[PATCH v2 5/7] T104xD4RDB: Add qe node to t104xd4rdb

From: Zhao Qiang
Date: Wed Feb 17 2016 - 20:30:27 EST


add qe node to t104xd4rdb.dtsi and t1040si-post.dtsi.

Signed-off-by: Zhao Qiang <qiang.zhao@xxxxxxx>
---
Changes for v2
- rebase

arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 45 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi | 40 +++++++++++++++++++++++++
2 files changed, 85 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index e0f4da5..012f813 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -673,3 +673,48 @@
};
};
};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
index 3f6d7c6..2e24322 100644
--- a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
@@ -212,4 +212,44 @@
0 0x00010000>;
};
};
+
+ qe: qe@ffe140000 {
+ ranges = <0x0 0xf 0xfe140000 0x40000>;
+ reg = <0xf 0xfe140000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+
+ si1: si@700 {
+ compatible = "fsl,qe-si";
+ reg = <0x700 0x80>;
+ };
+
+ siram1: siram@1000 {
+ compatible = "fsl,qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
+ ucc_hdlc: ucc@2000 {
+ compatible = "fsl,ucc-hdlc";
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot = <0xfffffffe>;
+ fsl,rx-timeslot = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-mode = "normal";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
+
+ ucc_serial: ucc@2200 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ port-number = <1>;
+ rx-clock-name = "brg2";
+ tx-clock-name = "brg2";
+ };
+ };
};
--
2.1.0.27.g96db324