From: David Daney <david.daney@xxxxxxxxxx>
Some Cavium ThunderX processors require quirky access methods for the
config space of the PCIe bridge.
There are now three patches:
1) Refactor code in pci-host-generic so that it can more easily be
used by other drivers. This splits the driver for CAM and ECAM
access methods to a separate file from the common host driver code.
2) Add the ThunderX PCIe driver to external PCIe buses, which
leverages the code in pci-host-generic
3) Add ThunderX PCI driver for internel SoC buses used on early
ThunderX chip revisions.
Changes from v5: Added Acked-by Rob Herring for the device tree
binding in 3/3. Fixed typo and split large functions as suggested by
Bjorn Helgaas.
Changes from v4: Added patch 3/3. Stylistic changes to 2/3 suggested
by Bjorn Helgaas. When expanding config write width to 32-bits, mask
out unintened writes to W1C bits, also suggested by Bjorn Helgaas.
Changes from v3: Add some Acked-by, rebased to v4.5.0-rc1
Changes from v2: Improve device tree binding example as noted by Rob
Herring. Rename pcie-thunder-pem.* to pci-thunder-pem.* for better
consistency. Update MAINTAINERS to reflect the changes.
Changes from v1: Split CAM and ECAM code from common driver code as
suggested by Arnd Bergmann. Fix spelling errors in
pcie-thunder-pem.txt
David Daney (3):
PCI: generic: Refactor code to enable reuse by other drivers.
pci, pci-thunder-pem: Add PCIe host driver for ThunderX processors.
pci, pci-thunder-ecam: Add driver for ThunderX-pass1 on-chip devices
.../devicetree/bindings/pci/pci-thunder-ecam.txt | 30 ++
.../devicetree/bindings/pci/pci-thunder-pem.txt | 43 +++
MAINTAINERS | 9 +
drivers/pci/host/Kconfig | 18 ++
drivers/pci/host/Makefile | 3 +
drivers/pci/host/pci-host-common.c | 194 +++++++++++
drivers/pci/host/pci-host-common.h | 47 +++
drivers/pci/host/pci-host-generic.c | 181 +----------
drivers/pci/host/pci-thunder-ecam.c | 358 +++++++++++++++++++++
drivers/pci/host/pci-thunder-pem.c | 347 ++++++++++++++++++++
10 files changed, 1053 insertions(+), 177 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt
create mode 100644 Documentation/devicetree/bindings/pci/pci-thunder-pem.txt
create mode 100644 drivers/pci/host/pci-host-common.c
create mode 100644 drivers/pci/host/pci-host-common.h
create mode 100644 drivers/pci/host/pci-thunder-ecam.c
create mode 100644 drivers/pci/host/pci-thunder-pem.c