Re: [PATCH 1/2] drm/panel: simple: Add support for Sharp LQ101K1LY04

[Joshua Clayton]

On Tue, 12 Jan 2016 13:55:35 -0800
Joshua Clayton <stillcompiling@xxxxxxxxx> wrote:
Ping?

FYI The dts for the board using this panel is now in linux-next.
Is there something more I need to do to get it queued?
They are my first patches for the drm subsystem, so I may be 
unfamiliar with the customs.

I just checked; the patches still apply cleanly against linux-next.

> Add simple-panel support for the  Sharp LQ101K1LY04i, which  is
> a 10 inch WXGA (1280x800) lvds panel.
> 
> Signed-off-by: Joshua Clayton <stillcompiling@xxxxxxxxx>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c index f97b73e..e01eacb 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1073,6 +1073,30 @@ static const struct panel_desc
> samsung_ltn140at29_301 = { },
>  };
>  
> +static const struct display_timing sharp_lq101k1ly04_timing = {
> +	.pixelclock = { 60000000, 65000000, 80000000 },
> +	.hactive = { 1280, 1280, 1280 },
> +	.hfront_porch = { 20, 20, 20 },
> +	.hback_porch = { 20, 20, 20 },
> +	.hsync_len = { 10, 10, 10 },
> +	.vactive = { 800, 800, 800 },
> +	.vfront_porch = { 4, 4, 4 },
> +	.vback_porch = { 4, 4, 4 },
> +	.vsync_len = { 4, 4, 4 },
> +	.flags = DISPLAY_FLAGS_PIXDATA_POSEDGE,
> +};
> +
> +static const struct panel_desc sharp_lq101k1ly04 = {
> +	.timings = &sharp_lq101k1ly04_timing,
> +	.num_timings = 1,
> +	.bpc = 8,
> +	.size = {
> +		.width = 217,
> +		.height = 136,
> +	},
> +	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
> +};
> +
>  static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = {
>  	.clock = 33300,
>  	.hdisplay = 800,
> @@ -1188,6 +1212,9 @@ static const struct of_device_id
> platform_of_match[] = { .compatible = "samsung,ltn140at29-301",
>  		.data = &samsung_ltn140at29_301,
>  	}, {
> +		.compatible = "sharp,lq101k1ly04",
> +		.data = &sharp_lq101k1ly04,
> +	}, {
>  		.compatible = "shelly,sca07010-bfn-lnn",
>  		.data = &shelly_sca07010_bfn_lnn,
>  	}, {