Re: [PATCH v4] iio: adc: Add TI ADS1015 ADC driver support

[Michael Welling]

On Wed, Feb 10, 2016 at 10:36:22AM -0600, Michael Welling wrote:
> On Wed, Feb 10, 2016 at 08:39:04PM +0530, Sricharan wrote:
> > > Hi Sricharan,
> > > 
> > > Are you looking at pca9685_pwm_probe in drivers/pwm/pwm-pca9685.c
> > > right?
> > >
> >  Yes.
> >  
> > > I'm asking this because this driver doesn't seem to support runtime pm and
> > > there is no check for regmap_write/regmap_write return code in the probe
> > > function.
> >    Hmm to be clear, so itâs the pm_runtime_getsync from i2c-qup which fails right ?
> >    I was tracking that when there are i2c_xfers from pwm. I did not see any failures there.
> >    So wanted to know the correct sequence to reproduce.
> >
> 
> The problem was discovered using the patch that this thread is on. The PWM driver does
> not have the problem.
> 
> When the driver in this patch called pm_runtime_get_sync you got -EINVAL back.

I noticed some patches for the QUP I2C driver in linux-next so I built against it.

The ADC driver now appears to work as desired.

root@dragonboard-410c:~# cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw 
287
root@dragonboard-410c:~# cat /sys/bus/iio/devices/iio\:device0/in_voltage1_raw 
269
root@dragonboard-410c:~# cat /sys/bus/iio/devices/iio\:device0/in_voltage2_raw 
270
root@dragonboard-410c:~# cat /sys/bus/iio/devices/iio\:device0/in_voltage3_raw 
271

> 
> > Regards,
> >   Sricharan
> >   
> > 
> >