Re: [PATCH] mfd: Add support for COMe-cSL6 and COMe-mAL10 to Kontron PLD driver

[Guenter Roeck]

On 02/17/2016 05:45 AM, Michael Brunner wrote:
> This patch adds the DMI system ID of the Kontron COMe-cSL6 and
> COME-mAL10 boards to the Kontron PLD driver. The list of supported
> products in the module description is also updated.
>
> Signed-off-by: Michael Brunner <michael.brunner@xxxxxxxxxxx>
> Acked-by: Christian Rauch <christian.rauch@xxxxxxxxxxx>

Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>

> ---
>   drivers/mfd/Kconfig       |  2 ++
>   drivers/mfd/kempld-core.c | 16 ++++++++++++++++
>   2 files changed, 18 insertions(+)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..aab58b6 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -435,6 +435,8 @@ config MFD_KEMPLD
>   		* COMe-cDC2 (microETXexpress-DC)
>   		* COMe-cHL6
>   		* COMe-cPC2 (microETXexpress-PC)
> +		* COMe-cSL6
> +		* COMe-mAL10
>   		* COMe-mBT10
>   		* COMe-mCT10
>   		* COMe-mTT10 (nanoETXexpress-TT)
> diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
> index 05b9245..da5722d 100644
> --- a/drivers/mfd/kempld-core.c
> +++ b/drivers/mfd/kempld-core.c
> @@ -624,6 +624,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
>   		.driver_data = (void *)&kempld_platform_data_generic,
>   		.callback = kempld_create_platform_device,
>   	}, {
> +		.ident = "CSL6",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> +			DMI_MATCH(DMI_BOARD_NAME, "COMe-cSL6"),
> +		},
> +		.driver_data = (void *)&kempld_platform_data_generic,
> +		.callback = kempld_create_platform_device,
> +	}, {
>   		.ident = "CVV6",
>   		.matches = {
>   			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> @@ -647,6 +655,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
>   		.driver_data = (void *)&kempld_platform_data_generic,
>   		.callback = kempld_create_platform_device,
>   	}, {
> +		.ident = "MAL1",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> +			DMI_MATCH(DMI_BOARD_NAME, "COMe-mAL10"),
> +		},
> +		.driver_data = (void *)&kempld_platform_data_generic,
> +		.callback = kempld_create_platform_device,
> +	}, {
>   		.ident = "MBR1",
>   		.matches = {
>   			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),