RE: [PATCH] dmaengine: xilinx_vdma: Fix issues with non-parking mode
From: Appana Durga Kedareswara Rao
Date: Mon Feb 22 2016 - 00:01:42 EST
Hi Vinod,
> -----Original Message-----
> From: Vinod Koul [mailto:vinod.koul@xxxxxxxxx]
> Sent: Monday, February 22, 2016 10:17 AM
> To: Appana Durga Kedareswara Rao
> Cc: dan.j.williams@xxxxxxxxx; Michal Simek; Soren Brinkmann; Appana Durga
> Kedareswara Rao; moritz.fischer@xxxxxxxxx;
> laurent.pinchart@xxxxxxxxxxxxxxxx; luis@xxxxxxxxxxxxxxxxx; Anirudha
> Sarangi; dmaengine@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH] dmaengine: xilinx_vdma: Fix issues with non-parking mode
>
> On Tue, Feb 16, 2016 at 02:59:06PM +0530, Kedareswara rao Appana wrote:
> > This patch fixes issues with the Non-parking mode(Cirular mode).
> > With the existing driver in cirular mode if we submit frames less
> > than h/w configured we simply end-up having misconfigured vdma h/w.
> > This patch fixes this issue by
> > ----> By queing multiple descripotrs.
> > ----> By configuring the frame count register.
>
> And quick look seems like too many changes in one patch.
Ok will split into multiple patches.
>
> >
> > Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>
> > ---
> > drivers/dma/xilinx/xilinx_vdma.c | 193
> > ++++++++++++++++++---------------------
> > 1 file changed, 91 insertions(+), 102 deletions(-)
> >
> > diff --git a/drivers/dma/xilinx/xilinx_vdma.c
> > b/drivers/dma/xilinx/xilinx_vdma.c
> > index 6f4b501..a73c8e1 100644
> > --- a/drivers/dma/xilinx/xilinx_vdma.c
> > +++ b/drivers/dma/xilinx/xilinx_vdma.c
> > @@ -190,8 +190,7 @@ struct xilinx_vdma_tx_descriptor {
> > * @desc_offset: TX descriptor registers offset
> > * @lock: Descriptor operation lock
> > * @pending_list: Descriptors waiting
> > - * @active_desc: Active descriptor
> > - * @allocated_desc: Allocated descriptor
> > + * @active_list: Descriptors ready to submit
>
> Which should probably be a separate patch describing why list management is
> changed?
Sure.
>
> So can you please split up with right changelogs and resend
Ok will split into multiple patches and will resend.
Thanks,
Kedar.
>
> Thanks
> --
> ~Vinod
>
> > * @done_list: Complete descriptors
> > * @common: DMA common channel
> > * @desc_pool: Descriptors pool
> > @@ -203,9 +202,11 @@ struct xilinx_vdma_tx_descriptor {
> > * @has_sg: Support scatter transfers
> > * @genlock: Support genlock mode
> > * @err: Channel has errors
> > + * @idle: Check for channel idle
> > * @tasklet: Cleanup work after irq
> > * @config: Device configuration info
> > * @flush_on_fsync: Flush on Frame sync
> > + * @desc_pendingcount: Descriptor pending count
> > */
> > struct xilinx_vdma_chan {
> > struct xilinx_vdma_device *xdev;
> > @@ -213,8 +214,7 @@ struct xilinx_vdma_chan {
> > u32 desc_offset;
> > spinlock_t lock;
> > struct list_head pending_list;
> > - struct xilinx_vdma_tx_descriptor *active_desc;
> > - struct xilinx_vdma_tx_descriptor *allocated_desc;
> > + struct list_head active_list;
> > struct list_head done_list;
> > struct dma_chan common;
> > struct dma_pool *desc_pool;
> > @@ -226,9 +226,11 @@ struct xilinx_vdma_chan {
> > bool has_sg;
> > bool genlock;
> > bool err;
> > + bool idle;
> > struct tasklet_struct tasklet;
> > struct xilinx_vdma_config config;
> > bool flush_on_fsync;
> > + u32 desc_pendingcount;
> > };
> >
> > /**
> > @@ -342,19 +344,11 @@ static struct xilinx_vdma_tx_descriptor *
> > xilinx_vdma_alloc_tx_descriptor(struct xilinx_vdma_chan *chan) {
> > struct xilinx_vdma_tx_descriptor *desc;
> > - unsigned long flags;
> > -
> > - if (chan->allocated_desc)
> > - return chan->allocated_desc;
> >
> > desc = kzalloc(sizeof(*desc), GFP_KERNEL);
> > if (!desc)
> > return NULL;
> >
> > - spin_lock_irqsave(&chan->lock, flags);
> > - chan->allocated_desc = desc;
> > - spin_unlock_irqrestore(&chan->lock, flags);
> > -
> > INIT_LIST_HEAD(&desc->segments);
> >
> > return desc;
> > @@ -412,9 +406,7 @@ static void xilinx_vdma_free_descriptors(struct
> > xilinx_vdma_chan *chan)
> >
> > xilinx_vdma_free_desc_list(chan, &chan->pending_list);
> > xilinx_vdma_free_desc_list(chan, &chan->done_list);
> > -
> > - xilinx_vdma_free_tx_descriptor(chan, chan->active_desc);
> > - chan->active_desc = NULL;
> > + xilinx_vdma_free_desc_list(chan, &chan->active_list);
> >
> > spin_unlock_irqrestore(&chan->lock, flags); } @@ -529,32 +521,6 @@
> > static enum dma_status xilinx_vdma_tx_status(struct dma_chan *dchan,
> > }
> >
> > /**
> > - * xilinx_vdma_is_running - Check if VDMA channel is running
> > - * @chan: Driver specific VDMA channel
> > - *
> > - * Return: '1' if running, '0' if not.
> > - */
> > -static bool xilinx_vdma_is_running(struct xilinx_vdma_chan *chan) -{
> > - return !(vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) &
> > - XILINX_VDMA_DMASR_HALTED) &&
> > - (vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR) &
> > - XILINX_VDMA_DMACR_RUNSTOP);
> > -}
> > -
> > -/**
> > - * xilinx_vdma_is_idle - Check if VDMA channel is idle
> > - * @chan: Driver specific VDMA channel
> > - *
> > - * Return: '1' if idle, '0' if not.
> > - */
> > -static bool xilinx_vdma_is_idle(struct xilinx_vdma_chan *chan) -{
> > - return vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) &
> > - XILINX_VDMA_DMASR_IDLE;
> > -}
> > -
> > -/**
> > * xilinx_vdma_halt - Halt VDMA channel
> > * @chan: Driver specific VDMA channel
> > */
> > @@ -614,45 +580,34 @@ static void xilinx_vdma_start(struct
> > xilinx_vdma_chan *chan) static void xilinx_vdma_start_transfer(struct
> > xilinx_vdma_chan *chan) {
> > struct xilinx_vdma_config *config = &chan->config;
> > - struct xilinx_vdma_tx_descriptor *desc;
> > - unsigned long flags;
> > + struct xilinx_vdma_tx_descriptor *desc, *tail_desc;
> > u32 reg;
> > - struct xilinx_vdma_tx_segment *head, *tail = NULL;
> > + struct xilinx_vdma_tx_segment *tail_segment;
> >
> > if (chan->err)
> > return;
> >
> > - spin_lock_irqsave(&chan->lock, flags);
> > -
> > - /* There's already an active descriptor, bail out. */
> > - if (chan->active_desc)
> > - goto out_unlock;
> > -
> > if (list_empty(&chan->pending_list))
> > - goto out_unlock;
> > + return;
> > +
> > + if (!chan->idle)
> > + return;
> >
> > desc = list_first_entry(&chan->pending_list,
> > struct xilinx_vdma_tx_descriptor, node);
> > + tail_desc = list_last_entry(&chan->pending_list,
> > + struct xilinx_vdma_tx_descriptor, node);
> >
> > - /* If it is SG mode and hardware is busy, cannot submit */
> > - if (chan->has_sg && xilinx_vdma_is_running(chan) &&
> > - !xilinx_vdma_is_idle(chan)) {
> > - dev_dbg(chan->dev, "DMA controller still busy\n");
> > - goto out_unlock;
> > - }
> > + tail_segment = list_last_entry(&tail_desc->segments,
> > + struct xilinx_vdma_tx_segment, node);
> >
> > /*
> > * If hardware is idle, then all descriptors on the running lists are
> > * done, start new transfers
> > */
> > - if (chan->has_sg) {
> > - head = list_first_entry(&desc->segments,
> > - struct xilinx_vdma_tx_segment, node);
> > - tail = list_entry(desc->segments.prev,
> > - struct xilinx_vdma_tx_segment, node);
> > -
> > - vdma_ctrl_write(chan, XILINX_VDMA_REG_CURDESC, head-
> >phys);
> > - }
> > + if (chan->has_sg)
> > + vdma_ctrl_write(chan, XILINX_VDMA_REG_CURDESC,
> > + desc->async_tx.phys);
> >
> > /* Configure the hardware using info in the config structure */
> > reg = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR); @@ -662,6
> +617,9
> > @@ static void xilinx_vdma_start_transfer(struct xilinx_vdma_chan *chan)
> > else
> > reg &= ~XILINX_VDMA_DMACR_FRAMECNT_EN;
> >
> > + vdma_ctrl_write(chan, XILINX_VDMA_REG_FRMSTORE,
> > + chan->desc_pendingcount);
> > +
> > /*
> > * With SG, start with circular mode, so that BDs can be fetched.
> > * In direct register mode, if not parking, enable circular mode @@
> > -690,16 +648,19 @@ static void xilinx_vdma_start_transfer(struct
> xilinx_vdma_chan *chan)
> > xilinx_vdma_start(chan);
> >
> > if (chan->err)
> > - goto out_unlock;
> > + return;
> >
> > /* Start the transfer */
> > if (chan->has_sg) {
> > - vdma_ctrl_write(chan, XILINX_VDMA_REG_TAILDESC, tail-
> >phys);
> > + vdma_ctrl_write(chan, XILINX_VDMA_REG_TAILDESC,
> > + tail_segment->phys);
> > } else {
> > struct xilinx_vdma_tx_segment *segment, *last = NULL;
> > int i = 0;
> >
> > - list_for_each_entry(segment, &desc->segments, node) {
> > + list_for_each_entry(desc, &chan->pending_list, node) {
> > + segment = list_first_entry(&desc->segments,
> > + struct xilinx_vdma_tx_segment,
> node);
> > vdma_desc_write(chan,
> >
> XILINX_VDMA_REG_START_ADDRESS(i++),
> > segment->hw.buf_addr);
> > @@ -707,7 +668,7 @@ static void xilinx_vdma_start_transfer(struct
> xilinx_vdma_chan *chan)
> > }
> >
> > if (!last)
> > - goto out_unlock;
> > + return;
> >
> > /* HW expects these parameters to be same for one
> transaction */
> > vdma_desc_write(chan, XILINX_VDMA_REG_HSIZE, last-
> >hw.hsize); @@
> > -716,11 +677,9 @@ static void xilinx_vdma_start_transfer(struct
> xilinx_vdma_chan *chan)
> > vdma_desc_write(chan, XILINX_VDMA_REG_VSIZE, last-
> >hw.vsize);
> > }
> >
> > - list_del(&desc->node);
> > - chan->active_desc = desc;
> > -
> > -out_unlock:
> > - spin_unlock_irqrestore(&chan->lock, flags);
> > + list_splice_tail_init(&chan->pending_list, &chan->active_list);
> > + chan->desc_pendingcount = 0;
> > + chan->idle = false;
> > }
> >
> > /**
> > @@ -730,8 +689,11 @@ out_unlock:
> > static void xilinx_vdma_issue_pending(struct dma_chan *dchan) {
> > struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan);
> > + unsigned long flags;
> >
> > + spin_lock_irqsave(&chan->lock, flags);
> > xilinx_vdma_start_transfer(chan);
> > + spin_unlock_irqrestore(&chan->lock, flags);
> > }
> >
> > /**
> > @@ -742,24 +704,16 @@ static void xilinx_vdma_issue_pending(struct
> dma_chan *dchan)
> > */
> > static void xilinx_vdma_complete_descriptor(struct xilinx_vdma_chan
> > *chan) {
> > - struct xilinx_vdma_tx_descriptor *desc;
> > - unsigned long flags;
> > + struct xilinx_vdma_tx_descriptor *desc, *next;
> >
> > - spin_lock_irqsave(&chan->lock, flags);
> > + if (list_empty(&chan->active_list))
> > + return;
> >
> > - desc = chan->active_desc;
> > - if (!desc) {
> > - dev_dbg(chan->dev, "no running descriptors\n");
> > - goto out_unlock;
> > + list_for_each_entry_safe(desc, next, &chan->active_list, node) {
> > + list_del(&desc->node);
> > + dma_cookie_complete(&desc->async_tx);
> > + list_add_tail(&desc->node, &chan->done_list);
> > }
> > -
> > - dma_cookie_complete(&desc->async_tx);
> > - list_add_tail(&desc->node, &chan->done_list);
> > -
> > - chan->active_desc = NULL;
> > -
> > -out_unlock:
> > - spin_unlock_irqrestore(&chan->lock, flags);
> > }
> >
> > /**
> > @@ -870,8 +824,11 @@ static irqreturn_t xilinx_vdma_irq_handler(int irq,
> void *data)
> > }
> >
> > if (status & XILINX_VDMA_DMASR_FRM_CNT_IRQ) {
> > + spin_lock(&chan->lock);
> > xilinx_vdma_complete_descriptor(chan);
> > + chan->idle = true;
> > xilinx_vdma_start_transfer(chan);
> > + spin_unlock(&chan->lock);
> > }
> >
> > tasklet_schedule(&chan->tasklet);
> > @@ -879,6 +836,45 @@ static irqreturn_t xilinx_vdma_irq_handler(int
> > irq, void *data) }
> >
> > /**
> > + * append_desc_queue - Queuing descriptor
> > + * @chan: Driver specific dma channel
> > + * @desc: dma transaction descriptor
> > + */
> > +static void append_desc_queue(struct xilinx_vdma_chan *chan,
> > + struct xilinx_vdma_tx_descriptor *desc) {
> > + struct xilinx_vdma_tx_segment *tail_segment;
> > + struct xilinx_vdma_tx_descriptor *tail_desc;
> > +
> > + if (list_empty(&chan->pending_list))
> > + goto append;
> > +
> > + /*
> > + * Add the hardware descriptor to the chain of hardware descriptors
> > + * that already exists in memory.
> > + */
> > + tail_desc = list_last_entry(&chan->pending_list,
> > + struct xilinx_vdma_tx_descriptor, node);
> > + tail_segment = list_last_entry(&tail_desc->segments,
> > + struct xilinx_vdma_tx_segment, node);
> > + tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
> > +
> > + /*
> > + * Add the software descriptor and all children to the list
> > + * of pending transactions
> > + */
> > +append:
> > + list_add_tail(&desc->node, &chan->pending_list);
> > + chan->desc_pendingcount++;
> > +
> > + if (unlikely(chan->desc_pendingcount > chan->num_frms)) {
> > + dev_dbg(chan->dev, "desc pendingcount is too high\n");
> > + chan->desc_pendingcount = chan->num_frms;
> > + BUG();
> > + }
> > +}
> > +
> > +/**
> > * xilinx_vdma_tx_submit - Submit DMA transaction
> > * @tx: Async transaction descriptor
> > *
> > @@ -906,11 +902,8 @@ static dma_cookie_t xilinx_vdma_tx_submit(struct
> > dma_async_tx_descriptor *tx)
> >
> > cookie = dma_cookie_assign(tx);
> >
> > - /* Append the transaction to the pending transactions queue. */
> > - list_add_tail(&desc->node, &chan->pending_list);
> > -
> > - /* Free the allocated desc */
> > - chan->allocated_desc = NULL;
> > + /* Put this transaction onto the tail of the pending queue */
> > + append_desc_queue(chan, desc);
> >
> > spin_unlock_irqrestore(&chan->lock, flags);
> >
> > @@ -973,13 +966,6 @@ xilinx_vdma_dma_prep_interleaved(struct dma_chan
> *dchan,
> > else
> > hw->buf_addr = xt->src_start;
> >
> > - /* Link the previous next descriptor to current */
> > - if (!list_empty(&desc->segments)) {
> > - prev = list_last_entry(&desc->segments,
> > - struct xilinx_vdma_tx_segment, node);
> > - prev->hw.next_desc = segment->phys;
> > - }
> > -
> > /* Insert the segment into the descriptor segments list. */
> > list_add_tail(&segment->node, &desc->segments);
> >
> > @@ -988,7 +974,7 @@ xilinx_vdma_dma_prep_interleaved(struct dma_chan
> *dchan,
> > /* Link the last hardware descriptor with the first. */
> > segment = list_first_entry(&desc->segments,
> > struct xilinx_vdma_tx_segment, node);
> > - prev->hw.next_desc = segment->phys;
> > + desc->async_tx.phys = segment->phys;
> >
> > return &desc->async_tx;
> >
> > @@ -1127,10 +1113,12 @@ static int xilinx_vdma_chan_probe(struct
> xilinx_vdma_device *xdev,
> > chan->dev = xdev->dev;
> > chan->xdev = xdev;
> > chan->has_sg = xdev->has_sg;
> > + chan->desc_pendingcount = 0x0;
> >
> > spin_lock_init(&chan->lock);
> > INIT_LIST_HEAD(&chan->pending_list);
> > INIT_LIST_HEAD(&chan->done_list);
> > + INIT_LIST_HEAD(&chan->active_list);
> >
> > /* Retrieve the channel properties from the device tree */
> > has_dre = of_property_read_bool(node, "xlnx,include-dre"); @@
> > -1198,6 +1186,7 @@ static int xilinx_vdma_chan_probe(struct
> > xilinx_vdma_device *xdev,
> >
> > list_add_tail(&chan->common.device_node, &xdev-
> >common.channels);
> > xdev->chan[chan->id] = chan;
> > + chan->idle = true;
> >
> > /* Reset the channel */
> > err = xilinx_vdma_chan_reset(chan);
> > --
> > 2.1.2
> >