[tip:mm/pkeys] x86/fpu: Allow setting of XSAVE state

[tip-bot for Dave Hansen]

Commit-ID:  b8b9b6ba9dec3f155c7555cb208ba4078e97aedb
Gitweb:     http://git.kernel.org/tip/b8b9b6ba9dec3f155c7555cb208ba4078e97aedb
Author:     Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
AuthorDate: Fri, 12 Feb 2016 13:02:35 -0800
Committer:  Ingo Molnar <mingo@xxxxxxxxxx>
CommitDate: Thu, 18 Feb 2016 19:46:32 +0100

x86/fpu: Allow setting of XSAVE state

We want to modify the Protection Key rights inside the kernel, so
we need to change PKRU's contents.  But, if we do a plain
'wrpkru', when we return to userspace we might do an XRSTOR and
wipe out the kernel's 'wrpkru'.  So, we need to go after PKRU in
the xsave buffer.

We do this by:

  1. Ensuring that we have the XSAVE registers (fpregs) in the
     kernel FPU buffer (fpstate)
  2. Looking up the location of a given state in the buffer
  3. Filling in the stat
  4. Ensuring that the hardware knows that state is present there
     (basically that the 'init optimization' is not in place).
  5. Copying the newly-modified state back to the registers if
     necessary.

Signed-off-by: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Reviewed-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Brian Gerst <brgerst@xxxxxxxxx>
Cc: Dave Hansen <dave@xxxxxxxx>
Cc: Denys Vlasenko <dvlasenk@xxxxxxxxxx>
Cc: Fenghua Yu <fenghua.yu@xxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Oleg Nesterov <oleg@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Quentin Casasnovas <quentin.casasnovas@xxxxxxxxxx>
Cc: Rik van Riel <riel@xxxxxxxxxx>
Cc: linux-mm@xxxxxxxxx
Link: http://lkml.kernel.org/r/20160212210235.5A3139BF@xxxxxxxxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
 arch/x86/include/asm/fpu/internal.h |  2 +
 arch/x86/kernel/fpu/core.c          | 63 ++++++++++++++++++++++++
 arch/x86/kernel/fpu/xstate.c        | 98 ++++++++++++++++++++++++++++++++++++-
 3 files changed, 161 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index a212434..31ac8e6 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -25,6 +25,8 @@
 extern void fpu__activate_curr(struct fpu *fpu);
 extern void fpu__activate_fpstate_read(struct fpu *fpu);
 extern void fpu__activate_fpstate_write(struct fpu *fpu);
+extern void fpu__current_fpstate_write_begin(void);
+extern void fpu__current_fpstate_write_end(void);
 extern void fpu__save(struct fpu *fpu);
 extern void fpu__restore(struct fpu *fpu);
 extern int  fpu__restore_sig(void __user *buf, int ia32_frame);
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 299b58b..dea8e76 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -354,6 +354,69 @@ void fpu__activate_fpstate_write(struct fpu *fpu)
 }
 
 /*
+ * This function must be called before we write the current
+ * task's fpstate.
+ *
+ * This call gets the current FPU register state and moves
+ * it in to the 'fpstate'.  Preemption is disabled so that
+ * no writes to the 'fpstate' can occur from context
+ * swiches.
+ *
+ * Must be followed by a fpu__current_fpstate_write_end().
+ */
+void fpu__current_fpstate_write_begin(void)
+{
+	struct fpu *fpu = &current->thread.fpu;
+
+	/*
+	 * Ensure that the context-switching code does not write
+	 * over the fpstate while we are doing our update.
+	 */
+	preempt_disable();
+
+	/*
+	 * Move the fpregs in to the fpu's 'fpstate'.
+	 */
+	fpu__activate_fpstate_read(fpu);
+
+	/*
+	 * The caller is about to write to 'fpu'.  Ensure that no
+	 * CPU thinks that its fpregs match the fpstate.  This
+	 * ensures we will not be lazy and skip a XRSTOR in the
+	 * future.
+	 */
+	fpu->last_cpu = -1;
+}
+
+/*
+ * This function must be paired with fpu__current_fpstate_write_begin()
+ *
+ * This will ensure that the modified fpstate gets placed back in
+ * the fpregs if necessary.
+ *
+ * Note: This function may be called whether or not an _actual_
+ * write to the fpstate occurred.
+ */
+void fpu__current_fpstate_write_end(void)
+{
+	struct fpu *fpu = &current->thread.fpu;
+
+	/*
+	 * 'fpu' now has an updated copy of the state, but the
+	 * registers may still be out of date.  Update them with
+	 * an XRSTOR if they are active.
+	 */
+	if (fpregs_active())
+		copy_kernel_to_fpregs(&fpu->state);
+
+	/*
+	 * Our update is done and the fpregs/fpstate are in sync
+	 * if necessary.  Context switches can happen again.
+	 */
+	preempt_enable();
+}
+
+/*
  * 'fpu__restore()' is called to copy FPU registers from
  * the FPU fpstate to the live hw registers and to activate
  * access to the hardware registers, so that FPU instructions
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index a63ca80..30d144f 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -679,6 +679,19 @@ void fpu__resume_cpu(void)
 }
 
 /*
+ * Given an xstate feature mask, calculate where in the xsave
+ * buffer the state is.  Callers should ensure that the buffer
+ * is valid.
+ *
+ * Note: does not work for compacted buffers.
+ */
+void *__raw_xsave_addr(struct xregs_state *xsave, int xstate_feature_mask)
+{
+	int feature_nr = fls64(xstate_feature_mask) - 1;
+
+	return (void *)xsave + xstate_comp_offsets[feature_nr];
+}
+/*
  * Given the xsave area and a state inside, this function returns the
  * address of the state.
  *
@@ -698,7 +711,6 @@ void fpu__resume_cpu(void)
  */
 void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
 {
-	int feature_nr = fls64(xstate_feature) - 1;
 	/*
 	 * Do we even *have* xsave state?
 	 */
@@ -726,7 +738,7 @@ void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
 	if (!(xsave->header.xfeatures & xstate_feature))
 		return NULL;
 
-	return (void *)xsave + xstate_comp_offsets[feature_nr];
+	return __raw_xsave_addr(xsave, xstate_feature);
 }
 EXPORT_SYMBOL_GPL(get_xsave_addr);
 
@@ -761,3 +773,85 @@ const void *get_xsave_field_ptr(int xsave_state)
 
 	return get_xsave_addr(&fpu->state.xsave, xsave_state);
 }
+
+
+/*
+ * Set xfeatures (aka XSTATE_BV) bit for a feature that we want
+ * to take out of its "init state".  This will ensure that an
+ * XRSTOR actually restores the state.
+ */
+static void fpu__xfeature_set_non_init(struct xregs_state *xsave,
+		int xstate_feature_mask)
+{
+	xsave->header.xfeatures |= xstate_feature_mask;
+}
+
+/*
+ * This function is safe to call whether the FPU is in use or not.
+ *
+ * Note that this only works on the current task.
+ *
+ * Inputs:
+ *	@xsave_state: state which is defined in xsave.h (e.g. XFEATURE_MASK_FP,
+ *	XFEATURE_MASK_SSE, etc...)
+ *	@xsave_state_ptr: a pointer to a copy of the state that you would
+ *	like written in to the current task's FPU xsave state.  This pointer
+ *	must not be located in the current tasks's xsave area.
+ * Output:
+ *	address of the state in the xsave area or NULL if the state
+ *	is not present or is in its 'init state'.
+ */
+static void fpu__xfeature_set_state(int xstate_feature_mask,
+		void *xstate_feature_src, size_t len)
+{
+	struct xregs_state *xsave = &current->thread.fpu.state.xsave;
+	struct fpu *fpu = &current->thread.fpu;
+	void *dst;
+
+	if (!boot_cpu_has(X86_FEATURE_XSAVE)) {
+		WARN_ONCE(1, "%s() attempted with no xsave support", __func__);
+		return;
+	}
+
+	/*
+	 * Tell the FPU code that we need the FPU state to be in
+	 * 'fpu' (not in the registers), and that we need it to
+	 * be stable while we write to it.
+	 */
+	fpu__current_fpstate_write_begin();
+
+	/*
+	 * This method *WILL* *NOT* work for compact-format
+	 * buffers.  If the 'xstate_feature_mask' is unset in
+	 * xcomp_bv then we may need to move other feature state
+	 * "up" in the buffer.
+	 */
+	if (xsave->header.xcomp_bv & xstate_feature_mask) {
+		WARN_ON_ONCE(1);
+		goto out;
+	}
+
+	/* find the location in the xsave buffer of the desired state */
+	dst = __raw_xsave_addr(&fpu->state.xsave, xstate_feature_mask);
+
+	/*
+	 * Make sure that the pointer being passed in did not
+	 * come from the xsave buffer itself.
+	 */
+	WARN_ONCE(xstate_feature_src == dst, "set from xsave buffer itself");
+
+	/* put the caller-provided data in the location */
+	memcpy(dst, xstate_feature_src, len);
+
+	/*
+	 * Mark the xfeature so that the CPU knows there is state
+	 * in the buffer now.
+	 */
+	fpu__xfeature_set_non_init(xsave, xstate_feature_mask);
+out:
+	/*
+	 * We are done writing to the 'fpu'.  Reenable preeption
+	 * and (possibly) move the fpstate back in to the fpregs.
+	 */
+	fpu__current_fpstate_write_end();
+}