Re: [RFC v5 07/15] usb: ehci: add vbus-gpio parameter

[Alan Stern]

On Tue, 9 Feb 2016, Antony Pavlov wrote:

> This patch retrieves and configures the vbus control gpio via
> the device tree.
> 
> This patch is based on a ehci-s5p.c commit fd81d59c90d38661
> ("USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer").
> 
> Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx>
> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: linux-usb@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> ---
>  drivers/usb/host/ehci-platform.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
> index bd7082f2..0d95ced 100644
> --- a/drivers/usb/host/ehci-platform.c
> +++ b/drivers/usb/host/ehci-platform.c
> @@ -28,6 +28,7 @@
>  #include <linux/io.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_gpio.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
>  #include <linux/reset.h>
> @@ -142,6 +143,25 @@ static struct usb_ehci_pdata ehci_platform_defaults = {
>  	.power_off =		ehci_platform_power_off,
>  };
>  
> +static void setup_vbus_gpio(struct device *dev)
> +{
> +	int err;
> +	int gpio;
> +
> +	if (!dev->of_node)
> +		return;
> +
> +	gpio = of_get_named_gpio(dev->of_node, "vbus-gpio", 0);
> +	if (!gpio_is_valid(gpio))
> +		return;
> +
> +	err = devm_gpio_request_one(dev, gpio,
> +				GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
> +				"ehci_vbus_gpio");
> +	if (err)
> +		dev_err(dev, "can't request ehci vbus gpio %d", gpio);

I don't understand this.  If you get an error here, what's the point of 
allowing the probe to continue?  Shouldn't you return an error code so 
the probe will fail?

Alan Stern

> +}
> +
>  static int ehci_platform_probe(struct platform_device *dev)
>  {
>  	struct usb_hcd *hcd;
> @@ -174,6 +194,8 @@ static int ehci_platform_probe(struct platform_device *dev)
>  		return irq;
>  	}
>  
> +	setup_vbus_gpio(&dev->dev);
> +
>  	hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
>  			     dev_name(&dev->dev));
>  	if (!hcd)
>