[PATCH v2] pinctrl: sh-pfc: Rework PFC GPIO support
From: Magnus Damm
Date: Wed Feb 17 2016 - 03:13:08 EST
From: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>
The sh-pfc pinctrl driver is currently handling SoC-specific
PFC hardware blocks on ARM64, ARM and SH architectures.
For older SoCs using SH cores and some 32-bit ARM SoCs the PFC
hardware also provides GPIO functionality. On the majority of
32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO
feature is provided by separate hardware blocks.
So far GPIO support in the PFC driver has been compiled-in for
the majority of the SoCs, but with this patch applied the SoCs
with PFC support may select from one of the following:
- CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware
- CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support
This patch results in the following changes:
- The GPIO functionality is only compiled-in on relevant SoCs
- The number of lines of code is reduced
Build tested using the following configurations:
- r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64)
- r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM)
- r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM)
- r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM)
- sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1)
- sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24)
Signed-off-by: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>
---
Changes since V1:
- Simplied Makefile bits to remove sh-pfc-objs and use new Kconfig symbol
drivers/pinctrl/sh-pfc/Kconfig | 54 ++++++++++++++-------------------------
drivers/pinctrl/sh-pfc/Makefile | 7 +----
drivers/pinctrl/sh-pfc/core.c | 4 +-
3 files changed, 24 insertions(+), 41 deletions(-)
--- 0001/drivers/pinctrl/sh-pfc/Kconfig
+++ work/drivers/pinctrl/sh-pfc/Kconfig 2016-02-17 16:23:21.630513000 +0900
@@ -5,7 +5,6 @@
if ARCH_SHMOBILE || SUPERH
config PINCTRL_SH_PFC
- select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB
select PINMUX
select PINCONF
select GENERIC_PINCONF
@@ -13,12 +12,12 @@ config PINCTRL_SH_PFC
help
This enables pin control drivers for SH and SH Mobile platforms
-config GPIO_SH_PFC
- bool "SuperH PFC GPIO support"
- depends on PINCTRL_SH_PFC && GPIOLIB
+config PINCTRL_SH_PFC_GPIO
+ select GPIOLIB
+ select PINCTRL_SH_PFC
+ def_bool n
help
- This enables support for GPIOs within the SoC's pin function
- controller.
+ This enables pin control and GPIO drivers for SH/SH Mobile platforms
config PINCTRL_PFC_EMEV2
def_bool y
@@ -28,12 +27,12 @@ config PINCTRL_PFC_EMEV2
config PINCTRL_PFC_R8A73A4
def_bool y
depends on ARCH_R8A73A4
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_R8A7740
def_bool y
depends on ARCH_R8A7740
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_R8A7778
def_bool y
@@ -73,79 +72,66 @@ config PINCTRL_PFC_R8A7795
config PINCTRL_PFC_SH7203
def_bool y
depends on CPU_SUBTYPE_SH7203
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SH7264
def_bool y
depends on CPU_SUBTYPE_SH7264
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SH7269
def_bool y
depends on CPU_SUBTYPE_SH7269
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SH73A0
def_bool y
depends on ARCH_SH73A0
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
select REGULATOR
config PINCTRL_PFC_SH7720
def_bool y
depends on CPU_SUBTYPE_SH7720
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SH7722
def_bool y
depends on CPU_SUBTYPE_SH7722
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SH7723
def_bool y
depends on CPU_SUBTYPE_SH7723
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SH7724
def_bool y
depends on CPU_SUBTYPE_SH7724
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SH7734
def_bool y
depends on CPU_SUBTYPE_SH7734
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SH7757
def_bool y
depends on CPU_SUBTYPE_SH7757
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SH7785
def_bool y
depends on CPU_SUBTYPE_SH7785
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SH7786
def_bool y
depends on CPU_SUBTYPE_SH7786
- depends on GPIOLIB
- select PINCTRL_SH_PFC
+ select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_SHX3
def_bool y
depends on CPU_SUBTYPE_SHX3
- depends on GPIOLIB
- select PINCTRL_SH_PFC
-
+ select PINCTRL_SH_PFC_GPIO
endif
--- 0001/drivers/pinctrl/sh-pfc/Makefile
+++ work/drivers/pinctrl/sh-pfc/Makefile 2016-02-17 16:26:18.660513000 +0900
@@ -1,8 +1,5 @@
-sh-pfc-objs = core.o pinctrl.o
-ifeq ($(CONFIG_GPIO_SH_PFC),y)
-sh-pfc-objs += gpio.o
-endif
-obj-$(CONFIG_PINCTRL_SH_PFC) += sh-pfc.o
+obj-$(CONFIG_PINCTRL_SH_PFC) += core.o pinctrl.o
+obj-$(CONFIG_PINCTRL_SH_PFC_GPIO) += gpio.o
obj-$(CONFIG_PINCTRL_PFC_EMEV2) += pfc-emev2.o
obj-$(CONFIG_PINCTRL_PFC_R8A73A4) += pfc-r8a73a4.o
obj-$(CONFIG_PINCTRL_PFC_R8A7740) += pfc-r8a7740.o
--- 0001/drivers/pinctrl/sh-pfc/core.c
+++ work/drivers/pinctrl/sh-pfc/core.c 2016-02-17 16:23:21.640513000 +0900
@@ -558,7 +558,7 @@ static int sh_pfc_probe(struct platform_
if (unlikely(ret != 0))
return ret;
-#ifdef CONFIG_GPIO_SH_PFC
+#ifdef CONFIG_PINCTRL_SH_PFC_GPIO
/*
* Then the GPIO chip
*/
@@ -584,7 +584,7 @@ static int sh_pfc_remove(struct platform
{
struct sh_pfc *pfc = platform_get_drvdata(pdev);
-#ifdef CONFIG_GPIO_SH_PFC
+#ifdef CONFIG_PINCTRL_SH_PFC_GPIO
sh_pfc_unregister_gpiochip(pfc);
#endif
sh_pfc_unregister_pinctrl(pfc);