> + struct acpi_processor_lpi_info *info,
> + struct acpi_processor_lpi *lpi,
> + uint32_t depth)
> +{
> + int j, scount = info[depth].state_count;
> + struct acpi_processor_lpi *t = info[depth].lpix;
> +
> + for (j = 0; j < scount; j++, t++) {
> + struct acpi_processor_lpi *flpi;
> + bool valid = false;
> +
> + if (!(t->flags & ACPI_LPI_STATE_FLAGS_ENABLED))
> + continue;
> +
> + flpi = &pr->power.lpi_states[fl_scnt];
> + if (depth == max_leaf_depth) { /* leaf/processor node */
> + memcpy(flpi, t, sizeof(*t));
> + fl_scnt++;
> + valid = true;
> + } else if (lpi && t->index <= lpi->enable_parent_state) {
> + combine_lpi_states(lpi, t, flpi);
> + fl_scnt++;
> + valid = true;
> + }
> +
> + /*
> + * flatten recursively from leaf until the highest level
> + * (e.g. system) is reached
> + */
> + if (valid && depth)
> + flatten_lpi_states(pr, info, flpi, depth - 1);
> + }
> + return 0;
> +}
> +
> +static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
> +{
> + int ret, i;
> + struct acpi_processor_lpi_info *info;
> + struct acpi_device *d = NULL;
> + acpi_handle handle = pr->handle, phandle;
> + acpi_status status;
> +
> + if (!osc_pc_lpi_support_acked)
> + return -EOPNOTSUPP;
> +
> + max_leaf_depth = 0;
> + if (!acpi_has_method(handle, "_LPI"))
> + return -EINVAL;
> + fl_scnt = 0;
> +
> + while (ACPI_SUCCESS(status = acpi_get_parent(handle, &phandle))) {
> + if (!acpi_has_method(handle, "_LPI"))
> + continue;
> + acpi_bus_get_device(handle, &d);
> + if (!strcmp(acpi_device_hid(d), ACPI_PROCESSOR_CONTAINER_HID))
> + break;
> + max_leaf_depth++;
> + handle = phandle;
> + }
> +
> + info = kcalloc(max_leaf_depth + 1, sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + phandle = pr->handle;
phandle is easily confised with DT phandles. I'd avoind using that for an ACPI
object handle variable name.
> + for (i = max_leaf_depth; i >= 0 && ACPI_SUCCESS(status); i--) {
> + handle = phandle;
> + ret = acpi_processor_evaluate_lpi(handle, info + i);
> + if (ret)
> + break;
> + status = acpi_get_parent(handle, &phandle);
> + }
> +
> + /* flatten all the LPI states in the entire hierarchy */
> + flatten_lpi_states(pr, info, NULL, max_leaf_depth);
> +
> + pr->power.count = fl_scnt;
> + for (i = 0; i <= max_leaf_depth; i++)
> + kfree(info[i].lpix);
> + kfree(info);
> +
> + /* Tell driver that _LPI is supported. */
> + pr->flags.has_lpi = 1;
> + pr->flags.power = 1;
> +
> + return 0;
> +}
> +
> +/**
> + * acpi_idle_lpi_enter - enters an ACPI any LPI state
> + * @dev: the target CPU
> + * @drv: cpuidle driver containing cpuidle state info
> + * @index: index of target state
> + *
> + * Return: 0 for success or negative value for error
> + */
> +static int acpi_idle_lpi_enter(struct cpuidle_device *dev,
> + struct cpuidle_driver *drv, int index)
> {
> + struct acpi_processor *pr;
> + struct acpi_processor_lpi *lpi;
> +
> + pr = __this_cpu_read(processors);
> +
> + if (unlikely(!pr))
> + return -EINVAL;
> +
> + lpi = &pr->power.lpi_states[index];
> + if (lpi->entry_method == ACPI_CSTATE_FFH)
> + /* Call into architectural FFH based C-state */
> + return acpi_processor_ffh_lpi_enter(lpi, index);
> return -EINVAL;
> }
>
> +static int acpi_processor_setup_lpi_states(struct acpi_processor *pr)
> +{
> + int i;
> + struct acpi_processor_lpi *lpi;
> + struct cpuidle_state *state;
> + struct cpuidle_driver *drv = &acpi_idle_driver;
> +
> + for (i = 0; i < fl_scnt && i < CPUIDLE_STATE_MAX; i++) {
> + lpi = &pr->power.lpi_states[i];
> +
> + state = &drv->states[i];
> + snprintf(state->name, CPUIDLE_NAME_LEN, "LPI-%d", i);
> + strlcpy(state->desc, lpi->desc, CPUIDLE_DESC_LEN);
> + state->exit_latency = lpi->wake_latency;
> + state->target_residency = lpi->min_residency;
> + if (lpi->arch_flags)
> + state->flags |= CPUIDLE_FLAG_TIMER_STOP;
> + state->enter = acpi_idle_lpi_enter;
> + drv->safe_state_index = i;
> + }
> +
> + drv->state_count = i;
> +
> + return 0;
> +}
> +
> +#else
> +static int acpi_processor_ffh_lpi_probe(unsigned int cpu) { return -ENODEV; }
> +static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
> +{
> + return -ENODEV;
> +}
> +
> +static int acpi_processor_setup_lpi_states(struct acpi_processor *pr)
> +{
> + return -EINVAL;
> +}
> #endif
>
> +/**
> + * acpi_processor_setup_cpuidle_states- prepares and configures cpuidle
> + * global state data i.e. idle routines
> + *
> + * @pr: the ACPI processor
> + */
> +static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
> +{
> + int i;
> + struct cpuidle_driver *drv = &acpi_idle_driver;
> +
> + if (!pr->flags.power_setup_done)
> + return -EINVAL;
> +
> + if (pr->flags.power == 0)
> + return -EINVAL;
> +
> + drv->safe_state_index = -1;
> + for (i = CPUIDLE_DRIVER_STATE_START; i < CPUIDLE_STATE_MAX; i++) {
> + drv->states[i].name[0] = '\0';
> + drv->states[i].desc[0] = '\0';
> + }
> +
> + if (pr->flags.has_lpi)
> + return acpi_processor_setup_lpi_states(pr);
> + return acpi_processor_setup_cstates(pr);
Well, what if it turns out that LPI is missing? Shouldn't we fall back to using
_CST then?
Of course, the problem here is that the presence of LPI has to be checked for
all CPUs in the system before deciding to fall back (in which case all of them
should be using _CST if present).
> +}
> +
> +/**
> + * acpi_processor_setup_cpuidle_dev - prepares and configures CPUIDLE
> + * device i.e. per-cpu data
> + *
> + * @pr: the ACPI processor
> + * @dev : the cpuidle device
> + */
> +static int acpi_processor_setup_cpuidle_dev(struct acpi_processor *pr,
> + struct cpuidle_device *dev)
> +{
> + if (!pr->flags.power_setup_done)
> + return -EINVAL;
> +
> + if (pr->flags.power == 0)
> + return -EINVAL;
> +
> + if (!dev)
> + return -EINVAL;
> +
> + dev->cpu = pr->id;
> + if (pr->flags.has_lpi)
> + return acpi_processor_ffh_lpi_probe(pr->id);
> + else
> + return acpi_processor_setup_cpuidle_cx(pr, dev);
Fallback here too maybe?
> +}
> +
> +static int acpi_processor_get_power_info(struct acpi_processor *pr)
> +{
> + int ret = 0;
> +
> + ret = acpi_processor_get_cstate_info(pr);
> + if (ret)
> + ret = acpi_processor_get_lpi_info(pr);
Shouldn't that be done in the reverse order?
> + return ret;
> +}
> +
> int acpi_processor_hotplug(struct acpi_processor *pr)
> {
> int ret = 0;
> @@ -980,7 +1326,7 @@ int acpi_processor_hotplug(struct acpi_processor *pr)
> cpuidle_disable_device(dev);
> acpi_processor_get_power_info(pr);
> if (pr->flags.power) {
> - acpi_processor_setup_cpuidle_cx(pr, dev);
> + acpi_processor_setup_cpuidle_dev(pr, dev);
> ret = cpuidle_enable_device(dev);
> }
> cpuidle_resume_and_unlock();
> @@ -988,7 +1334,7 @@ int acpi_processor_hotplug(struct acpi_processor *pr)
> return ret;
> }
>
> -int acpi_processor_cst_has_changed(struct acpi_processor *pr)
> +int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
> {
> int cpu;
> struct acpi_processor *_pr;
> @@ -1036,7 +1382,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
> acpi_processor_get_power_info(_pr);
> if (_pr->flags.power) {
> dev = per_cpu(acpi_cpuidle_device, cpu);
> - acpi_processor_setup_cpuidle_cx(_pr, dev);
> + acpi_processor_setup_cpuidle_dev(_pr, dev);
> cpuidle_enable_device(dev);
> }
> }
> @@ -1093,7 +1439,7 @@ int acpi_processor_power_init(struct acpi_processor *pr)
> return -ENOMEM;
> per_cpu(acpi_cpuidle_device, pr->id) = dev;
>
> - acpi_processor_setup_cpuidle_cx(pr, dev);
> + acpi_processor_setup_cpuidle_dev(pr, dev);
>
> /* Register per-cpu cpuidle_device. Cpuidle driver
> * must already be registered before registering device
> diff --git a/include/acpi/processor.h b/include/acpi/processor.h
> index 50f2423d31fa..f3006831d427 100644
> --- a/include/acpi/processor.h
> +++ b/include/acpi/processor.h
> @@ -39,6 +39,7 @@
> #define ACPI_CSTATE_SYSTEMIO 0
> #define ACPI_CSTATE_FFH 1
> #define ACPI_CSTATE_HALT 2
> +#define ACPI_CSTATE_INTEGER 3
What does this mean?
>
> #define ACPI_CX_DESC_LEN 32
>
> @@ -67,9 +68,25 @@ struct acpi_processor_cx {
> char desc[ACPI_CX_DESC_LEN];
> };
>
> +struct acpi_processor_lpi {
> + u32 min_residency;
> + u32 wake_latency; /* worst case */
> + u32 flags;
> + u32 arch_flags;
> + u32 res_cnt_freq;
> + u32 enable_parent_state;
> + u64 address;
> + u8 index;
> + u8 entry_method;
> + char desc[ACPI_CX_DESC_LEN];
> +};
> +
> struct acpi_processor_power {
> int count;
> - struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
> + union {
> + struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
> + struct acpi_processor_lpi lpi_states[ACPI_PROCESSOR_MAX_POWER];
> + };
> int timer_broadcast_on_state;
> };
>
> @@ -189,6 +206,7 @@ struct acpi_processor_flags {
> u8 bm_control:1;
> u8 bm_check:1;
> u8 has_cst:1;
> + u8 has_lpi:1;
> u8 power_setup_done:1;
> u8 bm_rld_set:1;
> u8 need_hotplug_init:1;
> @@ -272,6 +290,11 @@ static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx
> }
> #endif
>
> +#ifdef CONFIG_ARCH_SUPPORTS_ACPI_PROCESSOR_LPI
> +int acpi_processor_ffh_lpi_probe(unsigned int cpu);
> +int acpi_processor_ffh_lpi_enter(struct acpi_processor_lpi *lpi, int idx);
> +#endif
> +
> /* in processor_perflib.c */
>
> #ifdef CONFIG_CPU_FREQ
> @@ -372,7 +395,7 @@ extern struct cpuidle_driver acpi_idle_driver;
> #ifdef CONFIG_ACPI_PROCESSOR_IDLE
> int acpi_processor_power_init(struct acpi_processor *pr);
> int acpi_processor_power_exit(struct acpi_processor *pr);
> -int acpi_processor_cst_has_changed(struct acpi_processor *pr);
> +int acpi_processor_power_state_has_changed(struct acpi_processor *pr);
> int acpi_processor_hotplug(struct acpi_processor *pr);
> #else
> static inline int acpi_processor_power_init(struct acpi_processor *pr)
> @@ -385,7 +408,8 @@ static inline int acpi_processor_power_exit(struct acpi_processor *pr)
> return -ENODEV;
> }
>
> -static inline int acpi_processor_cst_has_changed(struct acpi_processor *pr)
> +static inline int
> +acpi_processor_power_state_has_changed(struct acpi_processor *pr)
> {
> return -ENODEV;
> }
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 054833939995..962a63b266cc 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -380,8 +380,12 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context);
> #define OSC_SB_HOTPLUG_OST_SUPPORT 0x00000008
> #define OSC_SB_APEI_SUPPORT 0x00000010
> #define OSC_SB_CPC_SUPPORT 0x00000020
> +#define OSC_SB_CPCV2_SUPPORT 0x00000040
> +#define OSC_SB_PCLPI_SUPPORT 0x00000080
> +#define OSC_SB_OSLPI_SUPPORT 0x00000100
>
> extern bool osc_sb_apei_support_acked;
> +extern bool osc_pc_lpi_support_acked;
>
> /* PCI Host Bridge _OSC: Capabilities DWORD 2: Support Field */
> #define OSC_PCI_EXT_CONFIG_SUPPORT 0x00000001
>
Thanks,
Rafael